SWIPESMITHE ELG10 Corded Electric Snow Thrower User Manual

USER’S MANUAL
CORDED ELECTRIC SNOW THROWER

WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Save this instructions in a safe place and on hand so that they can be read when required.

DESCRIPTION

∎ PURPOSE
This machine is used to remove and clear away snow from pavements, gardens, driveways and other ground level surfaces.

∎ OVERVIEW

1. Handle bar
2. Start lever
3. Upper handle
4. Middle handle
5. Chute control rod
6. Lower handle
7. Scraper| 8. Impeller
9. LED light
10. Discharge chute
11. Chute deflector
12. Safety switch button
13. Cord retainer
---|---

INTRODUCTION

Your product has been engineered and manufactured to high standards for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.

∎ INTENDED USE
This product has been designed and built to remove and clear away snow from pavements, gardens, driveways and other ground-level surfaces.

IMPROPER USE
Any other usage not in keeping with the above mentioned ones may be hazardous and harm persons and/or damage things. Examples of improper use may include, but are not limited to:

• Use of the product on surfaces above ground level, such as roofs on houses, garages, porticoes or other structures or buildings,
• Activate the auger in the presence of materials other than snow (e.g. soil, grass, pebbles, etc.),
• Pulling or pushing loads,
• Do not carry passengers.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool.

∎ TRAINING

• Do not allow children under the age of 14 to operate this tool. Children who are 14 years of age or older must read and understand the operating instructions and safety rules in this manual and must be trained and supervised by a parent.
• Read the operating and service instruction manual carefully. Be thoroughly familiar with the controls and the proper use of the appliance. Know how to stop the unit and disengage the controls quickly.
• Never allow children to operate the appliance. Never allow adults to operate the appliance without proper instruction.
• Keep the area of operation clear of all persons, particularly small children, and pets.
• Exercise caution to avoid slipping or falling, especially when operating in reverse.
• Do not use on graveled surfaces.
• Dress Properly – Do not wear loose clothing or jewelry. They can be caught in moving parts.
• Wear rubber boots when operating the appliance.
• Operation of the appliance in the hand-held position is unsafe, except in accordance with the special instructions for such use provided in the operator’s manual.

∎ PREPARATION

• Thoroughly inspect the area where the appliance is to be used and remove all doormats, sleds, boards, wires, and other foreign objects.
• Do not operate the appliance without wearing adequate winter garments. Wear footwear, which will improve footing on slippery surfaces.
• Adjust the housing height to clear gravel or crushed rock surface.
• Never attempt to make any adjustments while the appliance is running (except where specifically recommended by manufacturer).
• Always wear safety glasses or eye shields during operation or while performing an adjustment or repair to protect eyes from foreign objects that may be thrown from the appliance.
• Prevent unintentional starting. Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents.

∎ PREPARATION

• Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.
• Exercise extreme caution when operating on or crossing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic.
• After striking a foreign object, stop the engine, remove the wire from the spark-plug, thoroughly inspect the power tool for any damage, and repair the damage before restarting and operating the power tool.
• If the power tool should start to vibrate abnormally, stop the engine and check immediately for the cause. Vibration is generally a warning of trouble.
• Stop the engine whenever you leave the operating position, before unclogging the collector/impeller housing or discharge guide, and when making any repairs, adjustments, or inspections.
• When cleaning, repairing, or inspecting, make certain the collec-tor/impeller and all moving parts have stopped.
• Disconnect the spark-plug wire, and keep the wire away from the plug to prevent accidental starting. Discon-nect the cable on electric motors.
• Do not clear snow across the face of slopes. Exercise extreme caution when changing direction on slopes. Do not attempt to clear steep slopes.
• Never operate the power tool without proper guards, plates or other safety protective devices in place.
• Never operate the power tool near glass enclosures, automobiles, window wells, drop-offs, etc., without proper adjustment of the snow discharge angle. Keep children and pets away.
• Do not overload the power tool capacity by attempting to clear snow at too fast a rate.
• Never operate the power tool at high transport speeds on slippery surfaces. Use care when reversing.
• Never direct discharge at bystanders or allow anyone in front of the power tool.
• Disengage power to the colletor/im-peller when the power tool is transported or not in use.
• Use only attachments and accesso-ries approved by the manufacturer of the power tool.
• Never operate the power tool without good visibility or light. Always be sure of your footing, and keep a firm hold on the handles.
• Walk, never run.
• Use the power tool only in daylight or good artificial light.
• Take all possible precautions when leaving the power tool unattended. Disengage the power takeoff, lower the attachments, shift into neutral, set the parking brake, stop the engine and remove the key.

∎ MAINTENANCE

• Check shear bolts; engine-mounted bolt, etc., at frequent intervals for proper tightness to be sure the appliance is in safe working condi-tion.
• Always refer to owner’s guide instructions for important details if the appliance is to be stored for an extended period.
• Store Idle appliances Indoors-When not in use, the appliances should be stored indoors in a dry, locked-up place – out of reach of children.
• Check shear bolts and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.
• Run the appliance a few minutes after throwing snow to prevent freeze-up of the collector/impeller.
• Do not expose appliance to fire or excessive temperature space. Exposure to fire or temperature above 265°F (130°C) may cause explosion.
• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the prod-uct is maintained.
• Do not modify or attempt to repair the appliance except as indicated in the instructions for use and care.
• Maintain appliance with care -follow instructions for changing accessories.
• Maintain or replace safety and instructions labels, as necessary.

SYMBOLS ON THE PRODUCT

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.

follow all warnings and safety instructions.
| Thrown objects can ricochet and result in personal injury or property damage. Wear protective clothing and boots.
| Keep feet away from openings while the product is running.
| Keep hands away from the discharge area.
| Stop the motor and unplug the product before leaving the product.
| Wear eye and ear protection.
| Do not use a damaged power cord.

RISK LEVELS

The signal words and meanings show the levels of risk related with this machine.

prevent, can cause death or dangerous injury.
| WARNING:| shows a possibly dangerous situation, which, if you do not prevent, can cause death or dangerous injury.
| CAUTION:| shows a possibly dangerous situation, which, if you do not prevent, can cause mitigated or moderate injury.
| CAUTION:| (Without Safety Alert Symbol) shows a situation that can cause property damage.

RECYCLE

| Separate collection. This product must not be disposed of with normal household waste. Should you find one day that your product needs replacement, or if it is no further use to you, do not dispose of it with household waste. Make this product available for separate collection.
---|---
| Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.

INSTALLATION

WARNING
Do not change or make accessories that are not recommended by the manufacturer.

WARNING
Do not connect to power supply until you assemble all the parts.

∎ UNPACK THE MACHINE

WARNING
Make sure that you correctly assemble the machine before use.

WARNING

• If the parts are damaged, do not use the machine.
• If you do not have all the parts, do not operate the machine.
• If the parts are damaged or missing, speak to the service center.

1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local regulations.

∎ INSTALL THE MIDDLE HANDLE

1. Align the holes in the middle handle (4) and the lower handle (6).
2. Put the bolts (21) through the middle handle (4) and the lower handle (6).
3. Tighten the handle knob (14) onto the bolt (21).
4. Repeat for left/right side.

∎ INSTALL THE UPPER HANDLE

1. Put the cord retainer between the upper handle (3) and middle handle (4).

2. Align the holes in the middle handle (4) and the upper handle (3).

3. Put the bolts (21) through the holes.
   Tighten the handle knobs (14) onto the bolts (21).

4. Do the same operation on the other side.

5. Attach the cable clamp (22) to the middle handle (4).

∎ INSTALL THE CHUTE CONTROL ROD

1. Connect the upper lever (15) and lower lever (16) with 1 screw supplied (17).
2. Unscrew the nut (18) and washers(22).
3. Put the bolt of the upper lever (15) through the hole in the middle handle. And install the washers (22) and nut (18).
4. Pull out of the hitch pin (20). And then put the end of the chute control rod (5) straight through the hole (19) in the bracket. And Keep the grip handle (23) down.
5. Put the hitch pin (20) through the chute control rod (5) and hole (19).
6. Turn the grip handle (23) left and right to make sure that the discharge chute (10) moves in the same direction.

OPERATION

WARNING
Wear eye protection during operation.

∎ USE THE CORD RETAINER

NOTE
Do not plug the extension cable into the outlet until it has been connected to the cord retainer and plugged into the machine.

1. Fold the extension cable to form a tight loop near the retainer.
2. Push the loop through the bottom hole in the retainer.
3. Move the loop over the retaining clip, and pull until the cable is secured.

∎ START THE MACHINE

1. While holding the safety switch button (12), pull the start lever (2) to start the machine.
2. Once the machine powers on, release the safety switch button (12) and begin operation.
3. The machine can only be started by pressing the safety switch button (12) first, followed by squeezing the start lever (2), reverse operation will not start the machine.

NOTE
Lower the scraper to the ground to remove the snow.
WARNING
Keep bystanders a safe distance from the machine.
WARNING
Examine the work area. Remove all stones, sticks, wire, bones, and other debris that can ricochet because of the rotating impeller.

∎ STOP THE MACHINE

1. Release the start lever (2) to stop the machine.

WARNING
Wait until the impeller fully stops before you start the machine again. Do not quickly turn the machine off and on.
WARNING
Pull the plug after you complete the work.

∎ ADJUST THE DISCHARGE CHUTE

You can adjust the discharge chute 180° to change the snow direction.

1. Turn the grip handle (23) left to move the discharge chute (10) to the left.
2. Turn the grip handle (23) right to move the discharge chute (10) to the right.

∎ ADJUST THE CHUTE DEFLECTOR

You can adjust the chute deflector up and down to change the throwing distance of the snow.

WARNING
Release the bail lever before you adjust the chute deflector.

WARNING
Do not push the deflector so far forward that a gap shows between the deflector and the chute.

1. Loosen the locking knobs (14) and adjust the chute deflector (11) to a suitable height.
2. Move the chute deflector (11) up or down to selected comfortable angle.
3. Tighten the locking knob (14).

∎ OPERATION TIPS

• If it is possible, clear the snow with the direction of the wind.
• In strong winds, lower the chute deflector to direct the snow to the ground.
• When you complete the work, let the machine operate for a while to prevent ice formation in the discharge chute.
• If the snow is deeper than 8″, decrease the speed and let the machine work at its own rhythm.
• Do not use the scraper to remove compact snow and ice.

MAINTENANCE

WARNING
Disconnect the extension cord before maintenance.
CAUTION
Use only approved replacement parts.
CAUTION
Do not use strong solvents or detergents on the plastic housing or components.

∎ GENERAL MAINTENANCE

• Before each use, examine the machine for damaged, missing, or loose parts such as screws, nuts, bolts and caps.
• Tighten correctly all the fasteners and caps.
• Clean the remaining snow on the machine with a brush.

∎ REPLACE THE SCRAPER

WARNING
Use only approved replacement scrapers.
WARNING
Wear heavy gloves or wind cloth around the impeller when you touch the impeller.

1. Remove the 6 screws (21) .
2. Remove and discard the old scraper.
3. Install the new scraper.
4. Put in the screw (21) and scraper and tighten them.

∎ REPLACE THE IMPELLER

WARNING
Use only approved replacement scrapers.

1. Remove the 10 screws and side wear pads that secure the right and left side covers.
   |
   ---|---
2. Remove the belt, unscrew the nut and then remove the washer, large pulley and washer.
3. Unscrew the nut with flat washer and spring washer, remove the splint. Do the same operation on the other side.
4. Remove the bearing, impeller axle, washer and old impeller. And then remove the insert blocks from the old impeller to the new impeller.
5. Reinstall the new impeller, impeller axle, washer and bearing in order.
6. Reinstall the splint, nut with flat washer and spring washer.
7. Reinstall the washer, large pulley and washer. And screw the nut, reinstall the belt.
8. Reinstall the 10 screws and side wear pads that secure right and left side covers.

∎ STORE THE MACHINE

• Clean the machine before storage.
• Make sure the motor is not hot when you store the machine.
• Make sure that the machine does not have loose or damaged parts. If it is necessary, do these steps/ instructions:
  • Replace the damaged parts.
  • Tighten the bolts.
  • Speak to a person at an approved service center.
• Store the machine in a dry area.
• Make sure that children cannot come near the machine.

TROUBLESHOOTING

the height of the handle and make sure that the knobs and bolts are aligned correctly.
The machine does not start.| The switch is defective.| Have the switch replaced by an authorized service center.
The extension cord is not connected to the plug.| Connect the plug on the machine to the extension cord.
The extension cord is not connected to the power source.| Plug the extension cord into a live 120 V AC, 60 Hz outlet.
The engine is on, but the impeller does not turn.| The belt is damaged.| Replace the belt.
A thin layer of snow stays behind.| The scraper is damaged.| Replace the scraper.

• If you cannot find the solution to these problems, please go to the service center.

TECHNICAL DATA

content/uploads/2022/05/Screenshot_3-305.png)**

WARRANTY

MADE IN CHINA

Documents / Resources

| SWIPESMITHE ELG10 Corded Electric Snow Thrower [pdf] User Manual
ELG10 Corded Electric Snow Thrower, ELG10, Corded Electric Snow Thrower, Electric Snow Thrower, Snow Thrower, Thrower
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>