Yealink CP900 USB Speaker Phone User Guide
- June 15, 2024
- Yealink
Table of Contents
USB Speakerphone
CP900
Quick Start
Guide(V1.0)
Package Contents
Charging Your CP900
Connect the CP900 to a USB power source. The CP900 battery lasts for up to 12 hours of talk time and 3 hours to fully charge.
Viewing the Battery Status
Tap to view the battery status.
Connecting Your CP900
Connect to the mobile phone
Hold the Bluetooth button for 2 seconds and pair to your smartphone.
The bluetooth range is 10m.
To disconnect or reconnect, tap the Bluetooth button again.
Connect to PC via Bluetooth
Connect the CP900 into a USB port on your PC. The CP900 and the BT50 are pre-
paired and ready to use out of the box. The bluetooth range is 30m.
For the CP900 to work correctly you may need to set the CP900 as the playback
device in your operating system’s audio settings.
Connect to PC via USB Cable
For the CP900 to work correctly you may need to set the CP900 as the playback
device in your operating system’s audio settings.
Place Your CP900
Position the speakerphone in the center of the table, up to 2m/6ft from each participant. A single CP900 is ideal for up to 6 people.
Using Your CP900
| Task | Do |
|---|---|
| Power on or off | Long tap for 3 seconds |
| Answer a call | Tap |
| End or reject a call | Tap |
| Volume up/down | During a call, tap |
| Mute/unmute microphone | During a call, tap |
| Hold a call | During a call, tap |
| Connect Bluetooth device | Tap |
| Reset to the factory | Hold and for 6 seconds. |