TRANSPLANT Ver2 Shot Glass Dispenser with 6 Shot Glasses Set Installation Guide
- June 15, 2024
- TRANSPLANT
Table of Contents
TRANSPLANT Ver2 Shot Glass Dispenser with 6 Shot Glasses Set
Dispenser Structure & Installation
- Please assemble according to the diagram above, Install all parts tightly, Especially the shunt umbrella, un-tight will cause insufficient suction.
- When pouring, please Submerge the beverage Over the steel ball, otherwise the dispenser may not work or be uneven.
Use Method
- Method 1: Take off the magnetic top, pour the drink to cover the steel ball but not exceed the shunt umbrella, then (rotate and) put the magnetic top back. The drink will then be evenly distributed to the six shot glasses.
- Method 2: Keep the magnetic top on the umbrella, just pour the drink to submerge the shunt umbrella. Then the drink will be evenly dispensed.
- Method 3 (spare, if you accidentally lose the top): You can take out the steel ball, just pour the drink to submerge the shunt umbrella. Then the drink will be distributed. (Note: this method may be a bit uneven)
ABOUT COMPANY
- More Visit https://transplanteu.com
- Customer Service: support@transplanteu.com
References
Read User Manual Online (PDF format)
Loading......