arlo Baby Monitoring Camera Instruction Manual
- June 7, 2024
- Arlo
Table of Contents
arlo Baby Monitoring Camera
What’s in the box
Get the Arlo app
Download the free Arlo app to get started.
The app guides you through installation.
Use the wall mount
You can place Arlo Baby on a flat surface or mount it on a wall.
- Place the wall plate.
- Secure the wall plate with the included screws.
- Align the holes on the base of your camera with the wall plate.
- Rotate the camera until the base snaps into place.
Tilt and swivel
Position your camera so that it captures the area that you want to monitor.
Start streaming
Your Arlo Baby camera is set up and ready to go. To view useful tutorial
videos, find troubleshooting tips, or get support, visit
support.arlo.com.
Add Arlo Baby to the Apple Home app
-
Locate your HomeKit code.
The code is on the back cover of this guide and on the Arlo Baby camera label on the bottom of your camera.
-
Launch the Apple Home app.
-
Tap the plus sign at the top of the page on the Home tab and then tap Add Accessory.
Your Apple mobile device’s camera launches and you are prompted to scan or enter the HomeKit code. -
Scan the HomeKit code using your mobile device’s camera. If you have trouble scanning the code, tap Don’t Have a Code or Can’t Scan? and then type the code.
-
After your camera is added, do the following to complete the setup process:
• Rename your camera.
• Assign your camera to a room within HomeKit or create a new room to place it in.
• Add your camera to your Favorites. -
Tap Done on the top right.
For live video, tap the Arlo Baby screenshot. To start using two-way audio,
tap the microphone icon on the bottom right.
Use of the Works with Apple HomeKit logo means that an electronic accessory
was designed to connect specifically to iPod touch, iPhone, or iPad,
respectively, and is certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
Arlo Baby features
• Rechargeable battery
Your Arlo Baby camera includes a built-in rechargeable battery and can work for several hours at a time without being plugged in. You can place the camera in locations where you cannot connect it to a power outlet.
Use the switch on the bottom of the camera to power the Arlo Baby camera’s battery off. The camera’s battery is on when the green color is visible.
If the camera is unplugged and you don’t want the battery to lose its charge, set the switch off.
• Night light
Use the app or the top button on the right side of the camera to turn the
night light on and off.
• Music
Use the app or the bottom button on the right side of the camera to play and
pause music.
• Local streaming
Enjoy minimal video lag by connecting your mobile device to the same WiFi
network (SSID) as the one Arlo Baby is connected to.
©2018 Arlo Technologies, Inc. Arlo, Arlo logo, and Every Angle Covered are trademarks of Arlo Technologies, Inc. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc. Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates. Other trademarks are for reference purposes only.
If this product is sold in Canada, you can access this document in Canadian French at arlo.com/docs.
For regulatory compliance information including the EU Declaration of Conformity, visit www.arlo.com/about/regulatory/.
Arlo Technologies Intl. Ltd
Ground Floor, Building 3
University Technology Centre
Curraheen Road, Cork T12 EF21 Ireland
May 2019
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>