Smarter Surfaces Smart Ambient Light Rejecting Projector Screen Paint User Guide
- June 15, 2024
- Smarter Surfaces
Table of Contents
SMART AMBIENT LIGHT REJECTING
PROJECTOR SCREEN PAINT
APPLICATION GUIDE
Smart Ambient Light Rejecting Projector Screen Paint is suitable for use on
plaster, wallboards, wood, metal concrete and composites. For interior use
only.
Each kit covers an area of 4.5m2 / 48 sq. ft. This will create the following
screen sizes: 120” or 279cm x 157cm (109.8” x 61.8”) – at aspect ratio 16:9
All products within the Smarter Surfaces Projection Range have a certified
gypsum Surface Finish Quality Standard of US 5/ EU Q4 guaranteeing a smooth,
seamless surface ready for use with a high-quality projector for professional
projection results.
HOW TO APPLY Smart Ambient Light Rejecting Projector Screen Paint
Smart Ambient Light Rejecting Projector Screen Paint is applied in one coat
-
PREPARE THE SURFACE
• All surfaces to be painted should be clean, dry and free from loose materials.
• Measure the area you wish to paint and clearly mark it using masking tape.
• Prime bare, untreated surfaces with one coat of Smart White Primer.
• Once primed, lightly sand the surface. -
• • Ensure the base is smooth and free from surface defects (lightly sand if required).
• Apply the first coat with a mohair or lint free short pile roller sleeve.
• Allow to dry before applying the second coat. -
DRYING TIME
• Once all coats are applied Smart Ambient Light Rejecting Projector Screen Paint will be ready to use in 24 hours.
PRODUCT LIABILITY CLAUSE
The sale of our products is subject to our General Terms
and Conditions available on
www.smartersurfaces.com
SUPPORT
EMAIL:
[email protected]
PHONE (IRE):
+353 1 412 6200
WEBSITE:
www.smartersurfaces.com