FOLEY X12 Open Ear Headphone For Kids User Guide
- June 14, 2024
- FOLEY
Table of Contents
X12 Open Ear Headphone For Kids
User Guide
X12 Open Ear Headphone For Kids
Illustration of the keys
List of accessories
- Ear protection Bluetooth headset
- Magnetic charging data cable
- Instruction manual
Operating instructions
| serial number | function | How-to | state |
|---|---|---|---|
| 1 | Boot | Press and hold the “+” button for 3 seconds in shutdown state | The |
blue light is on,
and the voice prompt is turned on
2| Pairing status| ———-| Red and blue lights flash alternately
3| The connection is successful| ———-| The lights go out
4| Bluetooth is
disconnected| Turn off device Bluetooth or move out of the range, Bluetooth
will
be disconnected| Red and blue lights
flashing alternately, voice Prompt to disconnect
5| Shutdown| Press and hold the “+” button for 3 seconds during the power-on
state| The lights are off and the voice prompt is turned off
6| Automatic reconnect| The machine automatically returns to the last
connection of
Bluetooth devices|
| Disconnect and shut down| No connection for 5 minutes, automatic shutdown|
The lights are off and the voice prompt is turned off
8| Clear the pairing record| When the device is not connected to the power-on,
press and hold the volume-Key 55 Clear pairing record| Knock knock
9| Volume+| Click the “+” key to increase the volume by one stop| When the
volume is at its highest, the drip prompts
10| Volume-| Click the “-” key and the volume is reduced by one stop| ———-
11| Pause/Play| In the music playback status, double-tap the + keys to switch
Pause/Play| ———-
Serial number| Function| How-to| State
---|---|---|---
13| Next song| Long press 1S to lift the next song| ———-
14| Reject the call| Press the “+- button fort second for incoming calls| ———-
15| There is telephone access| You have incomistry “+” Doodle….| ———-
16| Answer the phone| When a call comes, click the ‘+” key| The lights go out
17| Hang up| While on a call, press and hold the ” +” button for 1 second|
———-
18| Charging| Link the Type-C charging cable to
enter the charging mode, lt automatically shuts down when charging| The red
light is on
19| Charging complete| The battery is fully charged and charged as soon as it
is charged| The blue light stays on
20| Low battery alarm| Notification tone Low battery Please charge| Every 5
seconds
21| Intelligent voice mode| In the Bluetooth connection status, press and hold
the – button for 1 second, Raise your hand to enter voice mode| ———-
22| TF memory mode| In the power-on state, double-click the – key to switch
Memory/Bluetooth mode| ———-
23| Memory download| Connect the headphones to the computer via a magnetic
cable Eject the USB flash drive| ———-
Feature tips
Blue tooth pairing: In the shutdown state, press and hold the + button for 3
seconds to turn on, the indicator light enters the red and blue light flashing
state, enter at this time Enter the pairing status, turn on the Bluetooth
(mobile phone/computer/tablet) ovn the device, search for the device name X12
Pro , and click Set Prepare X12 Pro’ pairing connection, and it can be used
after the connection is successful.
Bluetooth/MP3 mode switching: double-lick the – key to switch Bluetooth and
memory mode (boot default Bluetooth mode)
Two music mode switching: long press the volume – key to switch the volume
mode, boot the default child mode low volume)
Product specifications
| Model | X12pro |
|---|---|
| BT version | 5.3 |
| Standby time | 10 days |
| Charging time | 2 hours |
| Music playback time | 10 hours |
| Protocols: A2DP, AVRCP, HSP, HFP Waterproof level: | IPXS |
| Horn impedance | 32 ohms |
| --- | --- |
| The microphone sensitivity | 38d8 |
| Product weight | about 29g |
| Connection distance | 10 meters |
| Battery | 160mA |
| Music formats: | MP3, WMA, WAV, APE, FLA€ |
Troubleshooting
Unable to power on
Check if the headphones are fully charged, if the keys are not misoperated,
and if charging is active simultaneously.
Unable to connect via Bluetooth
If the headphone indicator is alternating between red and blue flashing or if
it’s turned off or flashing blue, it indicates that the headphones are not in
pairing mode. In this case, please ensure that no other devices are connected,
and disconnect any currently connected devices.”
Unable to connect back
Check if the front end (e.g., Bluetooth phone) is powered on properly.
The headphone volume is low
Adjust the earphone volume, verify the correct wearing style, and ensure that
the headphone is not set to a children’s volume mode.
Customer support
Thank you for choosing our headphones.
We are a professional factory specializing in headphones and are the supplier
of many big brand owners. The Kids’ Open-ear Headphones are one of the mature
products in our factory.
We stand by our commitment to provide a lifetime of after-sales service to our
valued customers Your satisfaction is our top priority. If you have any
inquiries about the product or require assistance in its usage, please don’t
hesitate to reach out to us.
You can contact us via Amazon chat or email, and our dedicated support team
will promptly address your concerns and ensure your complete satisfaction.
Email: support@foley-us.com
We look forward to assisting you with any needs you may have.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>