amazon basics B072MF4SHR Aluminum Heavy Duty Steel Wire Double Post Shelf User Guide
- June 15, 2024
- amazon basics
Table of Contents
amazon basics B072MF4SHR Aluminum Heavy Duty Steel Wire Double Post Shelf
Safety and Compliance
Please read and understand this entire manual before using the product.
Tools Required
CAUTION
- Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure.
- Evenly distribute the weight on each shelf, and keep the heaviest loads on the bottom shelf.
- Use only on flat, level, and hard surfaces capable of supporting the shelving and any items placed on it. Remember to only use the shelf on level ground with evenly distributed weight.
- Do not store flammable liquids in the unit unless they are secured in an approved container.
- Keep bystanders out of the area during assembly.
- This product is not a toy. Do not allow children to play with, on, or near the unit.
WARNING
- Do not stand on, step on, or alter this unit for anything outside the designed function of storage.
- Use care when handling and assembling metal parts.
- The metal may have sharp edges or corners. The use of protective gloves is recommended.
- Always remember to use proper lifting techniques when moving the boxed or assembled unit.
Preparation
Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list. If any part is missing or damaged, do not attempt to assemble the product. It is recommended that this product be assembled on a clean, soft surface, such as a piece of cardboard. The assembling task can be performed by one person but the availability of a second person will make the task simpler.
Troubleshooting
Specifications
Installation
NOTICE
Do not omit this step, which could protect your floor from scratches.
NOTICE
Make sure all the rivets are fully seated in the post slots. You may want to
use a rubber mallet (not included) to help push the rivets into the post
slots. This annient the caterin thinner.
NOTICE
Each of the beams A and braces level should be at the same height. B on the
same.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>