Oterkin B0C8S9ZSCZ Magnetic for iPhone 13 Pro Case Clear Instruction Manual
- June 15, 2024
- Oterkin
Table of Contents
Oterkin B0C8S9ZSCZ Magnetic for iPhone 13 Pro Case Clear
Product Information
The Oterkin Screen Protector is a high-quality protective film designed for electronic devices such as smartphones and tablets. It offers excellent protection against scratches, dust, and fingerprint smudges, ensuring the longevity and clarity of your device’s screen.
Specifications
- Material: Premium PET
- Thickness: 0.3mm
- Hardness: 9H
- Transparency: 99%
- Compatibility: Suitable for most smartphones and tablets
Product Usage Instructions
Step 1: Prepare the Surface
- Clean the screen of your device using the provided cleaning cloth and dust removal sticker.
- Make sure there are no dust particles, fingerprints, or dirt on the surface.
Step 2: Align the Protector
- Hold the screen protector by the edges and align it with the screen of your device.
- Ensure that the cutouts for the camera, sensors, and buttons are properly aligned.
Step 3: Apply the Protector
- Gently peel off the backing film from the adhesive side of the screen protector.
- Be careful not to touch the adhesive surface.
- Align the protector with the screen and slowly lower it onto the surface, starting from one edge and gradually pressing it down towards the other edge.
Step 4: Remove Air Bubbles
- If you notice any air bubbles trapped under the screen protector, use a microfiber cloth or a card to push them towards the edges.
- Start from the center and move towards the edges to ensure a smooth and bubble-free installation.
Step 5: Final Touches
- Once the protector is applied, use the microfiber cloth to gently press out any remaining bubbles and ensure a secure adhesion.
- Clean the screen with the cloth to remove any fingerprints or smudges.
Screen Protector Installation Steps
- Place the Screen Protector, Phone, and cleaning Kit on a Flat Surface
- Open the cleaning kit and take out the tools inside.
- Open the alcohol cleaning packet.
- Use wet wipes to wipe the phone screen
- Take out a dry cloth
- Use the cleaning cloth to dry the screen.
- Remove the dust removal sticker
- Use the dust removal sticker to remove dust from the screen.
- Make sure the phone screen is in a dust-free and clean state.
- Tear off the protective film of the screen protector.
- Align the screen protector at the front lens position.
- After ensuring that the screen protector aligns with the phone screen, gently lower it.
- Lift the screen protector from the edges until the bubbles disappear.
- If there are bubbles on the edge of the phone screen
- Press hard on the edge of the screen with clean cloth to expel bubbles from the screen protector.
- Finally, after cleaning the screen, you will get a perfect phone screen.
Oterkin is committed to providing more consumers with better quality products and services. If you encounter any problems, please feel free to get in touch with us through Amazon.
Contact Way
Read User Manual Online (PDF format)
Loading......