SONOS ERA300 Wall Mount Bracket Instruction Manual
- June 15, 2024
- Sonos
Table of Contents
SONOS ERA300 Wall Mount Bracket Instruction Manual
Whats In The Box
Tools Required
-
Always Wear Safety Glasses
-
Pencil
-
Level
-
Phillips Screwdriver
-
Electric Drill
Wood Stud Installation
-
Stud Finder
-
1/8 in. (4mm) Drill Bit
Drywall Installation
-
Hammer
-
5/16 in. (8mm) Drill Bit
Assembly Instructions
Please refer to the Safety Precautions and Installation Guidelines before starting the installation.
For Upside-Down Follow 3b Onwards
Tighten Both Screws Fully
Drywall & Tile
Brick & Concrete
UPRIGHT ONLY
Tighten Both Screws Fully
SOUNDBASS (UK) CO., LIMITED
RM1104, CRAWFORD HOUSE
70 QUEENS ROAD
CENTRAL
HONG KONG
support@soundbass.co
www.soundbass.co/fb-support
Thank you for buying the Soundbass®
Wall Mount for The Sonos® ERA300 TM
Soundbase (UK) Co., Limited and its affiliated corporations and subsidiaries (collectively knewes as “Soundbass” Intend to make this manual accurate and complete. However: Soundtiass matias no claim that the information contained herein covers all detalk, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notior or obligation of any kind. Soundbass makes no representation of wemanty, expressed or implied, regarding the information contained herein. Soundbies assumes no responsibility for accuracy completeness or sufficiency if the information contained in this document,
©2023 Soundbase (UK) Co., Limited. All Rights Reserved.
SOUNDBASS is a Soundbase (UK) Co., Limited brand and a registered trademark
owned by Soundbase (UK) Co., Limited. Soundbase (UK) Co., Limited, RM 1104
Crawford House, 70 Queens Road, Central, Hong Kong Sonos & ERA300 are
trademarks of Sonos Inc. Soundbass is not affilated with Sonos Inc.
TripleGrip Is a trademark of Cobra Anchors Co. Ltd. Soundbass is not affilated
with Cobra Anchors Co. Ltd Made In China