MotoMotion SW419 Remote Control Instructions
- June 14, 2024
- MotoMotion
Table of Contents
MotoMotion SW419 Remote Control
Product Information
- Product Name: Remote Control
- Product Model No.: SW419
- FCC ID: 2BA76SW41MNT008
Environment Requirement
- Operation temperature : +10~ +40
- Storage temperature : 10~65
- Operating Humidity : 10%~80%RH non-condensing
- Storage Humidity : 10%~85%RH non-condensing
Product Usage Instructions
- Ensure the remote control is compatible with the device you intend to operate.
- Make sure the remote control is within the appropriate operating temperature range of +10~+40 degrees Celsius.
- Store the remote control in a temperature range of 10~65 degrees Celsius when not in use.
- Operate the remote control in a non-condensing humidity environment with an operating humidity range of 10%~80%RH.
- When not in use, store the remote control in a non-condensing humidity environment with a storage humidity range of 10%~85%RH.
- Ensure the remote control is powered by DC 3.7V li-ion batteries.
- Connect the remote control to a compatible control box for proper control functionality.
- If any problems or malfunctions occur, seek assistance from professional personnel for troubleshooting and repairs.
Additional Information
Note: The information provided above is for the SW419 model. Please refer to the respective user manual for SW417 for specific instructions and details.
- Product Name: Remote Control
- Product Model No.: SW417
- FCC ID: 2BA76SW41MNT008
Environment Requirement
- Operation temperature : +10~ +40
- Storage temperature : 10~65
- Operating Humidity : 10%~80%RH non-condensing
- Storage Humidity : 10%~85%RH non-condensing
SW419 Remote Control Instructions
Product Overview
- Product Name： Remote Control
- Product Model No.: SW419
- FCC ID : 2BA76SW41MNT008
Environment requirement
- Operation temperature : +10℃~ +40℃.
- Storage temperature : －10℃~65℃.
- Operating Humidity ：10%~80%RH，non‐condensing.
- Storage Humidity： 10%~ 85%RH，non‐condensing.
Directions for Operation
Matters needing attention
- The function will only work normally in proper working power conditions.
- Remote Control needs DC 3.7V powered by li‐ion batteries.
- The control box is needed for proper control.
- If problems are identified, they must be treated by professional personnel.
Additional attention for user
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
- For Intentional and unintentional radiators the manual shall caution the user and manufacturer that changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
SW417 Remote Control Instructions
Product Overview
- Product Name： Remote Control
- Product Model No.： SW417
- FCC ID : 2BA76SW41MNT008
Environment requirement
- Operation temperature : +10℃~ +40℃.
- Storage temperature : －10℃~65℃.
- Operating Humidity： 10%~80%RH，non-condensing.
- Storage Humidity ：10%~ 85%RH，non-condensing.
Directions for Operation
Matters needing attention
- The function will only work normally in proper working power conditions.
- Remote Control needs DC 3.7V powered by li-ion batteries.
- The control box is needed for proper control.
- If problems are identified, they must be treated by professional personnel.
Additional attention for user
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
- For Intentional and unintentional radiators the manual shall caution the user and manufacturer that changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>