QiYuan 5-In-1 Wireless Magnetic Charging and Mood Lamp User Manual
- June 4, 2024
- QiYuan
Table of Contents
QiYuan 5-In-1 Wireless Magnetic Charging and Mood Lamp
Model: SMC-300
Illustrate
- Make sure this charger is connected to a power source before using this charger.
- Put the phone/watch/headset on the charger, the LED indicator lights up, the charger will enter the charging state.
- Remove the phone/watch/headset and the product is in standby mode.
- Please adjust the brightness of the night light according to your needs to create a better atmosphere.
Attention
- Do not use the charger in a wet environment.
- Do not use the charger in a high-temperature environment.
- Do not place metal objects (such as keys, coins, etc) on the charger to avoid heat damage to the charger.
- Please do not place magnetic materials (such as credit cards, ID cards, etc.) on the to avoid invalidation of the card.
- Do not try to disassemble the charger by yourself. Disassembling the charger may damage it.
OVERVIEW
| ① | USB-C Input Port | PD 30W 9V3A |
|---|---|---|
| ② | LED Indicator | 1. When the Magnetically attracting wireless mobile |
phone/watch/USB C input/USB A output port is charging or powered on, the white light is always on
2. The red light is always on when the headset is charging， FOD：Red light flashing
③| Magnetic Wireless Charging for Mobile phone| 10W （9V 1.1A）
④| Wireless Charging for Watch| 1.5W （5V 0.3A）
⑤| Wireless Charging for Earphone| 3W （5V 0.6A）
⑥| USB-A Output Port| 10W （5V 2A）, Wireless Charging X
⑦| Touch Switch for Night Light| Brightness Gear: “⑧” Small-Medium-Large
Wireless Chaging| Max 14.5W (3,4,5)
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Entrusted Manufacturer: Shenzhen Fangmo Technology Co., Ltd.
Address: Fuhai District 3 Fuyong community，Shenzhen， Guangdong
Contact us：qiyuanpower@hotmail.com
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>