Holmes 32510380 12 Inch Table Fan Instruction Manual
- June 15, 2024
- Holmes
Table of Contents
Holmes 32510380 12 Inch Table Fan
Specifications
- Item : 12211
- Model : 32510380
- Printed In China
- 12 Inch Table Fan
Product Information
The 12 Inch Table Fan is a household appliance designed for cooling and air circulation. It comes with a replaceable fuse for safety and protection against electrical issues. The fan is intended for indoor use only and should not be used outdoors, in windows, or in commercial or industrial applications. The fan has a 3-year limited warranty from the original date of purchase, covering workmanship and defects in material.
Important Safety Instructions
- Read all instructions before using this appliance.
- Use the fan only for purposes described in the instruction manual.
- To protect against electrical shock, do not immerse the unit in water.
- Do not let the cord hang over the edge of a table, counter, or come in contact with hot surfaces or high traffic areas.
- To disconnect, grip the plug and pull it from the wall outlet. Never yank on the cord.
- Always use the fan on a dry, level surface.
- Do not operate the fan until it is fully assembled with all parts properly in place.
- Do not use the fan in windows.
- Do not use the fan outdoors.
Assembly / Operation
Before using the table fan, make sure to assemble it properly according to
the provided instructions. Once assembled, follow these steps to operate the
fan
- Plug the fan into a standard electrical outlet.
- Turn the fan on using the power switch or control buttons.
- Adjust the fan speed and direction as desired using the available settings.
- To turn off the fan, switch off the power or press the designated power-off button.
Maintenance
To ensure the proper functioning and longevity of the table fan, follow
these maintenance guidelines
- Regularly clean the fan blades and housing to remove dust and debris buildup. Use a soft cloth or brush for cleaning.
- Do not disassemble the fan for cleaning. Use a vacuum cleaner or compressed air to remove dust from hard-to-reach areas.
- Do not use harsh chemicals or solvents for cleaning as they may damage the fan’s surface.
- Store the fan in a dry and clean location when not in use.
Warranty Information
This table fan comes with a 3-year limited warranty from the original date
of purchase. The warranty covers workmanship and defects in material. If the
product fails to operate under normal use, contact the customer service
department at info@getholmesfans.com with
proof of purchase to claim a refund or replacement. Please note that claims of
damage caused by misuse or modifications of the product may be denied by Star
Elite Inc.
User Servicing Instructions – Replacing the Fuse
If the replaceable fuse blows, follow these instructions to replace it
- Unplug the fan by grasping the plug and removing it from the receptacle or outlet device. Do not pull on the cord.
- Open the fuse cover located on the top of the plug by sliding the cover towards the prongs using your thumb or a flathead screwdriver.
- Ensure the fuse cover is completely open before attempting to remove the fuse.
- Carefully remove the fuse by using a small screwdriver to pry it from the compartment at the metal ends of the fuse.
- Place the plug on a solid, flat surface and insert a new 2.5 Amp, 125 Volt fuse into the fuse compartment.
- Use a small screwdriver to secure the metal ends of the fuse into the compartment.
- Slide the fuse cover closed completely. If the cover is difficult to close, ensure the fuse is securely in place by pressing on the metal ends.
FAQ
-
Q: Can I use this fan outdoors?
A: No, this fan is designed for indoor use only and should not be used outdoors. -
Q: What should I do if the fan stops working?
A: If the fan fails to operate under normal use within the warranty period, contact our customer service department at info@getholmesfans.com with proof of purchase for assistance with a refund or replacement. -
Q: Can I clean the fan by disassembling it?
A: No, do not disassemble the fan for cleaning. Use a soft cloth or brush to clean the blades and housing, and a vacuum cleaner or compressed air for hard-to-reach areas.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be taken including the following
- Read all instructions before using this appliance.
- Use fan only for purposes described in the instruction manual.
- To protect against electrical shock do not immerse unit, plug or cord in water or spray with liquids and plug the appliance directly into a 120V AC electrical outlet.
- Close supervision is necessary when any appliance is used near children.
- Not intended for use by children.
- Unplug from outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and before cleaning.
- Avoid contact with moving parts.
- Do not operate in the presence of explosive and/or flammable fumes.
- To avoid fire hazard, NEVER place the cord under rugs or any parts near an open flame, cooking or other heating appliance.
- Do not operate any appliance with a damaged cord or plug after the appliance malfunctions, or has been dropped/damaged in any manner. Discard fan or contact customer service.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runner, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
- The use of attachments not recommended or sold by the appliance manufacturer may cause hazards.
- Do not let the cord hang over the edge of a table, counter or come in contact with hot surfaces or leave exposed to high traffic areas.
- Do not use outdoors.
- To disconnect, grip plug and pull from wall outlet. Never yank on cord.
- Always use on a dry, level surface.
- Do not operate fan until fully assembled with all parts properly in place.
- This product is intended for household use ONLY and not for commercial or industrial applications.
- WARNING: To reduce the risk of electrical shock and injury to persons, do not use in window.
- WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
- WARNING : To reduce the risk of fire, electric shock or injury to persons, do not use replacement parts that have not been recommended by the manufacturer (e.g. parts made at home using a 3D Printer).
- This fan employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation.
If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short circuit may be present and the product should be discarded or contact customer service.
PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
- THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
- DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY WAY.
ASSEMBLY / OPERATION
ASSEMBLY INSTRUCTIONS (SEE FIGURE 1)
NOTE: MAKE SURE YOU REMOVE ALL CONTENTS OF THE PACKAGE. PLEASE CHECK PACKAGING MATERIALS FOR PARTS THAT COULD BE REQUIRED TO OPERATE THIS FAN.
Estimated assembly time: 5–10 minutes
- Pull power cord (L) through base opening (K) and secure into notch at the back of the base.
- To assemble the base, insert the Control Panel (J) and Power Cord (L) into the Fan Base (K).
- Line up the center hole of the Rear Grill (E) with the Motor Shaft (F) on the Motor Housing (G).
- Secure Rear Grill (E) to Motor Housing (G) with Rear Grill Mounting Nut (D). Turn clockwise to tighten.
- Secure Fan Blade (C) to Motor Shaft (F) with the Blade Cap (B). Align blade notches and push into the Motor Shaft (F) cross pin. Turn counterclockwise to tighten.
- Align the Front Grill (A) with the Rear Grill (E) so the logo is in the centre. Secure in place by lightly pushing together, an audible click will confirm alignment.
MAINTENANCE
USER SERVICING INSTRUCTIONS
Follow these instructions to safely and correctly care for this fan.
REPLACEABLE FUSE
If the (2.5 Amp, 125 Volt) replaceable fuse blows, please visit our website at
www.getholmesfans.com for information on how
to order a new fuse. Follow the below instructions to replace the fuse on the
plug.
REPLACING THE FUSE
-
Unplug the fan.
Grasp plug and remove from the receptacle or other outlet device.
NOTE : Do not unplug by pulling on cord. -
Open fuse cover, located on the top of the plug, by using your thumb or a flathead screwdriver to slide the cover towards the prongs.
NOTE : Ensure the fuse cover is completely open before attempting to remove fuse. -
Remove fuse carefully by using a small screwdriver to pry it from the compartment at the metal ends of the fuse. (See Figure 2)
-
Place plug on a solid, flat surface. Insert new 2.5 Amp, 125 Volt fuse into fuse compartment. Use a small screwdriver to secure the metal ends of the fuse into the compartment.
CAUTION : Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse. -
Slide fuse cover closed completely.
NOTE : If fuse cover is difficult to close, make sure the fuse is completely secured in place by pressing on metal ends of the fuse.
CAUTION : Risk of fire. Do not replace the attachment plug. It contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.
WARRANTY INFORMATION
3 YEAR LIMITED WARRANTY
This device has a limited warranty of 3 years from the original date of
purchase against workmanship and defects in material. If under normal use,
your product fails to operate, please contact our customer service department
at info@getholmesfans.com. A refund or
replacement will be provided to you with proof of purchase. Star Elite Inc.
may deny claims of damage caused by misuse or modifications of this product.
Warranty Service
- Contact our customer service at www.getholmesfans.com/en/contact-us or info@getholmesfans.com or 1-866-769-3166 (8:30 am – 5:00 pm EST) Monday-Friday.
- Our team will be happy to assist.
- www.getholmesfans.com
- © 2023 Sunbeam Products, Inc. All rights reserved.
- HOLMES® is a registered trademark of Sunbeam Products, Inc. used under license.
- Distributed by Star Elite Inc., Montreal, Canada H3B 3X9
- SEH024-090623
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>