imperii 2.4G Drone Instruction Manual

imperii 2.4G Drone Instruction Manual

2.4GHz VERSION CONTROLLER

WIFI VERSION CONTROLLER (THE PHONE IS NOT INCLUDED)

2.4GHz REMOTE CONTROL

Remote Control

1. Strapless pressure given high remote control button Features:
   Do not disassemble.
   

2. High pressure set with the remote control buttons Features:
   

TRANSMITTER BATTERY INSTALLATION

1. Step 1
   
   Use a screwdriver to press against the clock to unscrew the screw Siding.

2. Step 2
   
   Slide the battery lid to open by following the arrow.

3. Step 3
   
   Transmitter
   
   Battery lid
   Please use 4 AA sized batteries, installed based on polarity indicated case. Do not mix batteries of different chemistry/spec.

Aircraft stand and protective ring installation steps:

1. 
   The tripod according to Figure (1) loaded into the body.

2. 
   The protective frame according to Figure (2) loaded into the body.

3. 
   The screw press shown in (3) clockwise to tighten.

With a real-time transmission aerial component installation:
(WIFI transmission version, FPV Illustrated Edition)

1. 
   Place the retaining clip on the remote control for aligning the antenna is inserted and aligned with the screw holes behind the screws.

2. 
   Firmly press the retaining clips spring at resizable.

3. 
   The spiral twist locked out, pull up firmly hold the retaining clips, retaining clips can disassemble the phone.

With camera installation steps and functions:

installation steps:

1. 
   Figure 1
   Figure (1) shows the camera live within pushdown place,

2. 
   Figure 2
   Figure (2) shows the camera cable into the corresponding slot of the fuselage.
   NOTE: After opening the ban aircraft power plug or unplug the camera connector plug on the plane!

3. 
   Figure 1
   Wifi camera installation as shown in (3) below.

Aerial features

Methods Are:
The cable plugs into the camera aircraft specified socket; Aircraft power, the camera head long bright blue light, indicating work normally; when the red light has been flashing, indicating that the camera does not insert a memory card (SD card).

Camera, Video Features:
Camera features: when the camera is in the positive working state, press the “camera” button on the camera’s red light flashed, showing pictures complete.
Video features: when the camera is working normally, press the “record” button on the camera’s red light has been long bright, said it is recording, press again, the red light turned blue, indicating that the video ends.

LCD panel with FPV Illustrated description:

The cable plugs directly into the LCD panel specifies the jack on the remote control.

The top of the screen icon

1. The signal strength indicator, 1-4 grid.
2. Indicates that a memory card,display screen end there TFSD card white accord, no TF card is not displayed.
3. Memory card indication 2, the camera displays a green SD card TF end have met, no TF card is not displayed.
4. Take a picture directed by camera SNAP button will display a red “JPG”status symbol pictures.
5. Indicates that the camers, press the REC button camera will display a red “REC” symbol indicates the recording state.

The bottom of the screen inon(representing the corresponding function key)

VIEW: Play back photo r videos

|

DEL
PLAY
BACK
DOWN
UP

|

BACK
PRE
NEXT

|

Valid at the time of the display end into TF card

---|---|---|---

REC: Camera

| | |

Effective at the camera end into TF card

SNAP:   Photograph

| |

DOWN: Brightness decreases

| |

UP: Increase brightness

| |

FEATURES:

Low voltage protection:
When the four lights on the aircraft begin flashing, indicating the aircraft power is low, the aircraft will automatically land.

Overcurrent protection:
When the aircraft rotating blades in the state, by the collision or jammed, the aircraft circuit overcurrent protection.

Level correction function:
The vehicle is placed on a horizontal plane around the remote control while at the same time push rod is pushed to the bottom right corner after about 2-3 seconds, indicator light is shining on the aircraft turned quickly, another 2-3 seconds and then become regular bright state, indicating a successful calibration.

When the basic action you can play some very skilled tumbling thrilling action, the four-axis aircraft flew more than 3 m height, press and hold the top right corner of the remote control buttons (rollover button) while the right operating lever forward/back/ left/right push to the highest point, the aircraft can achieve forward / back/ left/ right scroll function.

Step and use Android (Android) mobile phone software WiFi connection.

Download and install software
Foreign users search on Google Play LS-Model download and install, or scan two-dimensional code (Fig. 2 ) to download and install.
360 mobile phone users to search domestic helper LS-Model download and install, or two-dimensional code scanning (Fig. 3) to download and install.

IOS APP

GooglePlay APP

Android APP

WiFi connection Description

1. Connect the vehicle power supply.
2. Go to Android phone settings option WiFi Open, locate the device name in the Wi-Fi option and WiFi connection.
3. Open the software LS-Model, click on the icon to operate.
4. Specific instructions refer to the iPhone operating instructions.

Start Interface

Fly throwing motion instructions:
Aircraft with six-axis gyro, playability stronger. The aircraft turned out to throw up while pushing the throttle or push rod, the aircraft can be smooth blanket the sky.

Headless features:

1. When headless button up on time, or enter the headless mode, no need to identify the aircraft controller’s head position, just under the direction of the remote control lever to control the aircraft.
2. When the headless button down on time, that is, into the normal mode.
   

WI-Fl operating functions

Wi-Fi to connect your phone to control operation

Step and use the Apple system (IOS) mobile phone software WiFi connection.

1. Download and install software
   Users go to the Apple Store (APP Store) search for LS-Mode I, download and install. Or two-dimensional code direct scanning to download and install.

WiFi connection Description

1. Connect the vehicle power supply.
2. Go to the iPhone or iPad setup options, the option to find WiFi device Wi-Fi name and connection, a “hook” to indicate successful connection, after the completion of the setup options.
3. In the iPhone or iPad to open soft LS-Mode I, click on the icon to enter the control interface.(As far away from other WiFi signal source environment flight).

Control Interface Description

Help

1. Return

2. Take Photo

3. Record Video

4. Photo & Video Playback

5. Speed: Slow 30%
   Quick 60%
   High 100%

6. High limit

7. Gravity sensor mode

8. Show/Hide control interface

9. Camera flip

10. Through control

11. Left/Right roll

12. Left/Right roll

13. Direction Control left/right/forward/backward

14. Direction Control left/right/forward/backward

15. Direction Control left/right/forward/backward

16. Direction Control left/right/forward/backward

17. Forward/backward fine-tune

18. Forward/backward fine-tune

19. Left/right roll fine-tune

20. Left/right roll fine-tune

21. Left/right fine-tune

22. Left/right fine-tune

Aircraft control Illustration:

Operating direction

1. UP and Down

When the left lever (throttle) up or down to increase or decrease the corresponding aircraft.

2. Forward and Backward
   
   When the right lever (steering rudder) up or down to the appropriate vehicle forward or backwards.

3. Left rotation Right rotation
   
   When the left lever (throttle) to the left or right, push the corresponding Rotate Left or Rotate Right aircraft.

4. Left traverse Right traverse
   
   When the right lever (steering rudder) to the left or right push, aircraft fly corresponding to the left or to the right to fly.

Fine-Tuning Operations:

1. Forward, backward Spinner
   
   In the case of hovering aircraft, the aircraft flight appear automatically forward or backward, up or down correspondingly corrected press the spin button.

2. Left/right side fly Spinner

In the case of hovering aircraft, the aircraft automatically appear to the left or to the right flight, you can press the corresponding right or left button to fine-tune the correction.

Aircraft ready to fly
No pressure given high aircraft ready to fly.

1. step one: the battery cover broke outside, then the battery cable connector with power connector.
   

2. Step two: turn on the switch at the bottom of the aircraft.
   

3. Step three: Open the remote control power switch.
   

4. Step four: When the indicator or the aircraft by the flash become slow flash, will push the throttle pushrod to the highest point and then reset to the lowest point where the aircraft ready to fly in the state.
   

With the pressure given high aircraft ready to fly.

The above four steps to increase Step five: the remote control at the same time to the two rocker toe, started the aircraft, To stop the flight, the throttle is pushed down, as shown:

Aircraft battery replacement and charging

1. The aircraft switch to “OFF”, withhold the battery cover back breaking.
   

2. Unplug the battery cable from the power supply interface.

3. After the battery power cord and USB docking, and then connected to a computer USB port (charging lights, when full lights off).
   

4. Replace the battery after the battery cover back buckle.
   

Note the following charge:

1. Do not heat the charged battery in hot places such as an open flame or electric devices, otherwise damaged or explode.
2. Do not immerse the battery should be stored in a dry place.
3. Never disassemble the battery.
4. Do not leave the charging officer.

Maintenance program

Problem

|

The Reason

|

Solution

---|---|---

The aircraft did not respond

|

1. Aircraft into the low pressure protection.
2. Remote control power is low, the power light flashes.
3. The remote control of channel selection and aircraft of the code is inconsistent.

|

1. Vehicle charging.
2. Replace the remote control batteries.
3. Adjust the channel remote control aircraft, lo make it consistent.

Aircraft flight reaction insensitive

|

1. Shake air is running low.
2. Have the same frequency of the remote control transmitter interference.

|

1. Replace Battery.
2. For a launching not have the same frequency Interference.

Hover fly side to side

|

There is no level of calibration.

|

Re-Level calibration, see Application III (Horizontal correction function.)

Under headless state in front of bias.

|

Multiple collisions cause head tilt.

|

Before re-define the direction, see Features sixth (headless function).

Exploded View

Number

|

Part Name

|

Quantity

---|---|---

1

| Top body| 1

2

|

Below body

|

1

3

|

Forward main fan

|

2

4

|

Reverse main blades

|

2

5

|

Protecting mask

|

4

6

|

Battery cover

|

1

7

|

Forward main motor

|

2

8

|

Reverse main motor

|

2

9

|

Circuit board

|

1

10

|

Lampshade

|

4

11

|

Light

|

4

12| Battery|

1

13

|

Gear

|

4

14

|

WIFI Webcam

|

1

15

|

Tripod

|

4

Table Accessories

1. 01A Body (White)
   

2. 01B Body (black)
   

3. 02A Forward fan (black/ white)
   

4. 02B Reverse fan (black/white)
   

5. 03A Tripod (White)
   

6. 03B Tripod (black)
   

7. 04 Protective frame
   

8. 05 lampshade
   

9. 06 Motor A
   

10. 07 Motor B
    

11. 08 Light
    

12. 09 Receiver
    

13. 10 Battery
    

14. 11 USB cable
    

15. 12 WIFI Webcam (white)
    

16. 13 WIFI Camera (Black)
    

17. 14 Battery
    

imperii 2.4G Drone Instruction Manual – Download [optimized]
imperii 2.4G Drone Instruction Manual – Download
imperii 2.4G Drone Instruction Manual – OCR PDF

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>