AUTOAQUA SATO-286P Smart ATO Duo G2 Filler Water Level Controller W/Pump User Manual

AUTOAQUA SATO-286P Smart ATO Duo G2 Filler Water Level Controller W/Pump

List of Parts

List of Parts (Can Be Purchased Separately)

Installation

1. Mount the square dual sensor at the normal water level (with the water level reaching the lower one) on the tank/sump with the magnet.*
2. Connect one tube with the pump. Plug the siphon break into tubes, keep it higher than the water level of the reservoir, and set up the water tube by the universal holder.
3. Connect both of the DC pump and power adapter with the controller and then connect power
   Please set the sensor away from water outlet and direct light to avoid bubble interference or malfunctions.

Caution : Risk of Injury from Strong Magnets

Siphon break must be higher than the water level in the reservoir. Siphon break allows air in to break the siphon when the pump turns off. Water Out : Water d raps out of the hole are normal when the pump is on.

LED Indicator

lue LED

| Solid| Power on| N.A.
---|---|---|---
Circulating| Filling/Pumping| N.A.
Flashing with audible alerts| Pump connection failure| Check the connection between the pump and the

controller.

Flashing quickly for a

short time**

| The fail-safe sensor detects the water level changes.| 1. Clean the sensor.

2. Check the set-up of siphon

Alternating Blue& Orange LED*

| Flashing with audible alerts| QST alarm:

1.  Bubble interference

2. Empty reservoir

| 1. Clean the sensor or move it to an area away from microbubbles.

2.  Refill the reservoir.

Orange LED*

|

Flashing

| 72-hour non-filling reminder| 1. Clean the sensor.

2. Check if the pump functions properly.

• Please follow the instructions above to fix the issues and then unplug the power and plug it back in.
• For very small aquariums, the top sensor may be triggered after each top-off. This is normal and no action is required.

Specifications

1. Power Input: 100-240 VAC 50-60 Hz
2. DC Pump:
3. Head: 8.2 feet (250 cm)
4. Flow Rate: 74 gph (280 kph)
5. Max. Mounting Thickness: 1 /2 inch (12.7 mm)

Quick Security Technology

Smart ATO Duo G2 uses QST for real-time protection against any failure situation. The controller will give an audible and visual alert when it senses any other refilling time is 6 times longer than the first refilling time.* QST can detect the malfunction of the sensor or the controller, and the empty reservoir to avoid the pump running dry. For example, if the first refilling time is 10 sec, it will alert when any other refilling time is over 60 sec.
No security time control for the first refilling.

Touch Button & Square Dual Sensor

Limited Warranty

1. Limited warranty is provided by AUTOAQUA only if your AUTOAQUA Product (“Product”) was purchased from an authorized distributor or an authorized reseller.
2. All warranty repairs or replacements are performed by the authorized distributor or authorized reseller in the region where the Product was first shipped by AUTOAQUA.
3. The limited warranty is valid for a period of 1 year under proper installation and normal use from the date of the original purchase listed on the proof of purchase or sales receipt.
4. In the event of a limited warranty claim, proof of purchase or sales receipt (issued to the original purchaser) is required.

Place of Purchase

(Store name, phone, email, address)

Service

AUTOAQUA Technologies Co., Ltd. ?F-7.,N0.229,Fuxing 2nd Rd.,Zhubei City, Hsinchu County,Taiwan
E-mail: service@autoaqua.com.tw www.autoaqua.com.tw
Please go to the AUTOAQUA website to get the distributor information.
Purchase Date (Y/M/D).

Warranty Period

• One year from the purchase date

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>