MPS LUMIR5-50U Laptop User Manual

June 15, 2024
MPS

MPS LUMIR5-50U Laptop

Specifications

  • CPU : AMD Ryzen 5 5500U
  • RAM : 16GB
  • SSD : 1TB
  • Camera : 2MP
  • Power adapter : 19V/3.42A
  • Battery : 11.4V/4500mAh
  • OS : Windows 11

Product Usage Instructions

**Know your team

MPS-LUMIR5-50U-Laptop-FIG- \(1\)**

  1. Integrated camera
  2. Screen
  3. System status indicators
  4. Power button
  5. Keyboard
  6. Touchpad
  7. Built-in microphones

Left side view:

  1. AC adapter connector
  2. USB 3.0 port
  3. Standard HDMI port
  4. TYPE-C

Right side view:MPS-LUMIR5-50U-Laptop-FIG- \(3\)

  1. Micro-SD card reader
  2. Headphone jack
  3. USB 3.0 ports
  4. RJ-45 port

C Side view:

  1. Built-in speakers

Switched on:
Pressing the power button to turn on the computer.

Off:
To turn off the computer, click followed by selecting the option to turn off.

How to use the AC adapter and the battery

  1. Connect the charger to the connector found on the device.
  2. Connect the power cable to the power socket.
  3. The operating system will visually indicate the percentage of the remaining charge. At that moment, it is necessary to connect the charger.

How to activate / Lock the touchpad:
Pressing the Fn + F1 function key activates a system status indicator .

Combinations function key

Key Combination Action
Fn + Esc Activates / Locks the touchpad
Fn + F1 Opens web page
Fn + F2 Activates / deactivates the volume
Fn + F3 Activates / reduces the volume
Fn + F4 Activates / adds the volume
Fn + F5 Activates / adds the WIFI
Fn + F6 Activates / reduces brightness
Fn + F7 Activates / adds brightness
Fn + F8 Plays previous track/chapter
Fn + F9 Plays next track/chapter

System Sleep/Alternative Low Power Mode:
This mode will be activated after 20 minutes of no user activity.

Display Sleep Mode:
This mode will be activated after 15 minutes of no user activity.

Wake On LAN:
Shipped Enabled When Operating on Ac Power Only.

Wake Management:
A user, scheduled, or external event or stimulus that causes the computer to transition from Sleep Mode or Off Mode to an active state of operation. Examples of wake events include, but are not limited to: movement of the mouse, keyboard activity, controller input, real-time clock event, or a button press on the chassis, etc.

Speed of Any Active 1GB/s or higher Ethernet Network Links:
Will be reduced to less than 1GB/s when transitioning to sleep or off mode.

Energy Star certification:
This device has Energy Star certification version 8.0 that guarantees the lowest energy consumption.

Service environment

This device must be used in an environment where the ambient temperature is between 5℃and 35℃.

  • Do not expose the device to rain or humidity and keep it away from liquids. If water or other liquid is spilled on the unit, switch off the unit immediately and wait until it is completely dry before turning it back on.
  • Do not use strong solvents, liquid detergents or other chemicals on or near the surface of the device to prevent corrosion or deterioration of the surface.
  • Do not expose the device to dusty environments.
  • Do not use the device during a gas leak.
  • Do not expose the device to strong magnetic or electrical fields. You can pass the device through airport X-ray detectors.
    • However, it is recommended that you do not pass your device through the magnetic detection portals or expose it to portable detectors.
  • Do not place any objects on the device.
  • Do not place the device on an uneven or unstable surface. Ensure that the device is protected from falls or other shocks that may damage it.
  • Do not leave the device on or in charge on your knees or any other part of your body to avoid the risk of heat-related injuries.
    • Turn off the unit before transporting or covering it with materials that do not allow for optimum air circulation.
  • Do not use damaged power cords, accessories or other peripherals with your device.

We recommend the exclusive use of the accessories (power supply, cables…) supplied with the device.

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm full interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution :
Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. his device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Specific Absorption Rate (SAR) information:
This Device meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.

FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.

Device types:
The device has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the device kept Omm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an 0mm separation distance between the user’s body and the back of the device. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

FAQ’s

What are the specifications of the device?

The device has an AMD Ryzen 5 5500U CPU, 16GB of RAM, 1TB SSD storage, a 2MP camera, and runs on Windows 11.

How do I turn on the computer?

To turn on the computer, simply press the power button.

How do I turn off the computer?

To turn off the computer, click on the start menu, select the option to turn off, and follow the prompts.

How do I activate or lock the touchpad?

To activate or lock the touchpad, press the Fn + F1 function key.

What is the battery life of the device?

The device has a battery with a capacity of 11.4V/4500mAh.

Can I use the device in extreme temperatures?

No, the device should be used in an environment where the ambient temperature is between 5 and 35 degrees Celsius.

Can I expose the device to liquids or strong solvents?

No, the device should not be exposed to rain, humidity, liquids, or strong solvents.

Can I use the device in dusty environments or during a gas leak?

No, the device should not be used in dusty environments or during a gas leak.

Can I pass the device through airport X-ray detectors?

Yes, you can pass the device through airport X-ray detectors. However, it is recommended that you do not pass your device through magnetic detection portals or expose it to portable detectors.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals