Shenzhen Maikejie Technology M27 Wireless Earphones User Manual
- June 4, 2024
- Shenzhen Maikejie Technology
Table of Contents
Shenzhen Maikejie Technology M27 Wireless Earphones User Manual
Wireless Earphone
Thank you for purchasing our true wireless earbuds Please read this instruction manual carefully before using it.
Care and Maintenance
-
Charge the earbuds at least once every 3 months.
-
Do not store the earbuds in extreme temperatures (< OC or> 45C).
-
Do not use chemicals or detergents to clean the earbuds.
-
Do not drop or knock your earbuds on hard surfaces.
-
Do not scrape the surface with sharp objects.
-
Do not try to dismantle the earbuds.
-
Headphone charging indicator
-
Headphone charging contac
-
Touching the headphones
Usage Instruction
1. Pairing the earbuds with your smartphoneUser Manual
step1 Remove the left/right earphone from the charging base, and press the
multi-function key of the left/right earphone for 5 seconds before the
earphone can be turned on.
Step 2: RED and BLUE LED would start blinking on both the earbuds. Both of the
earbuds would automatically pair with each other in 5 seconds.
Once they are paired with each other, one of the earbuds would show a RED and
BLUE LED blinking alternatively, which means they are ready to pair with your
smartphone.
Step 3: Now switch on Bluetooth in your smartphone and search for nearby
devices and pair with the name: with voice prompt ‘Connected’ after the
pairing succeed. Enter ‘0000’ if prompted for password.
The earbuds would re-connect with smartphone automatically after first
pairing.
2 Multi-function key control in music state
a Touch the left ear/right ear multifunction key once, and the music can be
played/paused.
b Touch the left or right ear multifunction key twice to switch up and down.
c Touch the left or right ear multi-function key three times to switch between
increasing and decreasing volume.
3. During Calls
e Touch the left or right ear multifunction key once to answer the call or
hang up the phone
f Double-click the left and right ears to reject incoming calls
4. Charging the Earbuds & Charging Case
4.1 Put the earbuds in the charging case, the earbuds power off and start
charging automatically. When the earbuds are charging, the earbuds LED glows
RED, and RED LED goes
OFF when they are fully charged.
4.2 When the Case is charging, the case LED indicator blinks, and LED
indicator glows when the case is fully chared.
5. Product Specification
Model name:
Bluetooth version:
Bluetooth name:
Music time: hours
Standby time: Approx. hours
Earbuds battery capacity: 3.7V mAh x 2
Charging case battery capacity: 3.7V mAh
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver i s connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modi?cations to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition, compliance with
exposure requirements.