DBPOWER RD-823 Mini LCD Video Projector User Manual

RD-823 MINI LCD VIDEO PROJECTOR
USER MANUAL

Power Your Life

FCC STATEMENT

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsi- ble for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna,
• Reorient or relocate the receiving antenna.
• Reorient or relocate the receiving antenna,
• Consult the dealer or an experienced radio/TV technician for help important announcement Important

RADIATION EXPOSURE STATEMENT

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

NOTICE

1. Not recommended for PPTs, Word, Excel, or business presentations.
2. To connect the DBPOWER mini projector with a tablet or smartphone, please use Wi-Fi screen mirroring feature or use external HDMI adaptor. For HDMiI adaptor connection, Android phones need to support MHL and an MHL to HDMI cable is required, iPhone & iPad need a Lightning to HDMI cable adaptor.
3. To connect the mini projector to PCs or laptops, please adjust the PC/laptop display resolution to 1280720 for best clarity.
4. Please note that it is only suitable for use in dark rooms.
5. Dolby is not supported. Please turn off Dolby digital in your device.

ACCESSORY LIST

• 1x AV signal cable
• 1x Remote control (battery not included)
• 1x HDMI cable
• 1x Power Cable
• 1x User manual
• 1x Warranty card

SAFETY NOTICE

1. Please read the user manual carefully before using the projector.
2. Please use standard power cord with ground wire, to ensure stable power supply.
3. Please use the same power voltage as marked on the projector.
4. Please do not disassemble the projector by yourself, otherwise the warranty will be void.
5. Please do not look into the lens when the projector is working, otherwise it may hurt your eyes.
6. Please do not cover the projector ventilation holes with any material.
7. Please keep the projector away from water or any other liquid as it is not waterproof.
8. Please don’t put the projector in wet or moist conditions to prevent electric shock.
9. Please turn off and unplug from the power supply if not using the projector for a long time.
10. Please use the original packing foam or other anti-shock material when relocating the projector.
11. Please contact MOOKA customer support if you encounter any problem with the projector.
12. This mini projector comes with a full 12-month warranty.
13. Please contact us if you want to know more information about the warranty. (Warranty service does not include the frame, manual, packing and subjective ideas about the video, sound or image aspects)

PROJECTOR OVERVIEW

1. Focusing

2. Keystone Correction

3. Power Indicator:
   Standby: red
   Power On: blue

4. Return

5. Arrow Keys

6. 0K Key

7. Power Key

PROJECTOR OVERVIEW

REMOTE CONTROL

Caution

Do not submerge the remote control in water.
Do not put the remote control near fire or in wet/hot places.
Do not use old and new batteries together in the remote control.
Please take the batteries out if not using the remote control for along time to avoid battery leakage.
Please point the remote control at the IR receiver.

USER MANUAL

4.1 Connecting the projector to power
411 Connect the power cable to the projector.

412 The projector will display an indicator light when connected to power.

4.2 Power ON/OFF
Press the “ ” button on the projector or on the remote control to power on.

4.3 Multimedia boot screen
After 5-10 seconds, the multimedia screen will be displayed.

DISPLAY SOLUTION

4.4 Focus & keystone correction
4.4 Image focusing
Make sure the projector is horizontal to the projector screen and adjust the focus by turning the focus ring.
You can display video or the menu to check adjustment.

4.4.2 Keystone correction
The projector uses an optical keystone correction function, so the image can be adjusted as below:

However, this projector does not have a horizontal keystone correction function. The projector must be placed horizontally to the projection screen. Ifyou encounter this problem, itis probably because the projector has not been placed horizontally tothe projection screen, or the projection screen is not vertically positioned.
Solution: Adjust the projector’s position so that it is horizontal to the screen.

CONNECTIONS

5.1 Connections

Connect multiple devices and applications.

5.2 Playing media from a USB flash
5.2 Insert the USB flash into the USB slot.

5.2.2 Choose U Disk from the HOME screen

Supported multimedia formats

TS /MPG / M2TS / F4V / DAT
Text file| TXT

523 Choose the content which you need to display: Video/music/photos/text.

524 Choose the file you want to display. Press“ OK” .to display .

5.3 AV video connection
Use a 3-in-1 AV cable to connect to the projector as shown below. Once connected, select the AV signal source.

5.4 HDMI connection
5.4.1 Use the HDMI slot to connect computers and HDMI compatible devices. Once connected, select the HDMI signal source.

5.53.5mm audio connection
551 Use the 35mm audio jack to connect headphones and speaker equipment.
Note: This projector does not support Dolby sound.

5.6 Other connection
USB output 5V for mobile table power supply.

MENU SETTINGS

6.1 Setting
Press the “Menu ” key or select ” Setting ” on HOME screen to enter the main menu, then press “ “to enter each sub-menu.
Press ” ” to select the sub-menu, then adjust the parameters per your needs, and press the “OK” key to confirm.

6.2 Sub-menu functions
6.2.1 PICTURE: Picture Mode, Color Temperature , Aspect Ratio, Noise Reduction, Reduce Display Size , Projection Direction.
6.2.2 SOUND: Sound Mode, Balance , Surround Sound.
6.2.3 TIME: Sleep Timer.
6.2.4 OPTION: OSD Language , Restore Factory Default, Color Range , Sostware Upadate(USB).

SCREEN MIRRORING

Step 1: Select Screen Mirroring in the HOME screen.
Step 2: Press the OK key to enter the interface.
Step 3: After entering into the interface, select the function you need.
Note: To return to HOME screen from Screen Mirroring interface, press the “Home” key on remote control.

7.1 Android Screen
Android Screen has two connection methods:
7.1.1 Method 1: Wireless Connection (Recommeded)
Step 1: Select Android Screen in the Syncscreen interface
Step2: Turn on the WLAN of Android device
Step 3: Choose the screen mirroring function on the Android device, search for the device name of the projector and click to connect, and wait a few seconds, then the mirroring will be successful.
Note: Different Android device have different positions and names for the screen mirroing function, please refer to the manual of the Android device.

Some Android devices may not support screen mirroring due to the compatibility.

7.1.2 Method 2: Wired Connection
Step1: Select Android Screen in the Syncscreen interface
Step 2: Connect your Android device to the projector OUTSV port with ORIGINAL USB cable
Step 3: For the first time, your Android device will pop up below *NeatCast- Screen-Mirror ” window, select “VIEW” to download and install the “NeatCast” APP.

https://media.toptechdeveloper.com:2300/file/Ali/apkIneatcast.apk

Step 4: Your Android device will pop up below “NeatCast” window, slelect oK

Step 5: When your Android device pop up the “Privacy notice” window, select “START NOW” to start the screen mirroring. Some Android devices may only transfer the display without audio due to the protocol restrictions,

7.210S SCREEN
iOS Screen has three connection methods:
7.2.1 Method 1: Wireless connection with Wi router (Recommeded)
Step 1: Connect your projector to a Wi-Fi router (Refer to Wi-Fi connection method on page 25)
Step 2: Connect your iOS device to the same Wi-Fi router.
Step 3: Turn on Screen Mirroring on your I0S device, select the device name of the projector. 7.2.2 Method 2: Wireless connection without Wi-Fi router
Step 1: Projector doesn’t need to connect Wi-Fi router.
Step2: Turn on Wi-Fi on your iOS device and search for the network name of the projector, for example: DBPOWER_ OBIF, select it and enter the password “12345678″, then your iOS device will connect to the projector.
Step3: Turn on Screen Mirroring on your iOS device, select the device name of the projector.

7.2.3 Method 3: Wired connection
Enter iOS Screen, connect your iOS device to the projector OUTSV port with ORIGINAL USB cable . Your i0S device will receive a trust prompt, confirm “trust’, then the screen mirroring will start.
Note : If your iOS device doesn’t receive a trust prompt after connect to the projector, please use the original iOS device cable to try again.

SYNCSCREEN SETTING

Step 1: Select SyncScreen Setting from syncscreen.
Step 2: Choose the setting you want.
The settings include three functions: WIFI / System Upgrade /More Setting.
WIFI: Search and Cormect WiFi.
System Upgrade: OTA upgrade / USB upgrade.
More Setting: System Reset / Mirror Mode / Airplay Mode / Language.

WIFI CONNECTION

Step 1: Select WIFI and press the OK key to enter the next interface.
Step 2: Select the Wi-Fi that you want to connect from the Wi-Fi list.
Step 3: Enter the correct password through the virtual keyboard.
Select the Wi-Fi that has been connected, press the OK key, and three options will pop up: Disconnect: Disconnect the Wi-Fi connection this time, but it will be automatically connected after restarting Forget: Forget the password. After restarting, it will not automatically connect.
The password must be entered again for re-connection.
Cancel: Exit the menu.

MORE SETTING

Step 1: Select More Setting, press OK key to enter the interface.
Step 2: Choose the setting you want.
System Reset: Click Yes s to confirm the restoration, No is to exit the selection. Mirror Mode: Smooth / Standard / Quick.

1. Smooth Mode: Requires higher network to optimize the effect.
   of playing video, and caches the video to ensure smooth pictures during playback.

2. Standard Mode: Reduces the cache and delay of the mirroring.

3. Quick Mode: No video caching function. When the network environment is poor, the clarity of the mirroring will be lower to ensure smooth playback and reduce delay.
   Airplay Mode: Can set the channels for 1, 6 and 11 routers. When the network is poor, you can set other channels to avoid the jam and delay.

PROJECTOR INSTALLATION

7.1 Please refer to the following diagram for mounting the projector on a ceiling.
Do not place the projector near heat sources to prevent the projector from overheating.

When ceiling mounting the projector, please ensure screws of a suitable quality are used, and that screw depth is deep enough to prevent the projector from falling.

TECHNOLOGY FEATURES

81 Basic parameters

Imaging Technology| LCD| Projection Color Number| 16.7M color by 8 bit R.G.E signal input
---|---|---|---
Resolution| 1280×720 RGB| Keystone| Manual Correction ±15
Highest Resolution| 19201080| Power Voltage| 100V-240V 50/60Hz
Light| LED| Integrated watt| SOW
Life Span| 50,000 hrs| Input| USB/HDMI/AV
Lens| Multichip Coated| Output| Earphonel/OUT 5V(5V-15A)
Operation Mode| Lens (F=125) Manual Operation| Speaker peaker
3W|
System support| Support multi-media
Language support| Support 23 Language
Throw Distance| 1.5-3.7M| Unit size| 21016784mm
Screen Size| 50-120 Inches| Projector Ratio| 1.
Aspect Ratio| 4:3/16:9| New Weight| 1.05KG

8.2 Projection distance and screen size

FCC ID: 2AK43RD-828
Made in China

m.me/DbpowerOnline
1-855-888-5533
support@dbpowershop.com
www.dbpowershop.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>