NoiseFit OL Crew Pro UM Smartwatch Instruction Manual

Instruction Manual

Please refer to this manual before using the product

WATCH OVERVIEW

• Noise Health
• Noise Buzz
• Clock
• Workouts
• Sport Record
• Reminders
• Music
• Weather
• Watch Faces
• Flashlight
• Calculator
• Settings

PACKAGE CONTAINS

NoiseFit Crew Pro Smartwatch x 1
Charging Cable x 1

CHARGE THE WATCH

CHARGING NOISEFIT CREW PRO SMARTWATCH

Before using your NoiseFit Crew Pro for the first time, charge the battery to its full capacity. Use the charging cable provided with the watch to charge. Ona single charge, NoiseFit Crew Pro can last up to 7 days.
Note: The battery life and time to fully charge your device may vary as per usage and other factors.
CHARGE NOISEFIT CREW PRO

• Plug the USB cable into a power adaptor.
• Plug the power adaptor into an electrical socket. (Power adaptor not included)
• Place the magnetic charger on the magnetic charging points of the watch.
• While your watch is charging, the screen will show its progress.
• Once the battery is fully charged, remove the charger.

TURN THE WATCH ON AND OFF

POWER ON

• Press and hold the upper side button for a few seconds to turn on the watch.

POWER OFF

• Press and hold the side button for a few seconds.
• Select ‘Power off’ and confirm to power off.

WAKING UP THE WATCH
To preserve the battery, the watch screen turns off when not in use.
To turn the screen back on, you can wake up the watch by:
-Pressing the upper side button
-Turning on the wrist sense

WATCH NAVIGATION

The NoiseFit Crew Pro smartwatch has a TFT colour touch screen.
Navigate the watch by tapping on the screen, swiping side to side, up and down and pressing the upper and lower side button.
FUNCTIONAL CROWN NAVIGATION

• Press the functional crown to turn on the display.
• From the home screen, rotate the functional crown to scan through the watch faces.
• From the main menu, rotate the functional crown to navigate through the various feat.

BUTTON NAVIGATION
From the home screen press the lower side button to go to sports mode directly.
HOME SCREEN NAVIGATION
The home screen is the watch face.
From the home screen:

• Swipe right to access widgets
• Swipe left to access shortcuts.
• Swipe up to go to the quick settings menu.
• Swipe down to check your message notifications.

SETUP

Before pairing, make sure that your smartphone and smartwatch are next to each other.
The app will ask for personal information such as height, weight and sex to calculate your stride length, distance covered and calorie burn rate.

• Turn on Bluetooth and the location on your mobile device.
• On your smartphone, download the NoiseFit app from the Play store or the App store and install it.
• Create an account or log in using an existing account.

Note: Ensure that your smartphone is running on Android 8.0 & + or iOS 10

• and is connected to mobile data or a Wi-Fi network.

PAIR THE WATCH

• Open the NoiseFit app and allow the Bluetooth and GPS positioning to be turned on.

• Feed in your personal information and health goals in the app.

• Go to the ‘Pair Device’ page in the app, select the watch name and MAC address and link the watch.
  Or you can follow the steps below:

• Turn on the watch.

• Scan the QR code from the NoiseFit app on your phone.

• Select ‘Pair with device’ and wait for it to pair.

• Select ‘Add Device’. Choose your device from the range of devices.

On iOS: Choose Bluetooth pairing when you receive a pairing prompt.
On Android: Connect it directly.

CONNECTIVITY

BT CALL CONNECTIVITY
To establish Bluetooth calling connectivity, follow these steps.
Automatic Connection
After pairing the watch with the NoiseFit app, the watch’s calling Bluetooth would be activated. Now connect it with your phone’s Bluetooth to use the calling feature conveniently.
Manual Connection
In case the Bluetooth calling connectivity has not been established earlier, you’ll have to do the steps manually.

• Go to Settings.
• Search for device and pair your smartphone to attend your calls from the watch.

BT CALL CONNECTIVITY REMOVAL
In Android devices, to remove the Bluetooth connection, you can unpair from the app and the phone Bluetooth settings.

• Go to the phone’s Bluetooth settings and forget NoiseFit Crew Pro_Phone.
  In iOS devices, to remove the Bluetooth connection, you can unpair from the app and the phone Bluetooth settings.

• Go to the phone’s Bluetooth settings and forget NoiseFit Crew Pro and NoiseFit Crew Pro Calling.

WATCH FEATURE

NOISE HEALTH
Noise Health Suite has a collection of wellness features that takes a holistic route. ACTIVITY
You can check your daily activity progress in terms of the calories burned, distance covered, active time and steps taken. HEART RATE
NoiseFit Crew Pro supports 24/7 heart rate tracking.
You can select the measurement frequency in the app settings. To measure your heart rate in real-time, go to ‘Heart Rate’ monitor and tap on ‘Tap to Measure.
You can view the all-day data on the watch and app.
Note: Make sure your arms and wrists are still and there is no space between your watch and the wrist. SPO2
NoiseFit Crew Pro supports the viewing of the highest and lowest blood oxygen level of the day. To measure your blood oxygen level in real-time, go to the ‘SpO2’ monitor and let it measure.
Note: Make sure your arms and wrists are still, and there is no space between your watch and the wrist.

SLEEP
You can view your most recent sleep record and sleep quality in various sleep stages in the NoiseFit app. The feature will measure the device records of the user’s sleep cycle, sleep states (light and deep sleep), wake time and REM. BREATHE
This feature helps you adjust your breathing rhythm as per your convenience. You can choose from 3 speeds (fast, moderate and slow) to adjust your breathing duration. Go to the ‘Breathe’ feature, choose the time duration and speed and tap on start to enter the cycles of breathing and inhalation. STRESS
NoiseFit Crew Pro supports 24-hour stress level measurement and viewing of all-day measurement data. To measure the stress levels in real-time, go to the ‘Stress’ feature and wait for it to measure.
Note: Make sure your arms and wrists are still and there is no space between your watch and the wrist. NOISE BUZZ
You can use this feature to manage calls from the watch.
Make sure your watch is connected with your smartphone via Bluetooth. Go to Noise Buzz. Choose to dial from the dial pad or the contact list and make calls.
Note: If the watch is connected to your smartphone via Bluetooth, all calls will be directed to the watch. During an active call, touch the call switching icon on the watch to switch from the watch to phone and attend the call from your phone. ALARM
You can set alarms in the NoiseFit app and they will sync with the watch. You can add, delete, and enable/disable alarms. You can also label alarms to identify them. TIMER
You can set a timer with a pre-set duration on the watch and the timer will remind you when the time is up. STOPWATCH
A stopwatch can be set on the watch. You can also set lap times on the stopwatch. WORLD CLOCK
You can see the time of any city in the world on the watch.
Open the NoiseFit app. Add the city and see its time.

WORKOUTS
You can choose from 10 workout modes. You can take your pick and add more workouts from the app.
This feature also lets you control music while working out. You can also view the exercise records in the app. SPORT RECORD
You can check the progress report of your workouts in this feature.
REMINDERS
You can add or edit reminders on the app. MUSIC
You can control your favourite songs and podcasts that play from your phone, right on your wrist as long as the watch is connected with the NoiseFit app on your phone.
You can play/pause music, go to the next/previous track and increase/decrease the volume. WEATHER
NoiseFit Crew Pro supports 5-day weather viewing in a location of your choice as long it is synced with the NoiseFit app. You can view today’s current weather and for the next 4 days as well. Open the Weather app on your watch and change the location to see the weather of your current location. WATCH FACES
You can switch between different watch faces in the watch, choose and download cloud-based or animated watch faces. You can also create your own watch faces in the NoiseFit app. Changing The Watch Face
Give your screen a personalised style by changing or customising the watch face from the NoiseFit app or the watch.
On The Watch
Touch and hold the home screen. Swipe and choose from the watch faces. In The App
Go to watch faces, select the watch face of your choice and tap ‘save’ to change the watch face.
FLASHLIGHT
You can use this feature to turn on the screen brightness and see your surroundings better. Go to the Flashlight. Tap to turn on.
CALCULATOR
You can use this feature to do basic calculations.
Go to Calculator and feed in digits and start calculating. SETTINGS
BRIGHTNESS
You can set the watch’s brightness. RINGTONE VIBRATION
You can set the vibration level to get an alert of any notification. You can also choose to put the watch on silent mode.
WRIST AWAKE
Turn on the wrist awake and set the auto screen off as per your preference.
BRIGHT SCREEN TIME
You can set the bright screen time duration as per your preference.
DND
You can set the DND duration on the watch. Feed in the start and end time and set.
MENU VIEW
You can set the Main menu as per your preference.
AUTO SPORTS DETECTION
You can turn on the auto sport detection and let the watch track your movement. ABOUT CALLS
Follow the onscreen instructions to set or remove the Bluetooth call connectivity.
DEVICE INFORMATION
You will find all the information related to the device here, including the device name, Bluetooth name and version.
QR CODE
Scan the QR code to connect with the app.
REBOOT
You can choose to reboot to restart the watch.
POWER OFF
You can choose to power off to restart the watch.
RESET
You can choose to reset. Do note if you choose to reset, all your data and settings will be erased.

QUICK SETTINGS
You can swipe from the watch’s home screen to gain Quick Settings access. RINGING MODE
DIMMING
FIND PHONE
DND
BATTERY SAVING MODE
SETTINGS

DEVICE INFORMATION AND TIPS

DEVICE INFORMATION
The NoiseFit Crew Pro smartwatch contains the following:

• 1.4″ HD Display
• SpO2 monitor
• Stress monitor
• IP68 waterproof
• 120 sports modes
• 22mm quick change pins

The NoiseFit Crew Pro smartwatch stores your activity data for up to 4 days in between the time you sync your watch to the NoiseFit app. Activity data includes your steps, distance, calories, active minutes, heart rate, sleep duration and workout data. We recommend syncing the watch to the app daily.
TIPS
How do i update my NoiseFit Crew Pro?
You can update your NoiseFit Crew Pro via the NoiseFit app. Go to ‘My Profile’ and select ‘Check for updates.’
How do I find my watch’s current firmware version?
You can find the watch’’s current firmware on the watch. Go to Settings on the NoiseFit app. Select Device information, choose Check for updates and update if any update is available.
How do! save battery?
Follow these simple steps to save NoiseFit Crew Pro battery.

• Minimise the screen brightness
• Limit the notification you receive from the NoiseFit app.
• How does the watch estimate how many calories have been burned?
• NoiseFit Crew Pro estimates how many calories you’ve burned based on the physical data you entered when you set up your account.

How dol change my activity goals?
You can do it through the NoiseFit app.
Go to ‘My Profile’ Go to ‘Setup’ and select ‘My Objectives. Change your goals and confirm.
How do! log my weight?
You can log in your weight the first time you set up your NoiseFit app.
However, you can update the weight later via the NoiseFit app. Go to My Profile, select Personal Information and change or update your weight. You can update your birthday, height, country and e-mail ID as well.
DISPOSAL AND RECYCLING INFORMATION
Electrical and electronic devices may not be disposed of with domestic waste.
Consumers are obliged by law to return the electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details of this are defined by the national law of the respective country. By recycling, reusing materials or other forms of utilising old devices, you are making an important contribution to protecting our environment.

REGULATORY INFORMATION

USA: Federal Communications Commission (FCC) Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

• This device may cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this 76 equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the Max is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The NoiseFit Crew Pro watch is not a toy.
The watch contains small components that could be a choking hazard and are not intended for use by small children or pets. Unless otherwise specified, devices and services are not medical devices and are not intended to diagnose, treat, cure or prevent any disease. We develop products and services to track daily activity and wellness information as accurately as possible. The accuracy of devices is not intended to be equivalent to medical devices or scientific measurement devices.
In some cases, prolonged use of products may cause skin irritation.
Prolonged contact may contribute to skin irritation or allergies. To reduce the possibility of irritation, keep the watch and watch band clean and dry. Don’t wear it too tight and give your wrist a rest by removing the watch after an extended period of wear. If you feel soreness, tingling, numbness, burning or stiffness in your hands or wrists while or after wearing the watch, please immediately discontinue use.

MAINTENANCE INSTRUCTIONS

• Keep the device dry and clean regularly and especially after prolonged use as moisture and dirt can build up underneath the band and can cause skin irritation.
• Do not wear the device too tight but make sure that the bottom sensor is lightly in contact with your skin and there is a gap of about one finger’s width between the wrist strap and your wrist.
• Do not use household cleaners to clean the device. Use soap-free cleaners instead.
• For stains that are difficult to remove, it is recommended to scrub with alcohol.
• The device is not suitable for diving, swimming in the sea or sauna; it is suitable for swimming pools, showers (cold water) and swimming in shallows.
• Keep it away from direct sunlight, high temperatures or humid conditions as it may damage the band over time.

CUSTOMER SUPPORT

If you experience any problem with the watch, it may be fixed by restarting your watch. For any assistance, please reach out to us at link: https://support.gonoise.com/support/home
User Manual for NoiseFit Crew Pro

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>