Oceanrich G2 Coffee Grinder Electric User Guide

Oceanrich G2 Coffee Grinder Electric

PLEASE READ BEFORE USE

PARTS

ASSESORIES

Operation

Disassemble the washable parts

• Rotate the upper housing, burr mill system and glass jar as the marking of ,
• Hold burr mill system and turn the upper housing in clockwise to separate.
• Hold burr mill system and turn the glass jar in clockwise to separate.

CAUTION

• DO NOT disassemble the burr mill system by yourself, it may cause axis offset and loosening.

Clean before using

• Wash the burr mill system, glass Jar and lid with warm and mild detergent.
•  Thoroughly dry off afterwards.

CAUTION

• DO NOT use any sharp objects or spirit, solvent for cleaning.
• Please clean regularly in order to ensure the ground coffee quality and flavor.

Check battery power

• Please connect with USB cable to charge the battery before first time using or long time no use, and ensure the power is full before using.
• Full charging 1.5 hours in one time, the battery can last about 20 times grinding, 15g each time with medium grinding.
• Suggest charging with 5V adaptor.

CAUTION This grinder cannot work under charging status. Make sure two LED lights up at least for urgent using.

Lock the glass jar
Hold the burr mill system and turn the glass jar in counterclockwise to set up.

Add coffee beans

• Put the coffee beans into bean container,
  • Max.: 30g

CAUTION

• DO NOT put ground coffee to grind again, it may cause idling judgment.

Lock the upper housing on to the burr mill system

• Line the arrow “ ” on the upper housing with , , on the back of the upper housing, turn the upper housing in Lock direction till fasten.

CAUTION

• Make sure to fasten the upper housing, burr mill system and glass jar before using, or it may cause parts separated and ground coffee spraying.

Adjust the coarseness

• Rotate the adjusting ring to select the desired grind levels, from fine to coarse.

CAUTION

• DO NOT adjust the coarseness when grinder is  power on or when there are beans in burr mill system, it can result in product damage.

Switch on for grinding

• Press power switch, blue LED lights up and the grinder starts to work.

CAUTION

• DO NOT disassemble any parts during grinding, it may cause ground coffee spraying or malfunction.
• Suggest connect we use no more than 10 times, or it may cause burr overheating and break the flavor of ground coffee.

Switch off
Once the grinding completed, you can press the power switch to switch off, blue LED goes out.

• This grinder has auto shut-off function. If there is no beans in burr mill system, the grinder will stop after about 10 seconds.
• If there is no beans and the grinder can not stop automatically, please switch off and reset as below: press the power switch until blue LED light runs. When the grinder stops, reset completely. DO NOT reset when burr mill system has beans left inside.

Take out the ground coffee
Hold the burr mill system and turn the glass jar in clockwise, take out the ground coffee.

• Hold burr mill system and turn the glass jar in clockwise to separate.
• The lid on the upper housing can be as the lid of glass jar for convenient storage.

Cleaning & Storage

Cleaning
CAUTION

• Always switch off the grinder before cleaning and allow to cool down.
• Brush the burr mill system and glass jar with the complimentary brush.
• Clean the washable parts with warm water and mild detergent. Thoroughly dry off afterwards.
• Wipe the upper housing with a soft cloth only, slightly moistened if needed.
• Do not use any sharp objects or spirit, solvent for cleaning.
• Never immerse the upper housing in water or other liquids.

Storage

• In case if not in use for a long while, unplug USB cable and put it back to original gift box .

CAUTION

• Avoid direct sun light and/or height humidity storage environment, it may cause malfunction.

Maintenance

Disassemble the burr mill system
Unlock the burr mill system and the glass jar, make the adjusting ring to the maximum, then turn the adjusting nut in counterclockwise to separate.

• When unscrewing the adjusting nut, please keep the upper housing connected with the burr mill system
  in order to fix the cent haft

Disassemble the upper housing

• Hold the burr mill system tightly and rotate the body clockwise.

Remove the parts

• Please remove the parts in proper order and take care of them.

CAUTION

• DO NOT lose any parts, the machine may not work or be broken while working.

Cleaning
Remove the coffee ground on the parts with the complimentary brush, and then rinse with water.

• Clean the washable parts with warm water and mild detergent. Thoroughly dry off afterwards.
• In order to ensure the quality and flavor of coffee ground, the parts should be cleaned regularly.

CAUTION

• DO NOT use any sharp objects or spirit, solvent for cleaning.
• PLEASE remove the parts as this manual strictly, or the machine may not work or be broken while working.

Assembly

• Assemble the parts in proper order after drying, and make sure all parts are installed completely before use.

CAUTION

• Make sure all parts are reassembled and used after drying, otherwise bacteria and mildew may be caused.

Specification

• Specification might very without priory notification.

ocean rich

• www.oceanrich.tw
• Ocean Rich Global Co., Ltd.
• Add: No.3, Xingchang Rd., South Dist., Tainan City 702, Taiwan

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>