PHILIPS 8500 Series Integrated Multi Angle Board User Manual
- June 15, 2024
- Philips
Table of Contents
8500 series
User manual
8500 Series Integrated Multi Angle Board
Figure 6: Insert the board into the
pole slot then lock the clip to secure the board.
Figure 7: Insert the board clips into the slots till you hear a click
sound.
Figure 1: Unlock the 2 nd clip from the top.
Figure 2: Push the board down to horizontal position.
Figure 3: Lock the clip.
The appliance is suitable to be used
with tap water. However, if you live in an area with hard water, we recommend
that you mix an equal amount of tap water with distilled or demineralized
water. This will prevent fast scale build up and prolong the lifetime of the
appliance.
Press steam trigger for 10 seconds
before ironing to prevent water stains on garment.
Figure 2: Press steam trigger twice quickly for continuous steam.
If you want to stop continuous steam, press steam trigger once. After 8
minutes of continuous steam, steam will stop automatically, this is
normal.
Figure 2: It switches off automatically after blinking for 10
minutes.
PHILIPS and the Philips Shield Emblem are registered trademarks of
Koninklijke Philips N.V. and are used under license.
This product has been manufactured by and is sold under the responsibility of
Versuni Holding B.V., and Versuni Holding B.V. is the warrantor in relation to
this product.
642001002380 (25/09/2023)
2023 © Versuni Holding B.V.
www.philips.com/welcome