8BitDo B0B9BGJVLL Ultimate Bluetooth Controller Instruction Manual

Table of Contents

8BitDo B0B9BGJVLL Ultimate Bluetooth Controller Instruction Manual

press home button to turn on the controller
hold home button for 3 seconds to turn off the controller
hold home button for 8 seconds to force shutdown the controller the controller will turn off when placed on the dock
plug the 2.4G receiver into the charging dock, then connect it to your Windows device or Switch dock via the USB cable for better user experience
LED lights indicate the player number, 1 LED indicates player 1, 2
LEDs indicate player 2. 4 is the maximum number of players the controller supports for Windows, 8 players for Switch

Switch system needs to be 3.0.0 or above
NFC scanning, IR camera, HD rumble, notification LED are not supported Bluetooth connection

turn the mode switch to Bluetooth *
press home button to turn on the controller
hold the pair button for 3 seconds to enter its pairing mode, status LED starts to blink rapidly.(this is required for the very first time only)
go to your Switch home Page to click on Controllers, then click on Change Grip/Order
status LED becomes solid when connection is successful

OTG cable is required for Switch Lite
go to System Setting > Controller and Sensors > Turn on [Pro Controller Wired Communication]

connect the 2.4G receiver to the USB port of your Switch dock
turn the mode switch to 2.4G
press home button to turn on the controller, wait till the controller is successfully recognized by the system to play, status LED stays solid

OTG cable is required for Switch Lite
go to System Setting > Controller and Sensors > Turn on [Pro Controller Wired Communication] connect your controller to Switch dock via USB cable, wait till the controller is successfully recognized by your Switch to play, status LED stays solid

connect the 2.4G receiver to the USB port of your Window device
turn the mode switch to 2.4G
press home button to turn on the controller, wait till the controller is successfully recognized by your Windows device to play

connect your controller to Windows device via USB cable, wait till the controller is successfully recognized by the system to play, status LED stays solid
Turbo function

the star button equals to screenshot function by default when it’s connected to Switch, you can change it to turbo function in the 8BitDo Ultimate Software.
Status LED blinks continuously when the button with turbo functionality is pressed.
D-pad, joysticks are not included hold the button you would like to set turbo functionality to, then press the star button to activate/deactivate its turbo functionality

22 hours of play time with a 1000mAh built-in battery pack, rechargeable with 2-3 hours charging time

controller status- LED indicator-
low battery → red LED blinks
battery charging → red LED stays solid
battery fully charged → red LED turns off

charging dock status -LED indicator-
battery charging → white LED stays solid
battery fully charged → white LED turns off

charging time with the controller on the dock is the same as charging via USB cable

press profile switch button to switch between 3 custom profiles. The profile indicator will not light up when using the default setting
it gives you elite control over every piece of your controller: customize button mapping, adjust stick & trigger sensitivity, vibration control and create macros with any button combination. Please visit support.8bitdo.com for the application

press profile switch button to switch between 3 custom profiles. The profile indicator will not light up when using the default setting

it gives you elite control over every piece of your controller: customize button mapping, adjust stick & trigger sensitivity, vibration control and create macros with any button combination. Please visit support.8bitdo.com for the application