Homedepot 1-Light Blue and Polished Nickel Pendant User Manual
- June 4, 2024
- HOMEDEPOT
Table of Contents
Homedepot 1-Light Blue and Polished Nickel Pendant
Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions.
Save these instructions
IMPORTANT SAFETY INSTRUCTIONS
- CAUTION: TURN OFF THE MAIN POWER AT THE CIRCUIT BREAKER BEFORE INSTALLING THE FIXTURE, IN ORDER TO PREVENT POSSIBLE SHOCK.
- CAUTION: If you feel you do not have enough electrical wiring experience contact a qualified licensed electrician for the installation of your lighting fixture.
- These instructions are provided for your safety. Please read carefully and completely before beginning the assembly and installation of this lighting fixture.
- Do not use the electric cord only (without steel/reinforced cable) to support the weight of the lighting fixture.
- This lighting fixture is intended for indoor use only and in dry locations.
- This lighting fixture is intended for ceiling mount only and is connected only to a 3-wire, single-phase electrical supply system with proper Ground wire or system.
- For use with E26 (medium) base light bulbs only.
- To avoid the risk of fire, do not exceed the maximum wattage of a 60W incandescent bulb , 9W LED bulb , 13W fluorescent (CFL) bulb , or a 9W self-ballasted LED bulb. (Bulbs not included)
WARNINGS
- To reduce the risk of fire, electrical shock, or personal injury: always turn off this lighting fixture and allow it to cool before attempting to replace the light bulb.
- Do not touch the light bulb while the fixture is turned on.
- Keep flammable materials away from this lighting fixture.
- Never look directly at a lit bulb.
CARE INSTRUCTIONS
- Turn the light off and allow the bulb to cool before cleaning.
- Carefully wipe clean with a soft, dry cloth or static duster.
- Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fixture’s finish
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
- Feed wires through the mounting plate (A).
- Securely connect wires as shown using wire connectors.
- Secure mounting plate to the ceiling using screws.
- Determine the desired length of the lamp cord, and secure the length using a small screw and screwdriver.
- Carefully install the lampshade as shown.
- Carefully install the specified light bulb according to maximum wattage recommendations. (light bulb not included)
For use with light bulbs with an E26 (medium) base. DO NOT EXCEED THE SPECIFIED WATTAGE.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>