RETLLAS 40G Large Fireproof Safe Box Instruction Manual

Table of Contents

There are two ways to open:

Please take off the cover(on the right of the panel), put 4 batteries of 1.5V in the panel battery box, then input the factory password III 2341, in 5 seconds, turn the knob to open the door.
It is opened with the emergency key, and the method is as follows:

RETLLAS-40G-Large-Fireproof-Safe-Box-fig-3

Please keep the emergency keys out of the safe

EE series set the code

Put 4 batteries of 1 .5V in the battery box (on the panel or on the back of the door)
Set or change the master code While the door is opened, press the button “O” “O”
(twice”O”), then press the reset button (on the left side of the back of the door), and the screen is awakened, then input any 1-Sdigits you want, press”#” to confirm, display “in” on the screen, indicating that the new code has been accepted and stored.
Set or change the personal code While the door is opened, press the reset button( on the left side of the back of the door), and the screen is awakened, then input any 1-8 digits you want, and press “#” to confirm, display “in” on the screen, indicating that the new code has been accepted and stored.

RETLLAS-40G-Large-Fireproof-Safe-Box-fig-5

Input the code, If the password is correct, it displays “open” and then turns the knob to open the door. If the password is wrong, it will display “Error” and can be reentered.
In 5 seconds, rotate the knob and pull out, the door will be opened.
Close the door, then rotate the knob left anti-clockwise to lock the safe.

Notice

If 3 incorrect codes are input continuously, the beeps sound for 60s, If another 3 incorrect codes are input again after 60s, then the sound for another 60s, and display “hold” on the screen
When the power icon on the screen displays low, it indicates that you should change the batteries.
If you forgot the code, use the emergency key to open the safe as the first opening, and then press the reset button(on the left side of the back of the door) to reset the code.
The “#” on the operation panel is confirmed, and the “” on the operation panel is the delete key, It means that when you press the key, one previous input is deleted. If you press the”#” + “*” keys, the password you will follow will not be visible.
After any key is pressed for 20 seconds, no subsequent key input into, the system will be sleep, and the front input cleared
If your emergency key is inadvertently lost, please find the product serial number on the door, and provide relevant information when purchasing, and we will provide you with a paid key service

Please keep the emergency keys out of the safe.
If you need to be fixed into the wall, please refer to the following fixed method:

RETLLAS-40G-Large-Fireproof-Safe-Box-fig-6

Selected location, Impact Drill drilling hole on the wall and ground according to size to expansion tube
Inset expansion tube.
Fix the hole in the box on the wall
Screw in the expansion tube