Fego TP36RF433-152 Remote Control Transmitter Instruction Manual

Fego TP36RF433-152 Remote Control Transmitter

Product Information

Specifications:

• Model: TP36RF433-152
• FCC ID: M8C-TP36RF433-152
• Power Source: 1.5V AAA batteries (2 included)
• Number   of code combinations: 32
• Special Function: Remote control for fan operation with multiple speed settings

Product Usage Instructions

Installation

1. Slide the transmitter out of the transmitter holder and attach the holder to a desired location using provided screws.
2. Open the battery cover on the transmitter unit and insert two 1.5V AAA batteries (included).
3. Ensure correct battery polarity, clean battery contacts, and replace the battery cover.

Code Combination Learning

The remote unit comes with 32 different code combinations set by the factory. The ID code is unique for each transmitter and cannot be changed by the user. However, in case of manual code learning necessity, follow these steps:

1. Slide dip switches in the remote to change the combination code.
2. Press the OFF button within 1 minute after restoring power to the fan to complete the code-learning process (the fan will beep five times).

Remote Functions

• OFF: Turns off the fan
• HI: High speed
• MED: Medium speed
• LO: Low speed
• Press a button for 5 seconds to toggle ON/OFF the buzzer

Special Function

• Flip the power switch 3 times within 8 seconds for High speed.
• Flip the power switch 4 times within 8 seconds for Medium speed.
• Flip the power switch 5 times within 8 seconds for Low speed.

FAQ

Q: What should I do if my remote control stops working?

• A: Ensure that the batteries are not flat. If needed, replace them with new ones. Also, make sure each fan has its receiver to function properly.

Q: How can I prevent damage to the transmitter if not using it for a long time?

• A: Remove the batteries from the remote control if not in use for long periods to prevent damage. Store the remote away from excessive heat and humidity.

OPERATING INSTRUCTIONS

1. Slide the transmitter out of the transmitter holder. Select a location to install your transmitter holder. Attach the transmitter holder with the screws provided.
2. Open the battery cover.
3. To make the fan operational, install two 1.5V AAA batteries (included). Replace the battery cover.
   • NOTE: This remote control uses two 1.5V AAA batteries. Replace batteries with the correct size and type of battery.
   • Clean the battery contacts and area inside the device before installing new batteries. Ensure the batteries are installed correctly concerning the polarity ( + and -).
   • NOTE: If not used for long periods, remove the battery to prevent damage to the transmitter. Store the remote control away from excessive heat and humidity.
4. The remote unit has 32 different code combinations, each transmitter of this remote control carries a unique ID code to facilitate communication between paired devices.
   • The ID code is set by the factory and is not user-changeable. However, you will be required to perform an “ID code learning” process manually under these circumstances.
   • If you have multiple fans installed within a proximity and want to control all fans NOT using the same remote transmitter.
   • NOTE: Each fan requires its receiver.
   • When your remote control is not responding (make sure the battery is not flat).
   • After you have replaced a faulty transmitter or receiver with a new one.
   • Otherwise, the remote control will not work.
   • To perform this process manually, follow the steps below: Simply change the combination code by sliding dip switches in the remote.
   • Press the “ OFF” button within 1 minute after restoring power to the fan, the fan will beep five times. This indicates the code-learning process has been completed.
5. Remote functions:
   • OFF: Turns off the fan
   • HI: High speed
   • MED: Medium speed
   • LO: Low speed, Press the button for 5 seconds to turn ON/OFF the buzzer
   • Special function! Start the fan without the transmitter in the following way:
   • Flip the power switch 3 times within 8 seconds to obtain High speed
   • Flip the power switch 4 times within 8 seconds to obtain Medium speed
   • Flip the power switch 5 times within 8 seconds to obtain Low speed

LIMITED LIFETIME WARRANTY

• The manufacturer warrants this fan to be free from defects in workmanship and material present at the time of shipment from the factory for life (with limitations) from the date of purchase.
• This warranty applies only to the original purchaser.
• The manufacturer agrees to correct such defect at no charge or, at our option, replace the ceiling fan with a comparable or superior model.
• To obtain warranty service, present a copy of your sales receipt as proof of purchase.
• All costs of removal and reinstallation are the expressed responsibility of the purchaser. Any damage to the ceiling fan by accident, misuse, or improper installation, or by affixing accessories not produced by this warranty, is at the purchaser’s responsibility.
• The manufacturer assumes no responsibility whatsoever for fan installation during the limited lifetime warranty. Any service performed by an unauthorized person will render the warranty invalid.
• Due to varying climatic conditions, this warranty does not cover changes in brass finish, rusting, pitting, tarnishing, corroding, or peeling. Brass finish fans maintain their beauty when protected from varying weather conditions.
• Any replacement of defective parts for the ceiling fan must be reported within the first year from the date of purchase.
• For the balance of the warranty, call our customer service department at 888 – 251 – 1003 for return authorization and shipping instructions so that we may repair or replace the ceiling fan.
• Any fan or parts returned improperly packaged is the sole responsibility of the purchaser.
• There is no further expressed warranty.
• The manufacturer disclaims any implied warranties. The duration of any implied warranty that cannot be disclaimed is limited to the lifetime limited period as specified in our warranty.
• The manufacturer shall not be liable for incidental, consequential, or special damages arising at or in connection with product use or performance except as may otherwise be accorded by law.
• This warranty gives you specific legal rights, and you also have other rights that vary from state to state.
• This warranty supersedes all prior warranties.
• Note: A small amount of “wobble” is normal and should not be considered a defect.

FCC WARNING

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: The remote control has been tested and found to comply with the limits for Class B digital devices, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
The remote control generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>