GENESIS Zircon 500 Gaming Mouse Installation Guide

GENESIS Zircon 500 Gaming Mouse

Product Information

The Zircon 500 is a gaming mouse designed and manufactured by Genesis Gaming. It is a versatile mouse that can be used in both wired and wireless modes. The mouse features a high DPI range of 100-10000, allowing for precise and accurate tracking. It supports multiple connectivity options including Bluetooth, 2.4 GHz, and USB. The mouse comes with a Nano receiver for wireless connectivity.

Specifications

• DPI Range: 100-10000
• Connectivity: Bluetooth, 2.4 GHz, USB
• Receiver: Nano

Wired Mode
The mouse will switch to wired mode automatically once you connect the USB cable to the mouse and computer.

Bluetooth Pairing
To pair a new device with the mouse in Bluetooth mode, follow the steps below:

1. Switch the mouse to Bluetooth mode by changing the channel to BT1 or BT2.
2. On your device, go to the Bluetooth settings and search for available devices.
3. Select the mouse from the list of available devices to pair it.

Battery Charging
To charge the battery of the wireless mouse, follow these steps:

1. Connect the USB cable to the mouse and a power source with a voltage of 5V and current of 0.5A.
2. The mouse will start charging, and the battery indicator will show the charging status.

FAQ

• Q: How do I switch between wired and wireless modes?
  A: To switch to wired mode, simply connect the USB cable to the mouse and computer. To switch to wireless mode, disconnect the USB cable.

• Q: How do I change the Bluetooth channel?
  A: To change the Bluetooth channel, use the channel switch on the mouse to select BT1 or BT2.

PRODUCT INFORMATION

PACKAGE CONTENT

REQUIREMENTS

• PC or compatible device with a USB port
• Windows® 7/8/10/11, Linux, Android

FEATURE

1. 5 programmable buttons
2. Mechanical switches with lifetime up to 60 million presses
3. Precise optical sensor with up to 10000 DPI
4. Advanced software with macro/profile editor
5. Built-in memory
6. Triple communication mode (Bluetooth | 2.4GHz | USB)
7. Nano receiver storage
8. Built-in rechargeable battery

INSTALLATION

• Connect the cable to a free USB port on your computer, it is necessary to wait about 15 seconds for the first connection until the drivers are fully installed.
• The mouse includes software that allows you to set up advanced features, if you want to use these features, you need to download and install the software from our website www.genesis-zone.com
• Open the installation folder and then double-click the setup.exe file.
• Follow the instruction to install the program.
• After a successful installation, the software icon appears on the main bottom panel. Double-clicking the icon opens the settings interface.

MODE

WIRED MODE
The mouse will switch to wired mode automatically once you connect USB cable to the mouse and computer.

Tips:

• Wired mode offers better smoothness performance of sensor than wireless mode, for best results set the polling rate to 1000 Hz.
• Wired mode allows simultaneous using of the mouse and charging the battery.

WIRELESS MODE

• Pairing a new device with mouse in Bluetooth mode
  • Move the switch located at the bottom of the mouse to BT position
  • Turn ON Bluetooth in device which you want to pair with the mouse
  • Use the button for changing the channel located on the bottom of the mouse, select the channel BT1 or BT2 and then hold down at same time the left button + scroll + right button for about 5 seconds to enter into pairing mode. The LED diode will start flashing rapidly
  • Then go to the Bluetooth settings on your device and select from the list of mouse Zircon 500
  • After successful pairing, the LED on the mouse will stop flashing
  • The mouse is ready for use
• Connecting the mouse with the previously paired device
  • Turn ON Bluetooth on your device that you have previously paired with the mouse
  • Switch the mouse into BT mode or wake it up from hibernation
  • The mouse will automatically connect with the device
• Connection of mouse via USB receiver
  • Turn ON your computer or other compatible device
  • Move the switch located on the bottom of the mouse to 2.4G position
  • Connect receiver to a free USB port on your computer
  • The operating system will automatically install the required drivers
  • The mouse is ready for use

Note:

• The device is equipped with intelligent technology for energy management. When the mouse enter into hibernation (sleep) mode, press any button of the mouse for its revival.
• The mouse is equipped with an ON/OFF switch to save the battery power when not in use for longer period.

Tips:

• To get the best performance of wireless connection and reduce latency, connect the USB receiver as close as possible to the mouse and make sure that there are no obstacles between the mouse and the receiver that can interfere with the wireless signal.
• In wireless mode set the polling rate to 500 Hz to get better smoothness performance of sensor.

DPI | BT MODE SWITCH

• Short press DPI|BT mode switch to change resolution
• Hold DPI|BT mode switch for about 5 seconds to change Bluetooth channel between BT1|BT2

CHARGING THE BATTERY

• Connect the included USB-C cable to the mouse
• Connect USB plug to a suitable power source (max. output DC 5V 0,5A)
• When the battery is fully charged, the DPI indicators will stop moving.

Note: When the battery level is too low, the DPI indicator will starts flashing.
Caution: Please charge the battery every 3 months, if you do not use the mouse for a long time. Long-term storage of the mouse with low battery level, or using the chargers with power over 5V 0,5A may damage the battery.

REGULATORY

EU Declaration of Conformity – Hereby, IMPAKT S.A. declares that the equipment type NMG-2113, NMG-2114 is in compliance with
Directives 2014/53/EU, 2011/65/EU and 2015/863/EU. The full text of the
EU declaration of conformity is available via the product tab at www.impakt.com.pl. The WEEE symbol (the crossed- out wheeled bin) usage indicates that this product is not a household waste. Appropriate waste management aids in avoiding consequences, which are harmful for people and environment and result from dangerous materials used in the device, as well as, improper storage and processing of such equipment. Segregated household waste collection allows recycling of materials and components of which the device was made of. In order to get detailed information about recycling of this particular product, please contact your retailer or a local authority.
Frequency range: 2400 – 2483 MHz
Maximum radio-frequency power transmitted: +11,0 dBm

SAFETY INFORMATION

• Use as intended, improper usage may break the device.
• Non-authorized repairs or disassembly voids the warranty and may damage the product.
• Dropping or hitting the device may lead to device being damaged, scratched or flawed in other way.
• Do not use the product in low and high temperatures, strong magnetic fields and damp or dusty surroundings.

GENERAL

• The safe product, conforming to the EU requirements.
• The safe product, conforming to the UKCA requirements.
• The product is made in accordance with RoHS European standards.
• 2 years limited manufacturer warranty

PRODUCT & SUPPORT INFORMATION | PLEASE SCAN QRCODE
© GENESIS. All rights reserved. GENESIS name and logo, and all related product and service names, design marks and slogans are the trademarks or registered trademarks of GENESIS. All other product and service marks contained herein are the trademarks of their respective owners.
WWW.GENESIS-ZONE.COM

CONTACT ME ON
WWW.GENESIS-ZONE.COM/CONTACT

References

• Producent i dystrybutor sprzętu IT | IMPAKT S.A.
• Home - Impakt: AI Coach & Social Fitness Platform
• Producent i dystrybutor sprzętu IT | IMPAKT S.A.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>