amazon basics B081TD1Y3X Aluminum Type C Docking Instruction Manual

amazon basics B081TD1Y3X Aluminum Type C Docking

Aluminum Type-C Docking

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following:

• Do not bend or kink the USB cable.
• Observe the safety instructions of any other devices connected to the product.

SAVE THESE INSTRUCTIONS

Explanation of Symbols

This symbol stands for “Conformité Européenne”, which means “Conformity with EU directives”. With the CE marking the manufacturer confirms that this product complies with applicable European directives and regulations.
Direct current (DC).

Intended Use

• This product is intended for household use only. It is not intended for commercial use.
• This product is intended to be use,j in dry indoor areas only.

Product Description

• A USB Type-A 3.0 ports with 1.5 A Charging
• B 3.5 mm audio socket (microphone/headphone)
• C USB Type-C port to the host computer
• D USB Type C port for PD 3.0/data
• E DC input socket
• F DisplayPort
• G HDMI port
• H VGA 15-pin socket
• I RJ45 Ethernet socket
• J USB Type-A 3.0 ports
• K 3.5 mm audio socket (speaker)
• L USB Type-C male-to-male cable

Before First Use

• Check the product for transport dam3ges.
• Remove all the packing materials.

DANGER
Risk of suffocation! Keep any packaging materials away from children – these materials are a potential source of danger, e.g. suffocation.

Connections

Connecting the power adapter(s)

• This product has two power sour:e inputs. The first source is via USB-C port for Power Delivery (PD) 3.0 ID). The alternate source is the DC input socket (E). It requires at least one for the product to work properly.
• Connect the USB Type-C port of 3 PD power adapter (not included) to the USB Type-C port of (D) of the product; or connect the DC jack of a DC power adapter (not included) to the DC input socket (E) of the product.
• Connect the power adapter(s) to socket outlet(s).

NOTICE

• For the DC input socket, use a 20 V (75 W or above) power adapter.
• This product supports 100 W Power Delivery charging for the host computer and the product’s pow-,r requirements (15 W).
• With both power sources connected to this product, if the active power source is unplugged, the alternate one will power the docking automatically. The connected devices get disconnected for a few seconds and then reconnect automatically.
• If the product’s power relies solely on the host computer, its USB-A and USB-C ports cannot work.
• This product works with host computers that support the DisplayPort Alt Mode (DP Alt Mode) by way of the USB Type-C connector. The host computer interfaces via the DisplayPort (F), VGA 15-pin socket (H), HDMI port (G) ports of this product to the corresponding displays.

NOTICE
Risk of data loss! Do not disconnect from a computer or USB device during data transfer. Doing so may corrupt your data or damage connected devices.

NOTICE

• A USB 3.0 cable is required for USB 3.0 connections.
• The total output of the 4 USB-A,) and A) and 1 USB-C (C) ports is 12W (5 V 2.4 A). The USB port with 1.5 A Charging (A) can deliver up to a maximum of 7.5 W (5 V 1.5 A).
• This product is backward compatible and is designed to work with older USB versions including USB 2.0 and USB 1.1.

Video Connection

This product supports triple video outputs simultaneously of a maximum resolution of dual 1080 p/60 Hz, or triple 720 p/60 Hz under the Multi­Stream Transport (MST) mode: DisplayPort. HDMl and VGA.

NOTICE

• To set up the multiple display mode and select monitor resolutions, go to the display setting of the relevant Operating System. The set-up procedures vary with the OS.
• If the host computers run on a Ma( OS that does not support the MST mode, connect only 1 monitor at a time.
• When using multiple video outputs, 1 monitor may not display properly if the resolution of the other monitor has been set so high that it uses up the total video bandwidth of 10.8 G. In that case, lower this resolution until the problem is resolved.
• The 0isplayPort (F) supports OP++ which enables the connection from this port to an HDMI display via passive DP to HDMI cable.

Ethernet connection

• Connect an Ethernet device to the R..145 Ethernet socket (I).
• Set the IP address manually if required.

Cleaning and Storage

NOTICE During cleaning do not immerse the product in water or other liquids. Never hold the product under running water.

Cleaning

To clean the product, wipe with a soft, slightly moist cloth.

Never use corrosive detergents, wire arushes, abrasive scourers, metal or sharp utensils to clean the product.

Storage
Store the product in its original packaging in a dry area. Keep away from children and pets.

FCC – Supplier’s Declaration of Conformity

FCC Compliance Statement

1. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
2. this device may not cause harmful interference, and
3. this device must accept any interference received, including interference that may cause undesired operation.
4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Interference Statement
This equipment has been tested and fund to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

Canada IC Notice

• This Class B digital apparatus complies with Canadian CAN ICES-3(B) / NMB-3(B) standard.

Disposal
The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimise the impact of electrical and electronic goods on the environment, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed separately from ordinary household wastes at its end of life. Be aware that this is your responsibility to dispose of electronic equipment at recycling centers in order to conserve natural resources. Each country should have its collection centers for electrical and electronic equipment recycling.
For information about your recycling drop off area, please contact your related electrical and electronic equipment waste management authority, your local city office, or your household waste disposal service.

Specifications

Feedback and Help

Love it? Hate it? Let us know with a customer review.

Amazon Basics is committed to delivering: customer-driven products that live up to your high standards. We encourage you to write a review sharing your experiences with the product.

• US: amazon.com/review/review-your-purchases#
• UK: amazon.co.uk/review/review-your-purchases#
• US: amazon.com/gp/help/customer/contact-us
• UK: amazon.co.uk/gp/help/customer/contact-us

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>