SZELAM 5E-7KTI-SEOM Digital Alarm Clock User Manual

SZELAM 5E-7KTI-SEOM Digital Alarm Clock

Notes

1. Some scratches appear on the protective film due to long-distance transportation, please tear the protective film off before using it. (Tips: As our protective film is very thin and fits well, it requires a little patience to find it and tear it off. ) Please feel free to contact us if you have any other problem, we will try our best to solve it.
2. Auto Brightness Mode and Night Mode cannot be turned on simultaneously.
3. The supplied battery is only for memorizing the time settings; it just could keep time memory when power off, and couldn’t support the digital clock light up.
4. Please remove the plastic insulator tab from the button battery compartment in the back and connect the product with electricity by USB or Adapter.
5. If the time mode is the 12-hour mode, when is Afternoon Time, there is a “PM” symbol in the display, when is Morning Time, there is no “PM” symbol in display.

Product Parameter

1. LED Time display (The default time display is 0:00).
2. There are 3 levels of brightness ( The default setting is the brightest light).
3. Night mode with automatic dimming.
4. Total 4 functional buttons: “M” -Mode button, “+” -Up button, ” “-Down button, “SNOOZE.
5. Two kinds of time mode options ( 12/24 hour modes selectable).
6. The default Alarm display is 6:00.
7. Alarm with Pre-Settable Snooze function ( 5 minutes ).
8. Snooze lasts for 5-60 minutes and unlimited times.
9. Power supply: When powered by DC power, the LED is long and bright and all functions are normal. When powered by a built-in button cell, the LED light is off and no display, but can keep the time normal walking and the original setting
10. There are 2 USB Output ports on the side (5V, 1A) which allow you to charge an Android or Apple system phone in the same time.

Introduction of Buttons

Operating Instructions

Note: Please remove the plastic insulator tab from the button battery compartment in the back and connect the product with electricity by LISB or Adaptor

TIME SETTING

• First Press and hold “M” button for more than 3 seconds to start setting time mode. There is“12/24 hours” mode.
• Adjust the data using “+” or “-” button. For example, if you choose “24 hours” mode, but “12 hours” in display, then you can press “+” or “-” to adjust.
• After “12/24 hours” mode is setting, you can press “M” once to enter LED Time setting. The sequence is “Hour”–“Minute. First is “Hour” setting, adjust the data using “+”or“-”button, after “Hour” setting is done, press “M” to enter “minute” setting.
• Remarks： In LED Time setting, there is no “AL” symbol in LED Time display. Adjust the data using “ + ” or “ – ” buttons, after setting, press “M” once to enter next setting or to confirm. In setup mode, the setting object is flashing. After setting is done, the setting object is not flashing.

Alarm Setting and Snooze Setting

• After LED Time setting is done, press “M” once to enter Alarm setting, then press and hold “M” button for more than 3 seconds to make “Hour” – “ Minute”- “Snooze time ”setting.
• First Adjust the data using “ + ” or “ – ” buttons to make “hour” setting , then press “M” once to enterminute setting.
• After Alarm is finished, then press “M” to enter snooze time setting. The default Snooze time is 5 minutes, “05” digit is flashing (represents of 5 minutes) . You can press “+” or “ – ” button to set 5-60 minutes snooze time. After snooze time setting is done, press “M” once to confirm.
• Remarks: Turn on and turn off Alarm: Press ” – ” to select. For example, when you press “ – ” once, you can see “AL” symbol in LED Time display and Alarm display. Next you press “-” again, you can see “AL” symbol only in Alarm display. (There is “AL” symbol both in LED Time display and Alarm displaymeans Alarm is turn on.
• Please check below pictures of LED Time display and Alarm display when Alarm is turn off.

When the Alarm Beeps

• BUZZER alarm last for 2 minutes.
• When the alarm beeps, press “SNOOZE” button to enter snooze mode. The corresponding “AL” symbol flashes till reach to the snooze time set and then alarm again.
• When the alarm beeps, press any other buttons except the “SNOOZE” button to turn off the alarm and snooze. AL symbol stops flashing.

Automatic & Manual Dimming Set

• Press and hold “+” button for more than 3 seconds.
• “OFF” displays which means manual mode.
• In manual mode, press the “+” key to select light brightness : bright – medium – dark level by cycle.
• Press and hold “+” button for more than 3 seconds.
• “ON” displays which means auto mode.
• The default is auto mode, which means the brightness is changing automatically by the environment, when the environment is dark, the brightness is low; when the environment is bright, the brightness is high.

Night Mode Setting

• Night mode means that LED automatically enter into the lowest brightness display status at night. In LED Time display mode, press “M” button twice to turn on the night mode setting. Select “ON” or “OFF” by pressing “+” or “-” manually.
• The default period of 18:00 to 6:00 the next day, it will automatically enter into lowest brightness display status. When night mode is “ON”, Press and hold “M” button for more than 3 seconds to enter interval time setting mode. The setting sequence is: “start hour”-“start minute”- “end hour”-“end minute*. At start hour and minute setting status, the upper point in the center of the screen is flashing.
• At end hour and minute setting status, the lower point in the center of the screen is flashing.
• Remarks: Auto Brightness Mode and Night Mode cannot be turned on simultaneously.
• If you need to make Night Mode setting, please make sure the dimming setting (Brightness Mode) is manual. You can choose any time for interval time setting.

FREQUENTLY ASKED QUESTIONS

What brand manufactures the SZELAM 5E-7KTI-SEOM Digital Alarm Clock?

The SZELAM 5E-7KTI-SEOM Digital Alarm Clock is manufactured by SZELAM.

What type of display does the SZELAM 5E-7KTI-SEOM Digital Alarm Clock have?

The SZELAM 5E-7KTI-SEOM Digital Alarm Clock features a digital display.

What are the special features of the SZELAM 5E-7KTI-SEOM Digital Alarm Clock?

The special features of the SZELAM 5E-7KTI-SEOM Digital Alarm Clock include 12/24h mode, auto-dimmable display, and a mirror surface.

What are the dimensions of the SZELAM 5E-7KTI-SEOM Digital Alarm Clock?

The dimensions of the SZELAM 5E-7KTI-SEOM Digital Alarm Clock are 6.2 inches in width and 3.1 inches in height.

What is the power source for the SZELAM 5E-7KTI-SEOM Digital Alarm Clock?

The SZELAM 5E-7KTI-SEOM Digital Alarm Clock is powered by corded electric.

What rooms is the SZELAM 5E-7KTI-SEOM Digital Alarm Clock suitable for?

The SZELAM 5E-7KTI-SEOM Digital Alarm Clock is suitable for use in the living room, home office, kid's room, and dining room.

Can the SZELAM 5E-7KTI-SEOM Digital Alarm Clock be used indoors or outdoors?

The SZELAM 5E-7KTI-SEOM Digital Alarm Clock is designed for indoor use only.

What material is the SZELAM 5E-7KTI-SEOM Digital Alarm Clock made of?

The SZELAM 5E-7KTI-SEOM Digital Alarm Clock is made of Acrylonitrile Butadiene Styrene (ABS).

What is the mounting type of the SZELAM 5E-7KTI-SEOM Digital Alarm Clock?

The SZELAM 5E-7KTI-SEOM Digital Alarm Clock can be mounted on a desk or wall.

What type of watch movement does the SZELAM 5E-7KTI-SEOM Digital Alarm Clock have?

The SZELAM 5E-7KTI-SEOM Digital Alarm Clock operates with a mechanical watch movement.

What is the operation mode of the SZELAM 5E-7KTI-SEOM Digital Alarm Clock?

The SZELAM 5E-7KTI-SEOM Digital Alarm Clock operates in mechanical mode.

How much does the SZELAM 5E-7KTI-SEOM Digital Alarm Clock weigh?

The SZELAM 5E-7KTI-SEOM Digital Alarm Clock weighs 6.7 ounces.

What is the item model number of the SZELAM 5E-7KTI-SEOM Digital Alarm Clock?

The item model number of the SZELAM 5E-7KTI-SEOM Digital Alarm Clock is 5E- 7KTI-SEOM.

What care instructions are provided for the SZELAM 5E-7KTI-SEOM Digital Alarm Clock?

Before using the alarm clock, please remove the screen protector for clearer visibility. Additionally, note that a power adapter is not included, so an additional adapter is required for operation.

What is the warranty description for the SZELAM 5E-7KTI-SEOM Digital Alarm Clock?

The SZELAM 5E-7KTI-SEOM Digital Alarm Clock comes with a 30-day unconditional refund/exchange policy and a 1-year warranty.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:SZELAM 5E-7KTI-SEOM Digital Alarm Clock User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>