Yoton YB04 Baby Monitor with Camera and Audio User Manual
- June 14, 2024
- Yoton
Table of Contents
- Package Contents
- Product Introduction
- Installation Introduction’
- Product Function Introduction
- Product menu introduction
- Q&A
- 1. Why does the appliance produce a high-pitched noise? The units may be
- 2. Why don't | hear a sound/Why can't | hear my baby cry?
- 3. Why does the parent unit react too quickly to other sounds? The baby
- 4. Why is the connection lost every now and then? Why are there sound
- Warranty
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Yoton YB04 Baby Monitor with Camera and Audio User Manual
Package Contents
- One Parent Unit
- One Baby Unit
- Two Power Adapters
- One User Manual
Product Introduction
Overview of your Parent Unit
- LCD Display
- Vox
- Menu Button
- OK Button
- Volume(+) Button | Up Button
- Volume(-) Button | Down Button
- Brightness(-) | Left Button
- Brightness (+) | Right Button
- Music Play Button
- Push to Talk Button
- Switch Button
- Speaker
- Bracket
Overview of your Baby Unit
- Camera Lens
- Light Sensor
- Infrared LED
- Microphone
- Speaker
- Pairing Button
- Type-C Power Interface
- Temperature Sensor
Installation Introduction’
Baby unit installation and connection
- Connect the baby unit with the parent unit:
- Mount the baby unit on the wall.
Use the template below to mark the wall at the correct location to drill holes for the wall mounting screws (not provided).The two grooves at the bottom of the baby unit and the screws that have been fixed on the wall are used for hanging and fixing.
Charging and Power On/Off
-
Baby unit power supply :
Use Baby unit with the power supply continuously powered on.
Parent unit power supply
When the parent unities fully charged, it can be unplugged and used. -
Power On/Off
Press and hold the power button at least 3 seconds to turn on the parent unit, then two units will be connected automatically.
Product Function Introduction
LCD display icon introduction
- Signal strength indicator
- VOX sensitivity
- Alarm clock
- Lullabies
- temperature of the baby’s room
- Battery indicator
Night vision function
The baby unit has 1 high-intensity infrared LED for picking up clear images
in the darkness.
Music player
Press this button-“¢’@ ” 1 second will turn on the music player and play
lullabies in turn, press it for 1 second again to switch to the next lullaby.
4. Intercom function Long press the button- & on the parent unit to talk to
your baby.
Volume adjustment
The volume has 8 levels. Press this button A\ (+)” and this button “ W (-) ”
to adjust the volume as your needs.
Turn off the Parent Unit
Press and hold the power button at least 3 seconds, the parent unit will be
turned off.
VOX Mode setting
Press this button® := ” turn on the VOX mode.
VOX sensitivity setting
Menu – VOX Mode – High/Medium/Low/Off
Product menu introduction
Settings
a. LCD backlight brightness adjustment
- Press this button “A” Brightness. to adjust
b. Volume adjustment
- Press this button “/A” “N/” to adjust volume,
Q&A
1. Why does the appliance produce a high-pitched noise? The units may be
too close to each other.
Make sure the parent unit and the baby unit are at least 3.5 feet/1 meter away from each other. The volume of the parent unit may be set too high. Decrease the volume of the parent unit.
2. Why don't | hear a sound/Why can't | hear my baby cry?
(1) The volume of the parent unit may be set too low or may be switched off. Increase the volume of the parent unit. (2) The baby unit and parent unit may be out of range of each other. Reduce the distance between the units.
3. Why does the parent unit react too quickly to other sounds? The baby
unit also picks up other sounds than those of your baby.
The baby unit closer to the baby (but observe the minimum distance of 3.5 feet/1 meter.
4. Why is the connection lost every now and then? Why are there sound
interruptions?
- The baby unit and the parent unit are probably close to the outer limits of the operating range. Try a different location or decrease the distance between the units. Please note that it takes about 30 seconds each time before a connection between the units is established. (2) You may have placed the parent unit next to a transmitter or other appliance, such as other wireless telephone or 2.4GHz baby monitor. Move the parent unit away from the other appliances until the connection is re-established
HOW TO ACTIVATE A 3 YEAR WARRANTY?
Email us your order number
Email Address: bm.support@yoton.co
Warranty
All YOTON Baby Monitor products come with a limited warranty of 24 months from
the date of purchase. And we have professional customer service team for your
support as soon as we can.
If you have any questions or confusions about our product or warranty, please
feel free to contact usWe will do our best to help you solve the problem until
you are satisfied.
YOTON Customer After-Sales Service Mailbox:
bm.support@yoton.co
Complaint Mailbox:
US: bm.support.us@yoton.co
E£U: bm.support.eu@yoton.co
JP: bm.support@yoton.co
Attention
Thank you for purchasing YOTON Video Baby Monitor YBO4. Before you use the device, please read this User Manual carefully.
- This product should be assembled by adults.
- Keep small parts away from children when assembling.
- This product is not a toy, do not allow children to play with it as a toy.
- This baby monitor is not a substitute for responsible adult supervision.
- Do not place the baby monitor cables i the cot or with the baby arm’s reach (at least 1 meter away).
- Do not use the baby monitor near water or a heat source.
- Do not touch the power plug with sharp or metal objects.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>