EKKO EB12E Electric Stacker Instruction Manual
- May 15, 2024
- EKKO
Table of Contents
EKKO EB12E Electric Stacker
Body system
Frame system
Frame assembly
| No. | Code | Name | specification | Qty. | Notes |
|---|---|---|---|---|---|
| 1 | CLJ1030.01.02 | Operating handle assembly | 1 | ||
| 2 | GB/T 70.1-2000 | Hexagon socket head cap screws | M8×35 | 6 | |
| 3 | GB/T 93-1987 | Elastic washer | 8×2.1 | 27 | |
| 4 | CLJ1030.01.04 | Handle base welded | 1 | ||
| 5 | GB/T 95-2002 | Flat washer | 8×1.6 | 21 | |
| 6 | GB/T 70.1-2000 | Hexagon socket head cap screws | M8×25 | 19 | |
| 7 | GB/T 70.1-2000 | Hexagon socket head cap screws | M10×16 | 2 | |
| 8 | GB/T 93-1987 | Elastic washer | 10×2.6 | 3 | |
| 9 | GB/T 276-94 | Deep groove ball bearing | 6010 | 1 | |
| 10 | GB/T 297-94 | Tapered roller bearings | 30212 | 1 | |
| 11 | ZD11265 | Horizontal drive | 1 | 0.75KW24V | |
| 12 | CL10.5.5k | Steering wheel | 1 | ||
| 13 | GB/T 95-2002 | Flat washer | 12×2.5 | 4 | |
| 14 | GB/T 93-1987 | Elastic washer | 12×3.1 | 4 | |
| 15 | GB/T 70.1-2000 | Hexagon socket head cap screws | M12×40 | 4 | |
| 16 | CL12JY-01.4 | Backing block | 2 | ||
| 17 | GB/T 70.1-2000 | Hexagon socket head cap screws | M8×16 | 2 | |
| 18 | CL12JY-01.5 | Clamp plate | 2 | ||
| 19 | GB/T 41-2000 | Hexagon nut | M16 | 4 | |
| 20 | GB/T 70.1-2000 | Hexagon socket head cap screws | M16×50 | 4 | |
| 21 | CL12JY-01.3 | Screw welding | 2 | ||
| 22 | GB/T 93-1987 | Elastic washer | 20×5 | 4 | |
| 23 | GB/T 5783-2000 | Hexagon head bolt with full thread | M20×65 | 4 | |
| 24 | CL12JY-01.01 | Frame welding | 1 | ||
| 25 | GB/T 879.1-2000 | Elastic cylindrical pin | 5×35 | 8 | |
| 26 | DFL25.1-14D | Chain lever | 4 | ||
| 27 | SL20.1-9 | Washer | 8 | ||
| 28 | GB/T 276-94 | Deep groove ball bearing | 6204 | 8 | |
| 29 | CL10-4H | Front axle（2） | 4 | ||
| 30 | CL10-5 | trundle | 4 | ||
| 31 | CL12JY-01.2 | Welded leg parts | 2 | One piece for each side |
Cover assembly
cover assembly
| No. | Code | Name | Specification | Qty. | Notes |
|---|---|---|---|---|---|
| 1 | GB/T 818-2000 | Cross recessed pan head screws | M6×16 | 6 | |
| 2 | SPN10.0-6 | Shield clamp | 6 | ||
| 3 | SPN1016.0-4 | Shield | 1 | ||
| 4 | GB/T 70.3-2000 | Hex socket countersunk head screw | M6×16 | 2 | |
| 5 | CLJ1030.06-2 | Upper face shield | 1 | ||
| 6 | CLJ1030.06-4 | Handle base cover | 1 | ||
| 7 | CLJ1030.06-3 | Lower face shield | 1 |
Universal wheel assembly
Universal wheel assembly
| No. | Code | Name | Specification | Qty. | Notes |
|---|---|---|---|---|---|
| 1 | CL10.5.5.1G | Flange welded parts | 2 | ||
| 2 | GB/T 91-2000 | Cotter pin | Φ3.2×45 | 2 | |
| 3 | CL10.5.5-2 | Dust ring | 2 | ||
| 4 | JB/T 7940.1-1995 | Straight through forced filling oil cup | M6 | 2 | |
| 5 | GB/T 301-1995 | Thrust ball bearing | 51111 | 2 | |
| 6 | GB/T 276-94 | Deep groove ball bearing | 6205-2Z | 2 | |
| 7 | CL10.5.5-3 | Gland | 2 | ||
| 8 | M20×1.5 | Slotted nut | 2 | ||
| 9 | CL10.5.5-4G | Wheel carrier | 2 | ||
| 10 | GB/T 889.1-2000 | Hexagon lock nut | M14 | 2 | |
| 11 | GB/T 276-94 | Deep groove ball bearing | 6204-2Z | 4 | |
| 12 | CL10.5.5-6 | Shaft sleeve | 2 | ||
| 13 | CL10.5.5-7 | rear-wheel | 2 | ||
| 14 | GB/T 5780-2000 | Hexagonal head bolt | M14×100 | 2 |
Drive assembly
Drive assembly
| No. | Code | Name | Specification | Qty. | Notes |
|---|---|---|---|---|---|
| 1 | GB/T13871-92 | Oil seal | TCφ42×φ20×7 | 1 | |
| 2 | GB/T276-94 | Bearing | 6004RS | 1 | |
| 3 | GB893.1-86 | Hole retaining ring | Φ42 | 1 | |
| 4 | ZD-HZDC-310-002 | Housing component | 1 | ||
| 5 | GB894.1-1986 | Shaft retaining ring | Φ15 | 1 | |
| 6 | ZD-HZDC-320-002 | Rotor | 1 | ||
| 7 | ZD-HCDC-340-001 | Brush holder component | 1 | ||
| 8 | GB/T276-94 | Bearing | 6201RS | 1 | |
| 9 | GB/T70.1-2000 | Hexagon socket screw | M5×16 | 3 | |
| 10 | GB/T93-1987 | Elastic washer | Φ5 | 3 | |
| 11 | ZD-HCDC-361-001 | Rear end cover | 1 | ||
| 12 | ZD-HCDC-330-001 | Electric brush | 4 | ||
| 13 | ZD-HCDC-380-001 | Grommet | 1 | ||
| 14 | ZD-HZDC-362-001 | Brake | 1 | ||
| 15 | GB/T1096-2003 | Button | 5×5×8 | 1 | |
| 16 | 1115-200001-0B | Case cover | 1 | ||
| 17 | GB/T70.1-2000 | Hexagon socket screw | M6×20 | 8 | |
| 18 | GB/T93-1987 | Elastic washer | Φ6 | 8 | |
| 19 | GB/T70.1-2000 | Hexagon socket screw | M8×35 | 5 | |
| 20 | GB/T93-1987 | Elastic washer | Φ8 | 5 | |
| 21 | GB/T70.1-2000 | Hexagon socket screw | M5×20 | 6 | |
| 22 | GB/T93-1987 | Elastic washer | Φ5 | 6 | |
| 23 | GB/T1096-2003 | Button | 5×5×14 | 1 | |
| 24 | GB894.1-1986 | Elastic washer | Φ16 | 1 | |
| 25 | 1115-200005-0B | Plagiodont | 1 | ||
| 26 | 1121-210001-00 | Case cover | 1 | ||
| 27 | GB/T13871-92 | Oil seal | TC∅155×∅172×10 | 1 | |
| 28 | 1115-200002-0B | Straight gear ring | 1 | ||
| 29 | GB/T276-94 | Bearing | 61824-2RS | 1 | |
| 30 | 1115-220000-0B | Driving wheel | 1 | ||
| 31 | GB/T276-94 | Bearing | 61824-2RS | 1 | |
| 32 | 6118003 | Dust ring | 1 | ||
| 33 | JX6-2 | Junction box | 1 | ||
| 34 | JB/T7940.1-1995 | Forced filling oil cup | 1 | ||
| 35 | GB/T1096-2003 | Button | 5×5×20 | 1 | |
| 36 | GB/T119.1-2000 | Locating pin | φ5×15 | 2 | |
| 37 | GB/T13871-92 | Oil seal | TC∅16×∅28×7 | 1 | |
| 38 | GB/T276-94 | Bearing | 61905-2Z | 1 | |
| 39 | 1115-200004-0B | Macrohelical tooth | 1 | ||
| 40 | GB/T276-94 | Bearing | 16003-2Z | 1 | |
| 41 | GB894.1-1986 | Shaft retaining ring | Φ15 | 1 | |
| 42 | 1115-200003-0B | Spur gear | 1 |
Operating handle assembly
Operating handle assembly
| No. | Code | Name | Specification | Qty. | Notes |
|---|---|---|---|---|---|
| 1 | TY-01.20 | Detong handle T606-5 | 1 | ||
| 2 | CLJ1030.01.02.01 | Welded handle rod | 1 | ||
| 3 | CS1232.8-1 | Shock pad | 1 | ||
| 4 | GB/T 70.1-2000 | Hexagon socket head cap screws | M8×35 | 1 | |
| 5 | SL13.03-09 | Spacer sleeve | 1 | ||
| 6 | CJF17-05PA | Proximity switch | 1 | ||
| 7 | GB/T 93-1987 | Elastic washer | Φ3 | 2 | |
| 8 | GB/T 70.1-2000 | Hexagon socket head cap screws | M3×25 | 2 | |
| 9 | CLJ1030.01.02.02 | Gas spring assembly | 1 | ||
| 10 | GB/T 6177.1-2000 | Hexagon flange nut | M8 | 1 | |
| 11 | GB/T 70.1-2000 | Hexagon socket head cap screws | M10×20 | 1 | |
| 12 | GB/T 70.3-2000 | Hex socket countersunk head screw | M8×20 | 1 | |
| 13 | SL13.03-03 | Stop block | 1 | ||
| 14 | SL13.03-02 | Joint seat | 1 | ||
| 15 | TY-02.22 | Composite set with shoulderΦ18×Φ16×10 | 2 | ||
| 16 | SL13.03-07 | Joint axis | 1 | ||
| 17 | SL13.03-04 | Cable ramp | 1 | ||
| 18 | GB/T 818-2000 | Cross recessed pan head screws | M4×10 | 2 | |
| 19 | GB/T 77-2000 | Flat point set screw | M6×8 | 1 | |
| 20 | GB/T 70.1-2000 | Hexagon socket head cap screws | M8×25 | 1 |
Hydraulic system
Hydraulic system
| Np. | Code | Name | Specification | Qty. | Notes |
|---|---|---|---|---|---|
| 1 | CLJ1030.05 | Cylinder subassembly | 1 | ||
| 2 | GB982-77 | Combination gasket | Φ18 | 2 | |
| 3 | CLJ1030.04-1 | Rubber hose | 1 | ||
| 4 | SPN10.8-6 | Oil pipe joint | 1 | ||
| 5 | CLJ1030.01.03.03 | Power unit | 24V/2.2KW | 1 | |
| 6 | CL10.4-3H | 90°joint | 1 |
Electric assembly
Electric assembly
| No. | Code | Name | Specification | Qty. | Notes |
|---|---|---|---|---|---|
| 1 | GB/T 70.1-2000 | Hexagon socket head cap screws | M3×20 | 2 | |
| 2 | GB/T 93-1987 | Elastic washer | Φ3 | 2 | |
| 3 | GB/T 95-2002 | Flat washer | Φ3 | 2 | |
| 4 | TY-01.2 | Charging socket TSB50A／600A | 1 | ||
| 5 | TY-01.18 | Horn DC24-Φ125 | 1 | ||
| 6 | GB/T 95-2002 | Flat washer | Φ8 | 3 | |
| 7 | GB/T 93-1987 | Elastic washer | Φ8 | 3 | |
| 8 | GB/T 70.1-2000 | Hexagon socket head cap screws | M8×12 | 1 | |
| 9 | DK1220.01-2 | Electric control mounting board | 1 | ||
| 10 | 1212P-2502 | Electric control | 1 | ||
| 11 | GB/T 93-1987 | Elastic washer | Φ5 | 4 | |
| 12 | GB/T 70.1-2000 | Hexagon socket head cap screws | M5×35 | 1 | |
| 13 | GB/T 70.1-2000 | Hexagon socket head cap screws | M5×30 | 1 | |
| 14 | TY-02.32 | Fuse holder | 1 | ||
| 15 | GB/T 95-2002 | Flat washer | Φ5 | 2 | |
| 16 | GB/T 70.1-2000 | Hexagon socket head cap screws | M5×16 | 2 | |
| 17 | TY-01.4 | Fuse | CNP-100A | 1 | |
| 18 | GB/T 70.1-2000 | Hexagon socket head cap screws | M8×25 | 2 | |
| 19 | CLJ1030.01.03-1 | Battery limit plate | 1 | ||
| 20 | CLJ1030.01.03-2 | Rubber pad | 2 | ||
| 21 | 6-EVF-100 | Battery | 100AH-12V | 2 | |
| 22 | TY-01.14 | Emergency stop switch ZDK31-250 | 1 | ||
| 23 | GB 973-1976 | Large flat cross screw | M6×12 | 2 |
Lifting system
Lifting system
| No. | Code | Name | Specification | Qty. | Notes |
|---|---|---|---|---|---|
| 1 | SPN10.0-5 | Chain | ISO12A | 2 | |
| 2 | SPN10.0-1 | Chain rod | 2 | ||
| 3 | GB/T 91-2000 | Cotter pin | 2.5×40 | 2 | |
| 4 | GB/T 70.1-2000 | Hexagon socket head cap screws | M8×25 | 16 | |
| 5 | GB/T 93-1987 | Elastic washer | 8×2.1 | 18 | |
| 6 | GB/T 95-2002 | Flat washer | 8×1.6 | 26 | |
| 7 | CL10.7.1 | Guide wheel shaft base | 2 | ||
| 8 | GB/T 276-94 | Deep groove ball bearing | 6204-2Z | 2 | |
| 9 | GB 894.2-86 | Elastic retainer for shaft | 20 | 2 | |
| 10 | GB 893.1-86 | Elastic retainer for hole | 47 | 2 | |
| 11 | CL10.7-3 | Guide wheel | 2 | ||
| 12 | CL10.9 | Left and right limit wheel frame | 2 | ||
| 13 | CL10.8 | Rear wheel stop frame | 2 | ||
| 14 | GB／T308-77 | Steel ball | Φ19.05 | 1 | |
| 15 | GB/T 41-2000 | Hexagon nut | M10 | 2 | |
| 16 | GB/T 93-1987 | Elastic washer | 10×2.6 | 1 | |
| 17 | GB/T 95-2002 | Flat washer | 10×2 | 1 | |
| 18 | GB/T 5781-2000 | Hexagon nut with full thread | M10×65 | 1 | |
| 19 | GB/T 41-2000 | Hexagon nut | M8 | 2 | |
| 20 | SPN10.0-2 | Cylinder collar | 1 | ||
| 21 | GB/T 276-94 | Deep groove ball bearing | 6204 | 2 | |
| 22 | SPN10.2-5 | Sprocket wheel | 2 | ||
| 23 | GB/T 70.1-2000 | Hexagon socket head cap screws | M8×16 | 9 | |
| 24 | CL12JY-02.1 | Inner door frame welding | 1 | ||
| 25 | GB/T 276-94 | Deep groove ball bearing | 6206-2Z | 2 | |
| 26 | GB 893.2-86 | Elastic retainer for hole | 62 | 2 | |
| 27 | GB 894.2-86 | Elastic retainer for shaft | 30 | 2 | |
| 28 | SPN10.2-1 | Inner frame roller | 2 | ||
| 29 | GB/T 93-1987 | Elastic washer | 8×2.1 | 8 | |
| 30 | CL10.2.1 | Guide wheel assembly | 2 |
Tray rack
Tray rack
| No. | Code | Name | Specification | Qty. | Notes |
|---|---|---|---|---|---|
| 1 | CL12JY-03.1 | Welded pallet frame | 1 | ||
| 2 | GB 894.2-86 | Elastic retainer for shaft | 30 | 4 | |
| 3 | GB 893.2-86 | Elastic retainer for hole | 62 | 4 | |
| 4 | GB/T 276-94 | Deep groove ball bearing | 6206-2Z | 4 | |
| 5 | CL10.2-7 | Tray roller | 4 | ||
| 6 | CL12JY-03.2 | Long axis | 4 | ||
| 7 | CL12JY-03.3 | Forging fork(backrest raised) | 2 | ||
| 8 | GB894．1-86 | Elastic retainer for shaft | 32 | 2 |
The manufacturer reserves the right to interpret this parts list.
Read User Manual Online (PDF format)
Loading......