V-TAC VT-1577 LED Tubes Instruction Manual
- June 15, 2024
- V TAC
Table of Contents
Meaningful innovation
WEEE Number : 80133970
INSTRUCTION MANUAL
T8 LED TUBES
STARTER
FOR LED TUBES DUMMY STARTER INCLUDED
TECHNICAL DATA
MODEL | VT-6072 | VT-9077 | VT-1277 | VT-1577 |
---|---|---|---|---|
SKU | 216392,216393,216394 | 216262,216272 | 216263,216273,216264 |
216265,216309,216310
WATTS| 9W| 14W| 18W| 20W
LUMENS| 850LM©Sphere 360| 1400LM©Sphere 360| 1850LM©Sphere 360| 2100LM©Sphere
360
DF| >0.5| >0.7| >0.7| >0.7
CRI| >80| >80| >80| >80
BEAM ANGLE| 160°| 160°| 160°| 160°
BODY TYPE| Plastic| Plastic| Plastic| Plastic
PROTECTION RATING| IP20| IP20| IP20| IP20
HOLDER| G13| G13| G13| G13
ON/OFF CYCLE| >15,000| >15,000| >15,000| >15,000
LONG LIFE| 25,000 Hours| 25,000 Hours| 25,000 Hours| 25,000 Hours
DIMENSION| 28x600mm| 28x900mm| 28x1200mm| 28x1500mm
INPUT POWER| AC: 220-240V,50Hz| AC: 220-240V,50Hz| AC: 220-240V,50Hz| AC:
220-240V,50Hz
| This marking indicates that this product should not be disposed of with
other household wastes.
---|---
| LED Lamps suitable for 50Hz operation
| LED Lamps to be used in dry conditions or in a luminaire that provides
protection
| LED replacement starter (Included in the packaging)
| Caution, risk of electric shock.
| LED Tubes are NOT suitable for dimming
| LED Tubes not suitable for emergency operations
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
INSTALLATION INSTRUCTION
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the
best. Please read these instructions carefully before starting the installing
and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased
the product. They are trained and ready to serve you at the best. The warranty
is valid for 3 years from the date of purchase. The warranty does not apply to
damage caused by incorrect installation or abnormal wear and tear. The company
gives no warranty against damage to any surface due to incorrect removal and
installation of the product. The products are suitable for 10-12 Hours Daily
operation. Usage of product for 24 Hours a day would void the warranty. This
product is warranted for manufacturing defects only. The LED tube can be used
in hotels, offices, factories, conference rooms, meeting rooms, commercial
complexes, residential buildings, schools, colleges, universities, hospitals,
etc.
WARNINGS!
- Installation should only be done by a certified electrician
- Operation environment temperature: from -20°C to +45°C
- Do not use DC electricity
- Do not modify the fitting to be used with the LED Tube.
- V-TAC LED Tubes are NOT designed to be used in emergency operations.
- For Indoor use only.
- Do NOT use with electronic ballasts. V-TAC LED tubes are not compatible with electronic ballast circuit. In order to use the electronic ballast fitting you must ensure to remove the electronic ballast from the fitting and rewire the circuit as per new fitting installation as shown below. Ensure the installation and wiring is carried out by certified electrician.
PACKING:
- LED Tube (1PC)
- Instruction Manual (1PC)
- Dummy Starter (1PC)
New Fitting Installation
- Installation should only be done by a certified electrician
- Switch O£ the power.
- Ensure the wiring diagram is followed as highlighted.
- Insert V-TAC LED Tube.
- Switch On the power to test the light.
Installation & Replacement of Fluorescent Lamp(Single Magnetic Ballast Ciruit)
- Installation should only be done by a certified electrician.
- Please refer to the wiring diagram for replacing fluorescent tube on a single magnetic ballast circuit with V-TAC LED Tube.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>