JOMISE G812 Dual Dash Camera User Manual

MISE G812 Dual Dash Camera User Manual

Notice: To avoid product loss caused by improper operation, please read the safety information of all operating instructions in this manual before using this product.

PRECAUTIONS

• Please read this manual carefully before operation and keep it for future reference. It will be helpful should you encounter any operational problem.
• Improper installation will void the manufacturer’s warranty. The installation instructions do not apply to all types of vehicles and are written as guidelines to assist in installing the system.
• Consult an experienced technician if you are not comfortable installing the product.
• Please make sure to read and understand call local laws and regulations regarding cameras and their use in a vehicle. Laws vary by state.
• Do not obscure the view of the road ahead or impede the deployment of any airbags in the event of an accident.
• When not in use, please disconnect the car adaptor from both the12/24V DC outlet in your vehicle and the device itself.
• Only clean the device with a soft dry cloth, for tough dirt, apply some neutral detergent diluted in 5 to 6 parts water to a soft cloth.
• Note that alcohol, thinner, benzene, etc could cause damage to the paint or coatings.
• Avoid making contact with the Lens as damage may be caused.
• The video recordings made by this Digital Video Recorder are intended for personal use only.
• Whilst driving, do not adjust the controls of your device as this is a distraction to driving.

SPECIFICATION

Rear Camera: 1920 x 1080P
Lens| Front Camera: F1.8 170°
Rear Camera: F2.0 150°
Recording Format| TS
Photo Format| JPG
Memory Card| 32G~128G U1 Micro SD card
Storage Temperature| -40℉~176℉
Operating Temperature| -4℉~158℉
Product Weight| 2.31 lb
Item Dimension| 10.1 x 2.9 x 1.7 (in)
Power Interface| Type-C 5V/3A

PACKAGE CONTENTS

• JOMISE G812 Mirror Dash Cam
  

• GPS Receiver
  

• Backup Camera *1

• Backup camera cable (21ft) *1

• Car Charger *1

• User Manual*1

• Straps *4

• Cleaning Cloth*1

INSTALLATION

WARNING

• Please MAKE SURE to connect all cameras and wires BEFORE power ON the Mirror Screen, otherwise, the camera cannot work properly.
• Please follow the instructions below for the first-time installation of the Stream Media Mirror Dash Camera. lt is designed to be fitted to the existing rear-view mirror using the straps.

Insert Micro SD Card

Insert the Micro SD Card into the stream media mirror dash camera, taking care that the gold contacts are facing towards the backside of the stream media mirror dash camera. Push the memory card until it clicks into the slot.

Notice:

• Use the edge of a small coin ( or similar object ) to push the memory card into slot if required. Take care that the card has clicked into slot, a second push inwards will release the memory card.
• Do not remove or insert the memory card when the Mirror Dash Cam is turned on. This may damage the memory card.
• Take care when removing the SD card from the Mirror Dash Cam when it is installed in the vehicle. Due to the card slot mechanism, the card will spring from the slot when released.
• Periodically reformat the memory card. Every 2-3 weeks we recommend that you reformat the memory card. This will wipe any files from the card and set it up afresh for continued use with your Mirror Dash Cam.
• Of course, you should only do this after you’ve downloaded any files from the SD card that you may want to keep, as formatting the card will remove all content.
• Format your memory card using the Mirror Dash Cam. This will make sure that the card is structured specifically for your camera.
• Press to enter into the setting and choose the Format Card option to follow the on-screen instructions accordingly

Mount the Mirror Dash Cam

Step 1: Attach the upper end of the straps to the retaining hooks on the top of the rear-view mirror.

Step 2: Pull out the front lens of the JOMISE G812 to match the rearview mirror of the vehicle.

Step 3: Extend the straps around the back of the rear-view mirror and attach them to the bottom retaining hooks.

Rear Camera Installation

Use the provided double-sided tape or screws to fix rear camera. The angle can be adjusted, so be sure to find a perfect viewing angle for your camera before fix it.

• Install inside the vehicle
  

• Install outside the vehicle
  

Notice:

• Make the connection first and ensure the machine work well before installing.
• Keep away with the driving operation and the active part of the car. Do not get caught by screws or seat gaps.
• When drilling holes in car, please do not break the vibrator, tank and wires.
• Before attaching the double-sided tape, please remove stain or oil with alcohol cleaner from the surface.
• When temperature is low, please warm up the mounting surface with dryer, in order to improve the adhesion before sticking.
• The provided 3M sticker cannot be reused, or the adhesion will not be strong enough.
• Do not disassemble or change any part of this product, this will not be covered by warranty.

Wiring Images

Wire Layout in the Vehicle

Step 1: The car charger is connected to the cigar socket.
Step 2: Connect JOMISE G812 to the car charger.

Step 3 : Connect the rear camera cable with the mirror dash cam along the car body, by joining the pillar inside to the rear camera.

PRODUCT OVERVIEW

Appearance Description

the powe

1. Recording
2. Date & Time
3. Playback
4. Settings
5. Start / Pause Recording
6. Snapshot
7. Front / Rear Image Switch
8. Lock / Unlock
9. Speed
10. Driving Direction
11. Screen Brightness Adjustme
    

Notice: You need to pause recording before entering into settings.

SETTINGS

• Loop Time: Set the video recording loop time.

  • 1 Min
  • 2 Mins
  • 3 Mins

• Resolution: Adjust the resolution of the video recording.

  • 1080P
  • 720P

• Audio   Recording: Turn on/off audio recording.

• Power   Off: Automatic shut-down.

  • Off
  • 1 Min
  • 2 Mins
  • 3 Mins
    

• Clock Settings: Set the current time and date. This function allows for manual time setting if GPS is not available. Once a GPS signal is received, the time and date will be updated automatically.

• Time format: Set the 12H/24H time display format according to usage habits.

  • 12-Hour Time
  • 24-Hour Time

• Language: Set the language
  

• Volume setting: Turn on/off the volume.

• Frequency: Set the screen refresh frequency.

  • 50 Hz
  • 60 Hz

• Screen Saver: Set the screen saver time.

  • Off
  • Display Off
  • Low brightness
  • Time and Date

• G-Sensor: Select the sensitivity of the G-Sensor or turn it off. The locked files will not be overwritten. Please copy important locked files to your computer for storage, and format the SD card regularly.

  • Off
  • High
  • Middle
  • Low
    

• Parking Monitoring: Start the parking guard function (according to the preset G-Sensor sensitivity, the emergency video recording is automatically started after the vehicle is shaken, this function requires a hard-wired kit to be used normally).

  • Off
  • High
  • Middle (Recommend preset level).
  • Low

• Time Zone: Select the time zone of your location. The system will set a date and time according to the GPS location.

• Volume setting: Set the volume.

• GPS Information: Show the Longitude, Latitude, and other GPS information.
  

• GPS Disp: Turn on/off the display of GPS information on the recording interface.

• Speed Unit

  • MPH
  • KM/H

• Over speed remind: You can set 20mph-100mph Overspeed warning, when the speed reaches the preset speed, JOMISE G812 will beep to remind the driver (this function needs to be connected to the GPS module).

• Vertical Flip: Vertically flip the view of the rear camera.
  

• Rear Cam Mirror Image: Mirror flip the rear camera view.

• Show reversing line: To display the reversing guideline, you need to connect the trigger wire (red wire) at the end of the rear camera to the positive pole of the reverse lamp.

• Reversing auxiliary line calibration: You can adjust the reversing guideline according to the actual environment.

• Reset Setup: Restore the initial settings.
  

• Format SD-Card: Clear all data files on the Micro SD card (please save important video files before formatting, and format the Micro SD card regularly).

• FW Version: View the firmware version information.

Brightness Adjustment

Touch the pointed area first, a scrollbar will come out, then slide to left or right (+/-) to adjust the brightness.

Data Playback

To select a video or photo for playback, press the button.
Slide to select the desired file form the list and then press the file name to start playback.

Video
Lock Video
Photo
Front/Rear

Lock/unlock the file.
Start or pause the playback.
Delete the file.
Display the previous photo/video.
Display the next photo/video.
Return to the list.

View GPS Data with Software [GPSPlayer]

If you need to track GPS information, please download the dedicated player, the download link(Compatible with Mac/Win) is as follows:
http://gpsplayer.net/setup.html
By using the file playback software [GPSPlayer], you can check all drive information such as Time, Location, Speed, and so on.

1. Playback Screen: Playback screen display
2. Scroll Bar: Click, can speed forward or back
3. GPS Information: Including Latitude, Longitude, Speed
4. Map Display: Show the location of the car on the map
5. Playlist: The data list for playback
6. G-sensor Data
7. Play/Pause

TROUBLESHOOTING

• The power does not turn on
  Please check that the cigarette power cable is not damaged, and whether the indicator light of the cigar plug is on.

• The power is on but this device can not be turned on
  When checking that the cigarette plug power supply is right in place, please long press the power button to see whether it is turn on. If it still cannot be turned on, please reset it.

• Stop recording as soon as it start recording
  Please check that the mirco SD Card is inserted, and the capacity of the Micro SD card.

• Time display is incorrect after setting
  Please ensure to choose the correct time zone when GPS antenna is connected.

CUSTOMER SUPPORT

Your experience is our focus.
Any feedback or suggestions from you are very important to us.
We are very happy to listen to the voices from customers.

After-sales Support E-mail
jomise-us@jomise-cam.com

WhatsApp

https://www.facebook.com/Jomiseofficial

Made in China

Documents / Resources

| JOMISE G812 Dual Dash Camera [pdf] User Manual
G812 Dual Dash Camera, G812, Dual Dash Camera, Dash Camera, Camera
---|---

References

• GPSPlayer download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>