Goldair GSDF315 30cm Desk Fan Instruction Manual

Goldair GSDF315 30cm Desk Fan

General Care and Safety Guide

Thank you for choosing this Goldair product. This Goldair appliance has been designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, will give you years of useful service. Please read these instructions carefully and keep them for future reference.

1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
4. Ensure that the fan is switched off from the supply mains before removing the guard.
5. Use only the voltage specified on the rating plate of the appliance.
6. Keep all objects at least 1 Metre from the front, sides, and rear of the appliance
7. This appliance is intended for household use only and not for commercial or industrial use.
8. Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock, or injury.
9. The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
10. Always unplug appliances when not in use.
11. When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Goldair Customer Services Team.
12. If your appliance does not work or is not working properly, contact the place of purchase. Repairing work on the appliance by unqualified persons can cause serious risks to the user.
13. Ensure hands are dry before handling the plug or the main unit.
14. Carry out regular checks of the supply cord to ensure no damage is evident.
15. Ensure that the cord is fully extended (not coiled) while in use.
16. Avoid contact with the moving parts. Keep hands, hair, and clothing, away from the blade of the fan during operation to reduce the risk of injury to the person and/or damage to the unit.
17. Switch off and use handles provided when moving.
18. It is recommended that this fan is plugged directly into the wall socket.
19. A correctly specified, undamaged extension cord may be used with this fan provided it is used in a safe manner.
20. Never place the appliance close to a radiant heat source.
21. Never operate in areas where petrol, paint, or other flammable liquids are used or stored.
22. Never use the appliance to dry clothes.
23. Never insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire, or damage to the appliance.
24. Never use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) and rinsed in hot soapy water only. Always remove the plug from the mains supply before cleaning.
25. Never connect the appliance to the mains supply until completely assembled and adjusted.
26. Never remove the plug from the power socket until the appliance has been switched off.
27. Never remove the plug from the power socket by pulling the cord – always grip the plug.
28. Never twist the kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use.
29. Never use this appliance in the immediate surroundings of a bath, a shower, a swimming pool, or other liquids. The appliance must not be immersed in any liquids.
30. Due to the risk of injury, never use this appliance for any purpose other than its intended use. This appliance is intended for use in household and similar applications such as staff kitchen areas in shops, offices, and other working environments; farm houses, by clients in hotels, motels, bed and breakfast type environments, and other residential type environments
31. Never use this appliance outdoors.
32. Never operate the appliance with a damaged cord or plug, after it malfunctions, or if it has been damaged in any manner. Has the appliance been checked and repaired by a qualified electrician if repair is necessary?
33. Never place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.

Components

1. Front guard
2. Spinner
3. Fan blade
4. Guard mounting nut
5. Rear guard
6. Motor housing
7. Oscillation knob
8. Speed Controls
9. Locking nut
10. Base surround
11. Screws

Assembly

The molded base surround is supplied with 3 retaining screws (in a small bag taped to the inside of the surround). Remove the bag containing the screws and position the surround on the molded retaining clips on the base and snap it into place. Ensure that the surround has clipped firmly into position onto the fan base and screw the 3 retaining screws into the holes across the middle of the base. Do not over-tighten these screws.

Take off the guard lock nut from the motor shaft. Place the rear guard on the front of the motor housing. Line up the lugs on the front of the motor housing with the holes in the rear guard. Screw on guard lock nut tightly to attach rear guard.

Place the fan blade on the motor shaft and secure it by tightening the fan blade nut.

Fit the front guard (1) onto the rear guard and close the clips, then secure the grill with the small screw provided.

Operating your Fan

Always choose a safe location for the fan, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. This appliance requires no installation, it should be used solely as a portable appliance.

WARNING:
Keep all objects at least 1 meter from the front, sides, and rear of the appliance. Place the fan on a dry, level, and sturdy surface.

Check that the fan control switch is set to the off position before plugging into the mains supply.

Fan control
The control button positions are:

• 0 = OFF
• 1 = Low Speed
• 2 = Medium Speed
• 3 = High Speed

To operate the fan press desired speed control button. To activate the oscillation function, push down the oscillation pin on the top of the motor. The fan will then oscillate until the pin is pulled back up. To tilt, loosen the neck screw – adjust to position – then tighten the neck screw to hold.

IMPORTANT! NEVER COVER THIS APPLIANCE!

Cleaning

• The fan requires regular cleaning to ensure trouble-free operation.
• Ensure that the fan is switched off from the supply mains before removing the guard.
• Unplug the fan from the mains supply before cleaning.
• Use a damp cloth (not wet) to wipe the exterior of the fan to remove dust and dirt.
• Use a vacuum cleaner to remove dust and fluff from around the grills.
• Ensure the fan is dry before plugging back into the mains supply.
• Do not attempt to dismantle the fan. There are no user-serviceable parts. For service or repair, contact an authorized electrical service technician.

One Year Warranty

Thank you for purchasing this Goldair product. Your product is warranted against faults and manufactured when used in normal domestic use for a period of one year. For non-domestic use, Goldair limits the voluntary warranty to three months. Goldair undertakes to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period. This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or work carried out by anyone other than a qualified electrical service technician.

PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits to you given by this warranty are in addition to other rights and remedies available to you under a law in relation to the goods or services to which this warranty relates. In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

In New Zealand, this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act (1993).

Goldair – New Zealand CDB Goldair
PO Box 100-707 N.S.M.C Auckland, 0745 Phone +64 (0)9 917 4000 Phone 0800 232 633 www.goldair.co.nz.

Goldair – Australia
CDB Goldair Australia Pty PO Box 574 South Morang Victoria, 3752 Phone +61 (0)3 9365 5100 Phone 1300 GOLDAIR (1300 465 324) www.goldair.com.au.

Due to continual design improvements, the product illustrated in this User Manual may differ slightly from the actual product

New Zealand
PO Box 100707, North Shore Mail Centre, Auckland, 0745 www.goldair.co.nz.

Australia
PO Box 574, South Morang, Victoria, 3752 www.goldair.com.au.

References

• Goldair Australia
• Goldair Australia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>