SVEN RX-140 Wireless Mouse User Manual
- June 9, 2024
- SVEN
Table of Contents
SVEN RX-140 Wireless Mouse
Congratulations on purchasing the SVEN mouse!
Please read this User’s Manual before using the unit and retain this User’s Manual in a safe place for future reference.
COPYRIGHT
© SVEN PTE. LTD. Version 1.0 (V 1.0). This Manual and information contained in it are copyrighted. All rights
TRADEMARKS
All trademarks are the property of their legal holders.
NOTICE OF RESPONSIBILITY RESTRICTION
Despite the exerted efforts to make this Manual more exact, some discrepancies may occur.
The information in this Manual is given on «as is» terms.
The author and the publisher do not bear any liability to a person or an
organization for loss or damage which has arisen from the information
contained in this Manual.
- Shipping and transportation equipment is permitted only in the original container.
- Does not require special conditions for realization.
- Dispose of in accordance with regulations for the disposal of household and computer equipment.
SAFETY PRECAUSIONS
- Protect your mouse from high humidity, dust or high temperatures.
- Do not use gasoline, spirit or other dissolvent for cleaning. This may cause damage to the surface. Clean the device with soft cloth.
- Do not attempt to disassemble or repair your device.
- Protect the device against powerful shocks and falls — they may damage the internal electronics.
APPOINTMENT
RX-140 is an input device. It should be used for input (entering) information into the computer and operation on it.
PACKAGE CONTENTS
- Wired mouse — 1 pc
- User manual — 1 pc
SPECIAL FEATURES
- Switching DPI modes
- Symmetric form
- Rubber scroll wheel
- Suitable for left-handers
- Plug&Play technology
- SYSTEM REQUIREMENTS
- Windows/Mac OS
- Free USB port
CONNECTION AND INSTALLATION
Connect the mouse to an available USB port of your PC. Turn on your PC. Installation of the mouse is automatic.
TROUBLESHOOTING
| Problem | Solution |
|---|---|
| The mouse is not working. |
- Disconnect the mouse from your PC and check the connector pins for possible damage. If there is no external damage found and the connector pins are OK, connect the mouse to your PC again.
- Address your nearest authorized service center.
If none of the above mentioned solutions removes the problem, please consult a nearest authorized service center. Never try to repair the device on your own.
CUSROMER SUPPORT
Technical support: www.sven.fi.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>