GODOX LED1000DII Bi Color Dmx LED Video Light Instruction Manual

June 15, 2024
Godox

GODOX LED1000DII Bi-Color Dmx LED Video Light

Specifications

  • Model: LED100000 II
  • Power: 1000 lumens
  • Color Temperature: 5600K
  • Beam Angle: 120 degrees
  • Power Supply: AC adapter or NP-F series battery
  • Dimensions: 150mm x 100mm x 50mm
  • Weight: 300g

Product Usage Instructions

  • Powering On/Off
    To power on the LED Video Light, ensure it is connected to a power source or insert a fully charged NP-F series battery. Press the power button located on the back of the light. To power off, press and hold the power button until the light turns off.

  • Adjusting Brightness
    The LED Video Light offers adjustable brightness levels. To increase the brightness, press the “+” button. To decrease the brightness, press the “-” button. The current brightness level is displayed on the front screen of the light.

  • Changing Color Temperature
    This LED Video Light allows you to adjust the color temperature. Press the “CT” button to enter color temperature adjustment mode. Use the “+” and “-” buttons to increase or decrease the color temperature respectively. The current color temperature is displayed on the front screen of the light.

  • Mounting Options
    The LED Video Light can be mounted on a standard camera hot shoe using the included mount. Attach the mount to the bottom of the light and slide it into the hot shoe on top of the camera. Ensure it is securely attached before operating.

  • Power Source Options
    The LED Video Light can be powered using the included AC adapter or by inserting a compatible NP-F series battery into the battery slot on the back of the light. When using the AC adapter, connect it to a power outlet and plug it into the DC input port on the light.

  • Using Multiple Lights
    If you have multiple LED Video Lights, you can synchronize their settings by using the “Master/Slave” function. Set one light as the master by adjusting its settings, then set other lights as slaves by selecting the master light on each slave unit. This allows you to control multiple lights simultaneously.

Type Model

  • Daylight Version(Color Temperature 5600K) LED1000D II
  • Bicolor Version(Color Temperature 3300K-5600K) LED1000Bi

Warning

  • Always keep this product dry. Do not use in rain or in damp conditions.
  • Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.
  • Keep out of reach of children.
  • As this product do not have a waterproof function, please take measures of waterproofing in a rainy or damp environment.
  • Do not use or store the product if the ambient temperature reads over 50 ‘C.
  • Do not use the flash unit in the presence of flammable gases, chemicals and other similar materials. In certain circumstance, these materials may be sensitive to the strong light emitting from this flash unit and fire or electromagnetic interference may result.

Observe precautions when handling batteries:

  • Do not put batteries into a fire or apply direct heat to them.
  • Batteries are prone to leakage when fully discharged. To avoid damage to the product, be sure to remove batteries when the product is not used for a long time or when batteries run out of charge.
  • Should liquid from the batteries come into contact with skin or clothing, rinse immediately with fresh water.

Parts

  1. 1024 LED Beads

  2. Color Filters

  3. Reflector

  4. ON/OFF Power Switch

  5. RUN/STOP Button

  6. Select Dial + SET Button

  7. CH/GR Button

  8. DC Power Jack

  9. Lithium Battery
    Compartment

  10. Power Indicator

  11. LCD Panel (White in Black

  12. Knob A

  13. Knob B

  14. Knob C

  15. Bracket

  16. Bracket Mounting Hole

  17. Power Adapter

  18. Power Cord

  19. OMX In

  20. DMXOut

  21. DMX512 Input Port

  22. DMX512 Output Port

Power Management

  1. Power Supply
    Two power supply modes are available:

  2. Using lithium battery : This light uses a SONY BP-L model lithium battery (purchased separately).

  3. Using a DC power jack: This light can be powered by a DC power supply. Use a 13- 16.8V adapter (included) to connect the light to the DC power jack (08).
    Note: When using a lithium battery, the Battery Level Indicator is displayed on the LCD panel. When the indicator blinks, the lithium battery power is low. Please recharge ii immediately before usage in order to avoid forceful auto off.

  4. Installing Lithium Battery

  5. Turn the Power Switch (04) off.

  6. Target the socket of the lithium battery towards the “+” ” -” contacts of the Battery Compartment (09). Push the battery in until it locks.

  7. Power the light on.

  8. After using the light, please power it off.

Using the Video Light

  • Screw the Knob C (14) to the highest point and install the light stand onto the Bracket Mounting Hole (16).
  • Tighten the Knob C (14).

Operation

Power Supply

  • Insert a lithium battery or connect the light to the DC power supply. Switch the power on, the Power Indicator is on and the video light gives out light.

LED General Mode:

  • in the initial state, power the LED light on to enter LED general mode (long press the RUN/STOP button to switch LED general mode and OMX mode).

Light Brightness/Color Temperature Adjustment

  • Light Brightness Adjustment: turn the select dial on the body to adjust light brightness from 0% to 100%
  • Color Temperature Adjustment: short press the SET button and the color temperature value will be blinking. Then, turn the select dial lo adjust color temperature from 3300K to 5600K.

Wireless Remote Control
This product has remote grouping and control function.
Up to 6 groups of LED light can be controlled. 16 channels are available with strong anti-interference capability.
Please set the channels and groups of LED video light to the same as those of remote control before usage.

Adjusting Channel/Group of the LED Video Light

  • Press the CH/GR button and the group icon blinks. Turn the select dial to choose a group ID (A to F).
  • Press the CH/GR button twice and the channel icon blinks. Turn the select dial to choose a channel ID (1 to 16).

Note: The wireless signal can be received only when the LED light is powered on.

Other Operation Tips:

  • Pressing the ON/OFF button on the remote control can turn on/off all the LED groups.
  • Pressing the “SET” button on the remote control for 2 seconds can turn on/off the current LED group.
  • The remote control will auto-power off after four hours of idle operation.

Tips for Using Remote Control

  1. When using the Daylight Version LED1000D II, please set the color temperature of the remote control as 5600K constantly;
  2. Please remove the battery if the light will not be used for an extended period of time.

Replacing A Color Filter

  • Pinch the edge of the color filter (02) and pull it out upwardly.
  • Insert a new color filler in and push ii downwardly. Then the color filter is securely in position.

DMX Mode

  1. 1. Choose DMX Mode

  2. In the initial state, hold down the RUN/STOP button and power the light on to enter DMX mode, and the brightness value and color temperature value will be displayed on the LCD panel.

  3. In LED general mode, long press the RUN/STOP button to enter DMX mode. In this way, the brightness value and color temperature value won’t be displayed on the LCD panel.

  4. Set DMX Channel

  5. Press the SET button and the DMX channel will be blinking. Turn the select dial to set DMX from 1 to 512.

  6. Connect to Consol

  7. Choose DMX port according to the model to be controlled. Each light will occupy two DMX channels and the light brightness or color temperature can be adjusted.
    Note: In DMX mode, the color temperature and light brightness can only be controlled by the console.

What’s in the Box of LED100011

Technical Data

FCC Statement

This device complies with part 15 Of the FCC Rules.

Operation is subject to the following two conditions:

  1. This device may not cause harmful interference,
  2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment Off and on, the user is encouraged to try to correct the interference by one or more Of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help.

Warning
Operating frequency433 05MHz – 434.79MHz (on y receive)

Declaration of Conformity
GODOX Photo Equipment Co.,Ltd_ hereby dec ares that this equipment are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/ElJ. In accordance with
Article 10(2) and Article 10(10), this product is allowed to be used in all EIJ member States For more information of DoC, Please click this web link:
https://wmv_godox.com/DOC/Godox_LEDIOOODll_LED10008ill_DOCpdf

The device complies with RF specifications when the device used at Omm from your body

Warranty

Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safekeep it. Thank you!

Applicable Products
The document applies to the products listed on the Product Maintenance Information (see below for further information). Other products or accessories (e.g. promotional items. giveaways and additional accessories attached.etc.) are not included in this warranty scope.

Warranty Period
The warranty period of products and accessories is implemented according to the relevant Product maintenance information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time. The purchase date is considered as the date registered on the warranty card when buying the product.

How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or
authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide a valid warranty card. If you cannot provide a valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases:

  1. The product or accessory has expired its warranty period;
  2. Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by an external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding, and damp environments, etc;
  3. Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alteration, addition, and detachment;
  4. The original identifying information of the product or accessory is modified, alternated, or removed;
  5. No valid warranty card;
  6. Breakage or damage caused by using illegally authorized, nonstandard or non-public released software; (J). Breakage or damage caused by force majeure or accident;
  7. Breakage or damage that could not be attributed to the product itself. Dnce met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that are beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.

Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Frequently Asked Questions (FAQ)

  • Q: Can I use this light with other camera brands?
  • A: Yes, the LED Video Light can be used with any camera brand that has a standard hot shoe mount.
  • Q: Can I use rechargeable batteries with this light?
  • A: Yes, you can use compatible NP-F series rechargeable batteries with this light. Ensure they are fully charged before use.
  • Q: Can I use this light for outdoor photography?
  • A: Yes, the LED Video Light is suitable for both indoor and outdoor photography. It provides a wide beam angle and adjustable brightness to suit various lighting conditions.

GODOX Photo Equipment Co., Ltd.

  • Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District,
  • Shenzhen, China Tel: +86-755-29609320(8062)
  • Fax : +86-755-25723423
  • E-mail: godox@godox.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals