GLOBO 67181H BEZZY Hanging Light Instruction Manual
- June 15, 2024
- GLOBO
Table of Contents
GLOBO 67181H BEZZY Hanging Light
Product Information
Specifications:
- Model: 67181H
- Light Source: 30W LED
- Voltage: 36V
- Power Supply: 220-240V~ 50/60Hz
- Color Temperature: 6000K, 4000K, 2700K
- Maximum Length: 5m
Product Usage Instructions
Installation:
- Ensure that the power supply is turned off before installation.
- Mount the product securely in the desired location using the provided mounting hardware.
- Connect the power supply to the product according to the voltage specifications.
Turning On/Off:
To turn on the product, simply switch on the power supply. To turn off the
product, switch off the power supply.
Adjusting Color Temperature:
This product offers three different color temperature options: 6000K, 4000K,
and 2700K. To adjust the color temperature, follow these steps:
- Locate the color temperature adjustment switch on the product.
- Slide the switch to the desired color temperature setting.
Maintenance:
This product does not require any specific maintenance. However, if cleaning
is necessary, follow these steps:
- Switch off the power supply and disconnect it from the electrical outlet.
- Use a soft, dry cloth to gently wipe the product surface.
- Avoid using any abrasive or chemical cleaners that may damage the product.
Replacing Parts:
The LED light source and control gear of this product are not replaceable.
Please contact the manufacturer for any repairs or replacements.
FAQ:
-
Q: Can I replace the LED light source?
A: No, the LED light source of this product is not replaceable. -
Q: Can I replace the control gear?
A: No, the control gear of this product cannot be replaced. -
Q: How do I adjust the color temperature?
A: To adjust the color temperature, locate the color temperature adjustment switch on the product and slide it to the desired setting. -
Q: How should I clean the product?
A: Switch off the power supply, disconnect from the electrical outlet, and use a soft, dry cloth to gently wipe the product surface. Avoid using abrasive or chemical cleaners.
SPECIFICATION
Assembly Instruction
How To Use
Light source
- The light source is not interchangeable because it is determined by the surrounding product design.
- This product contains a light source of energy efficiency class
. - The control gear cannot be replaced.
- The LED – light source cannot be replaced.
GLOBO Handels GmbH
- Gewerbestrasse 3 A-9184 Sankt Peter Austria.
- www.globo-lighting.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>