GMK MX-3282 Floor Light Smart LED Lamp Instruction Manual

MX-3282 FLOOR LIGHT
Instruction Manual

POWER SATION INSTALL INSTRUCTION

1. SCREW
2. DC HOLE
3. NUT
4. DC WIRE

INSTALL STEP

1. PUT THE POWER SATION ON THE NUT
2. TWIST THE NUT(3) WITH SCREW(1)
3. CONNECT THE DC WIRE(4)WITH DC HOLD

OPERATION BY FLOOR LIGHT

1. ADJUST BRIGHTNESS
   ● One click the to increase brightness it would be have 10 levels brightness.
   ● Hold press the to increase brightness continuity. it would have 10 levels brightness.
   ● One click the to reduce brightness, it would be have 10 levels brightness.
   ● Hold press the to reduce brightness continuity. it would have 10 levels brightness.

2. ADJUST COLOR TEMPERATURE
   One click from 2700K-3500K-5500K-6500K to select the color temperature.

3. POWER OFF MEMORY FUNCTION
   The intellicent LED light has a state memery function. When each light is adiusted to the appropriate color temperature and brightness, when the remote control or the ordinary wall switch is turned off and on again, the state of the light is the state before the last time the light was turned off .

POWER STATION INSTRUCTION

1. Build in 9V-1A wireless charging function, put device on the power station plate centre to activate.
2. Build in 5V-2A output charging,connect device to charging.

OPERATIONL BY REMOTE CONTROL

1. PAIR
   The remote control needs to be coded before it can be used. The method is as follows :
   The floor light connect to power supply, hold press the of the remote control at the same time, after the light blink 1 times the setting finish.

2. ADJUST BRIGHTNESS
   ● One click the to increase brightness. it would be have 10 levels brightness.
   ● Hold press the   to increase brightness continuity. it would have 10 levels brightness.
   ● One click the to reduce brightness,it would be have 10 levels brightness.
   ● Hold press the to reduce brightness continuity it would have 10 levels brightness.

3. ADJUST COLOR TEMPERATURE
   One click 2700K – 3500K – 5500K – 6500K to select color temperature.

4. SETTING TIME TO TRUN OFF LIGHT
    setting after 60 second to turn off floor light ;  setting after 1 hours to turn off floor light.

5. EXPRESS MODE SETTING
   there can be setting 3 express mode, the method as follows:
   Choose the brightness and color temperature as you want, hold press any express mode button of remote control 2-3 second, after floor blink 1 times finish the setting.

6. POWER OFF MEMORY FUNCTION
   The intellicent LED light has a state memery function. When each light is adiusted to the appropriate color temperature and brightness, when the remote control or the ordinary wall switch is turned off and on again, the state of the light is the state before the last time the light was turned off .

SMART HOME OPERATION

Software User Manual for IOS APP installation instructions:
Method 1 : Search Magic Home Pro in “APP Store” .Orclick the bellow link and download the app. http://Air.magichue.nev/8d6a

Method 2: Download the APP by scanning the below QR code for free.

http://app.magichue.net/download/mgchomepro/AppDown.aspx

Installation details as below

Software User Manual for Android.
APP installation instructions:
Method 1: Search Magic Home Pro in “Google Play Store” or from browsers. Installation details as follow. Method 2: Download the APP by scanning the below QR code for free.

http://app.magichue.net/download/mgchomepro/AppDown.aspx

Installation details as below

Instructions
There are three different ways to connect the controller after it has been connected to the power supply.
a) Wi-Fi mode: This mode needs register and login after complete 1 to 1 Mode.(Please refer to connection mode c) Make sure the controller has been powered and never been set, please operate as below steps.
b)1.Click “+” in the upper right corner and click “Connect light to Wi-Fi network”2.Register and login account![GMK MX-3282 Floor Light Smart LED Lamp

• Register](https://manuals.plus/wp-content/uploads/2023/12/GMK-MX-3282-Floor- Light-Smart-LED-Lamp-Register.jpg)3.Connect the device to the router

C) Remate control via Intemet:
Here you can locate the Wi-Fi controller via the intemat from anywhere in the world In Wi-Fi mode (connect moda(a)).Keep the Wi-Fi router online, no matter where you are .you still can control your lights with APP as long as there’s Wi-Fi/9G/4G internet for your smartphoned) 1 to 1 Mode: Open mobile Wi-Fi network signal, find “LEDnet**”signal and connect, then open Magic Home Pro APP If the network connect successfully you can enter the APP for operation.
works with Google Assistant

Step 1: Create your Magic Home cloud account
In order to control your smart light with the Google Assistant or control them remotely you need to create a Magic Home cloud account and sign in. Step 2: Add your light and modify the name
Make sure there is at least one smart light in device list, and enable your lights for remote control. On “Home” page, long press the light to rename. Step 3: Add Home Control Action
Click “Home control”’on“Home’APP. Select “Magic Home WiFi” The account and password must be same as the one you created in Magic Home Pro APP.

Step 4: Login with your app account
Enter your app account and password to finish the account linking. (Use the Magic Home cloud account you used on step 1). Your lights will be listed on “Home Controlinterface .

Step 5 : Control your light
Here, you finish all setups. You can now control your lights by issuing voice commands.
Supported Commands:
Say “Ok Google” or “Hey Google”, then..
Tur on
Turn on/off all the lights

WORKS WITH amazon alexa
Step 1: Create your Magic Home cloud account
In order to control your smart light with the Amazon Echo or control them remotely, you need to create a Magic Home cloud account and sign in. Step 2: Add your light and modify the name
Make sure there is at least one smart light in device list, and enable your lights for remote control. On “Home” page, long press light to rename.

Step 3: Enable Alexa Skill
The next step is to download the Amazon Alexa app , open the Amazon Alexa app and under the skills section, search for the “Magic Home?” skill. The account and password must be same as you created in Magic Home Pro APP.

Step 4: Login and Discover Devices

Use your Magic Home cloud account you created in step 1 to sign in to “Magic Home” Skill.
The next step is to discover your smart lights from Alexa app. You can say “Alexa, discover devices”.
Once Alexa has completed discovering your smart lights, they will be shown in the Smart Home section in Alexa app.

Step 5 : Control your light
Here, you finish all setups. You can now control your lights by issuing voice commands.
Supported Commands:
These are some of the currently supported Alexa voice commands for the smart light.
Alexa, turn [light name] on/off

Reset

if you want to reset the device,should be operation as follow STEP 1.power off the device STEP 2. connect power and cut off it 3 times(even operation should be more than 2 second)

Share

If you want to share the device to other people,the operation is as follows STEP 1.Open Device Settings in APP, and click the device you are currently using to enable remote Settings. STEP 2.Go to Device Information and click Share Device. Add a share and enter the email address for the share

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>