amazon basics XD-4500 Submersible Water Sump Pump Instruction Manual
- June 15, 2024
- amazon basics
Table of Contents
Amazon Basics XD-4500 Submersible Water Sump Pump
If any problem. contact email:cndynas@cndynas.com Share your shopping feelings on Amazon to get free items. Before operating this appliance, please read this instruction manual completely and keep it handy for future reference!
INCLUDES
PARAMETERS
MAINTENANCE
- If the pump will be not used for the long term, please take the pump out of the water, let the pump work in the clean water for a moment, and then clean the parts of the pump and wipe it clean.
- If the temperature is below 0°C, please take the water pump from the water immediately and discharge the accumulation of water in the pump in case the pump is broken because of freezing.
USAGE
- Before using, take the pump and fix it to a suitable outlet, and then connect with the hose.
- The sucker has a fixed and cushioning effect, please fix the suckers on the wall. If fixing the pump with the rope, it is no need to fix the sucker.
- It also can use the right sticks, and nails to fix the pump by fixing the holes of the bottom plate.
- After fixing it firmly, you can connect to the appropriate power supply, and the pump start working.
CAUTION
- Before using the pump, please make sure the rated voltage marked on the nameplate and the voltage of actual use are consistent.
- When installing, removing, and cleaning the pump, you must unplug the power plug to ensure safety.
- If the pump has been a serious collision, please check the pump, if broken, please stop using it immediately.
- Not intended to be moved when plugged in or in operation.
- The supply cord can be replaced if the cord is damaged and the appliance has to be scrapped.
- Do not lift the pump by the power cord.
- Please make sure the pump working in clean water.
- Do not pump heated liquids with a temperature higher than 35°C.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>