DOYOKY JC01 RETRO Game Controller User Guide

: June 17, 2024
: DOYOKY

Table of Contents

DOYOKY JC01 RETRO Game Controller
Product Information
Product Usage Instructions
FAQ
Layout
Wired Pairing
Wireless Pairing
Mapping
Turbo Function
Vibration Adjustment
Status
For More Info
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DOYOKY JC01 RETRO Game Controller

DOYOKY-JC01-RETRO-Game-Controller-fig-1

Product Information

Specifications:

Model: 8FMDPNF(VJEF
Buttons: M button, Turbo button, R4 button, L4 button
Charge lamp and charging port

Product Usage Instructions

Charging the Device:

Connect the charging cable to the charging port on the device.
Plug the other end of the charging cable into a power source.
The charge lamp will light up to indicate that the device is charging.
Once fully charged, the charge lamp will turn off.

Using the M button:
Press the M button to perform a specific function or activate a mode. Refer to the user manual for details on the functions and modes available.

Using the Turbo button:
Press and hold the Turbo button to activate the turbo mode. This mode provides increased speed or power for certain functions. Release the button to return to normal mode.

Using the R4 and L4 buttons:
The R4 and L4 buttons can be used for specific actions or assigned functions based on your preferences or the application you are using. Refer to the user manual for more information on how to customize these buttons.

FAQ

How do I charge the device?
To charge the device, connect the charging cable to the charging port on the device and plug the other end into a power source. The charge lamp will indicate when the device is charging and turn off when fully charged.
What is the purpose of the M button?
The M button is used to perform specific functions or activate different modes. Please refer to the user manual for more information on the available functions and modes.
How do I activate the turbo mode?
To activate the turbo mode, press and hold the Turbo button. This mode provides increased speed or power for certain functions. Release the button to return to normal mode.

Layout

DOYOKY-JC01-RETRO-Game-Controller-fig-2 DOYOKY-
JC01-RETRO-Game-Controller-fig-3

Wired Pairing

Please make sure that the Switch has turned on the wired connection mode.(Setting – Controllers and Sensors – Pro Controller Wired Communication).
Attaching the controllers to the Switch will connect them automatically.

DOYOKY-JC01-RETRO-Game-Controller-fig-4

Wireless Pairing

The Joy-Con controllers will remain paired when you detach them from the Switch, and you’ll be able to use them wirelessly.

Reconnection
Press the button or the button to reconnect the Switch, 4 LED indicators on the side will start to ﬂash in a regular pattern as an indication of reconnecting.

Mapping

Note: The M button on the left controller can only assign the buttons on the left controller. Same goes for the M button on the right controller.

Seting

L: Hold down the M button and press the button you want to assign to the L4 button for left controller. (Controller will vibrate.)
R: Hold down the M button and press the button you want to assign to the R4 button for right controller. (Controller will vibrate.)
*The above steps can directly change the button to be set.

Cancel
Hold the M button for 5 seconds to cancel the assaign function of the controller.(Control-ler will vibrate.)

Buttons can be set

Left controller: L / ZL / Left stick button and Control Pad (Up / Down/ Left/ Right).
Right controller: R / ZR / Right stick button and A / B / X / Y button.

Turbo Function

Note: The Turbo button on the left controller can only set the buttons on the left controller. Same goes for the Turbo button on the right controller.

Seting

Hold down the Turbo button and then press the button that you want to set for the 1st time to turn on the normal turbo function. (Controller will vibrate.)
Hold down the Turbo button and then press the button that you want to set for the 2nd time to turn on the automatic turbo function. (Controller will vibrate.)

Cancel

Hold down the Turbo button and then press the button that you have set for the 3rd time to turn oﬀ its turbo function. (Controller will vibrate.)
Hold the Turbo button for 5 seconds to cancel the Turbo function of all buttons. (Controller will vibrate.)

Buttons can be set

Left controller: L / ZL / 3L button and Control Pad (Up / Down/ Left/ Right).
Right controller: R / ZR / 3R button and A / B / X / Y button.

Vibration Adjustment

Press the Turbo button and move the Joy-stick left or right to adjust the vibration level of each controller. (Controller will vibrate.)

There are 3 levels of Vibration：100%，50% ，0%.

Status

Wake Up
After the ﬁrst successful connection, press the button to wake up the switch and reconnect (other buttons can not wake up).
Low Battery
When the battery power is low, the LED1-LED4 indicator lights ﬂash quickly at the same time.
Charge
Charging： The LED1-LED4 indicator lights slowly and Charge lamp will turn red. Full： The LED1-LED4 indicator lights oﬀ and Charge lamp will turn green.