IKEA UNDERVERK Built In Kitchen Hood Instruction Manual
- June 15, 2024
- Ikea
Table of Contents
IKEA UNDERVERK Built In Kitchen Hood
Product Information
Specifications
- Product Name: UNDERVERK sl sr
- Language: Hrvatski
Description
The UNDERVERK sl sr is a kitchen appliance designed for installation and use in both extraction and recirculation modes. It features LED lighting, a grease filter, and a control panel for adjusting the motor speed and turning on/off the lights.
Installation
Before installing and using the appliance, it is important to read the user manual carefully. Ensure that all screws and fastening elements are properly installed to avoid any risk of electric shock. The appliance can get hot during use, so handle with caution.
There are two installation options:
- Extraction Mode: In this mode, cooking steam is sucked out through an exhaust pipe installed on the outlet of the appliance. Make sure the exhaust pipe is connectedproperly.
- Recirculation Mode: In this mode, the air is filtered through one or more filters and then recirculated back into the room. Ensure good ventilation for optimal performance.
Cleaning and Maintenance
Before cleaning or performing any maintenance, make sure to turn off the
appliance or disconnect it from the power source. Use a damp cloth and neutral
detergent to clean the appliance.
The long-lasting charcoal filter can be washed and renewed every 3-4 months
(or more frequently if the appliance is heavily used) for a maximum of 8
renewal cycles. The grease filters should be cleaned every 2 months (or more
frequently for intense use) and can be washed in a dishwasher.
For bulb replacement, contact an authorized service center.
Product Usage Instructions
Step 1: Installation
Follow the installation instructions provided in the user manual. Ensure
that all screws and fastening elements are properly installed according to the
instructions.
Step 2: Mode Selection
Determine whether you want to use the appliance in extraction mode or
recirculation mode based on your kitchen setup and preferences.
- Extraction Mode: Connect the exhaust pipe to the outlet of the appliance and direct it outside the kitchen area.
- Recirculation Mode: Install the required filters and ensure good ventilation in the room for optimal performance.
Step 3: Operating the Appliance
To turn on the lights, push the handle outwards until it clicks into place.
To turn off the lights, push the handle inwards to its original position.
To adjust the motor speed for suction, push the handle outwards and rotate it
to select the desired speed level.
Step 4: Cleaning and Maintenance
Before cleaning or performing any maintenance, make sure to turn off the
appliance or disconnect it from the power source.
Clean the appliance using a damp cloth and neutral detergent. Wash the grease
filters every 2 months (or more frequently for intense use) in a dishwasher.
The long-lasting charcoal filter can be washed and renewed every 3-4 months
(or more frequently if heavily used) for a maximum of 8 renewal cycles.
FAQ
Q: What should I do if there is a malfunction?
A: If you encounter a malfunction, try troubleshooting the issue yourself
first. If you are unable to resolve the problem, contact an authorized service
center for assistance.