GEKO GIF01 Cyclone Fan Wireless Clip Fan with LED Light Instruction Manual
- June 6, 2024
- GEKO
Table of Contents
GEKO GIF01 Cyclone Fan Wireless Clip Fan with LED Light Instruction Manual
Product Sketch
Operation
Fan switch: Press the switch once: low speed Press the switch twice medium speed Press the switch three times: high speed Press the switch four times: stop working
Night light switch: Press the switch once: low light Press the switch twice: high light Press the switch three times: stop working
Power supply: 1.use internal battery 2.use USB wire for power supply *
NOTE : For safety purpose, battery will not be charged while the fan is working; only when the fan is tunred off, battery will start charging.
Specifications
Material : ABS+PP+Metals
Speed regulation : 1.2.3 Gear
Battery : 18650 Li-ion 2000mAh
Charging Time : 3.7hrs
Working Time : Low 6hrs
Mid 2.5hrs
High 1.5hrs
Input : DC-5V-2A
Power consumption : 3.8W
Product size : 143 x 118 x 213mm
Weight : About 350g
Cautions
- Do not use this product in humid atmospheres such as the bathroom, contact with water may cause the failure.
- 1f water or solution enters the product ,turn off the power immediately and let it dry thoroughly and try again.
- Do not impact the product or throw it. Repeated impact may cause internal failure.
- Do not disassemble, modify, or repair this product arbitrarily.
- Be sure to charge the product correctly as the rated label indicated. When charging is completed, be sure to disconnect the USB connector.
- Do not throw this product into fire.
- Do not touch the product with wet hands.
- Please be careful to prevent use by children.
- Please use the product at room temperature from 0-40 degrees.
- Don’t charge the product on flammable material surface.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>