amazon basics B07TK386MK Oscillating Pedestal Floor Fan Instruction Manual

: June 15, 2024
: amazon basics

Table of Contents

Contents
IMPORTANT SAFEGUARDS
Assembly
Operation
Cleaning and Maintenance
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

amazon basics B07TK386MK Oscillating Pedestal Floor Fan

amazon basics B07TK386MK Oscillating Pedestal Floor
Fan

IMPORTANT SAFEGUARDS

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following:

Ensure that the fan is switched off from the supply mains before removing the guard.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Intended Use

This product is intended for household use only. It is not intended for commercial use.
This product is intended to be used in dry indoor areas only.
No liability will be accepted for damages resulting from improper use or non-compliance with these instructions.

Before First Use

Check for transport damages.
Before connecting the product to the power supply, check that the power supply g. voltage and current rating corresponds with the power supply details shown on the product rating label.

Risk of suffocation! Keep any packaging materials away from children – these materials are a potential source of danger, e.g. suffocation.

Assembly

Step 1;

Remove the screws and washers from the base poles.
Assembly
Connect the base poles (C1) and (C2).

Step 2:

Connect the extension pole (B) with the base poles (C1) and (C2).
Secure the connection with the screws and washers.

Step 3:

Remove the fixing screw from the main body (A).
Place main body (A) onto the extension pole (B).
Secure the connection with the fixing screw.

Step 4:

Connect the rear guard (F) with the main unit (A). Align the rear guard’s holes with the main unit’s guide nodes .
Secure the rear guard (F) with the fixing ring (G).

Step 5:

Place the blade (D) on the shaft. Align the axle shaft pin with the groove on the rear side of the blade (D).
Secure the connection by turning the cap nut (H) anti-clockwise.

Step 6:

Remove the screw and nut from the front guard (E).
Place the front guard (E) onto the bottom hook of the rear guard (F).
Use the pin holes on top as guides to align both guards (E) and (F).

Step 7:

Secure both guards (E) and (F) with the screw and nut.
Close the locking brackets around ~he guards (E) and (F).

Tilt adjustment

To adjust the tilt, use the handle located on the rear guard (F) and pull upwards or downwards.
Tilt adjustment

Height adjustment

Loosen the height adjustment ring.
Adjust the height.
Tighten the height adjustment ring.

Operation

Switching on/off

Plug in the product to the electrical outlet.
Place the product on a flat and stable surface.
To switch on, press one of the speed buttons 1, 2 or 3.
To switch off, press the O button and unplug the product from the electrical outlet.

Setting the speed

Press the speed button 1, 2 or 3 to select the speed.

Button	Speed
1	Low
2	Medium
3	High

Setting the oscillation

The product features automatic oscillation for better airflow distribution.

To switch on the oscillation, push the oscillation knob down.
To switch off the oscillation, pull the oscillation knob up .

Cleaning and Maintenance

Risk of electric shock! To prevent electric shock, unplug before cleaning.

Risk of electric shock! During cleaning do not immerse the electrical parts of the product in water or other liquids. Never hold the product under running water.

Cleaning

To clean, wipe with a soft, slightly moist cloth.
Regularly remove dust and dirt from the guards using a vacuum cleaner.
Dry the product after cleaning.
Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.

Maintenance

Store in a cool and dry place away from children and pets, ideally in original packaging.
Avoid any vibrations and shocks.

Disposal

The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimise the impact of electrical and electronic goods on the environment, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed separately from ordinary household wastes at its end of life. Be aware that this is your responsibility to dispose of electronic equipment at recycling centers in order to conserve natural resources. Each country should have its collection centers for electrical and electronic equipment recycling. For information about your recycling drop off area, please contact your related electrical and electronic equipment waste management authority, your local city office, or your household waste disposal service.

Specifications

Rated power: 220-240 V-, 50 Hz
Power consumption: 40W
Tilting angle range: 24°
Oscillation range: 80°
Protection class: Class II
Net weight: 3 kg
Dimensions (W x H x 0): 67.5x 121 x67.5cms

Feedback and Help

Love it? Hate it? Let us know with a customer review.

Amazon Basics is committed to delivering customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.

amazon.co.uk/review/review-your-purchases#
amazon.co.uk/gp/help/customer/contact- us

Logo