Hykolity 4FT 3D Genuine Outdoor Lighted Christmas Tree Instructions
- June 15, 2024
- Hykolity
Table of Contents
Hykolity 4FT 3D Genuine Outdoor Lighted Christmas Tree Instructions
CAUTION: IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
- Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupter (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
- This seasonal use product is not intended for permanent installation or use.
- Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
- Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
- Unplug the product when leaving the house when retiring for the night, or if left unattended.
- CAUTION: This is an electrical product – not a toy! To avoid risk of fire, burns, personal injury and electric shock, it should not be played with or placed where small children can reach it.
- Keep this product well ventilated. Do not cover product with cloth, paper or any material not part of the product when in use.
- Do not use with a voltage converter. Use only with adaptor plug provided
- Do not use this product for other than its intended use.
- Do not hang ornaments or other objects from cord, wire or light string.
- Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
- Never operate this product if the power cord or plug is damaged.
- Use only manufacturer specified replacement bulbs. Read and follow all instructions that are on the product or provided with the product.
USE AND CARE INSTRUCTIONS
- Before using or reusing, inspect product carefully. Discard any product that have cut, damaged or frayed wire insulation or cords, or exposed copper wire.
- When not in use, store neatly in a cool, dry location protected from sunlight.
Parts List
| Locater | Name | Qty |
|---|---|---|
| A | Tree top Star | 1 |
| B | Top tree part | 1 |
| C | Bottom tree part | 1 |
| D | Tree base | 1 |
| E | 4 plugs End Connector | 1 |
| F | Adaptor | 1 |
Hardware List
| Locater | Name | Qty |
|---|---|---|
| G | Zip Tie | 6 |
| H | Screw nuts | 2 |
| I | Ground Stake | 7 |
| J | Rope | 3 |
Diagram of Parts **
**
-
Assembling the Tree Inserted the rods of the Tree Top Star (A) into the holes at the Top tree part(B). Insert the rods of Top tree part (B) into the holes at the Bottom tree part (C), screw the nuts(H). on to make it steady.
-
Assembling the Base Inserted the rods on the Tree (C) into the holes at the Base (D), screw the nuts (H) on to make it steady.
-
Light string connected. 3 Connect the light strings on A,B,C,D with 4 plugs End Connector(E) as rating label instructed, and then connect to Adaptor(F).
-
Assembling the Ground Stakes Insert Ground Stakes (1) into the land to ensure the products security relationship with the ground.
-
Tip-Over Protection w/stakes. Stab the Stakes (1) into the ground for tip-over protection.
SAVE THESE INSTRUCTIONS
Thank you for ordering our product. If you have any questions, please feel
free to contact us at (562)456-0507/
[email protected]. We always find ways to
improve!
