DEWALT DC305 Cordless Recimer Saw Instruction Manual
- June 15, 2024
- Dewalt
Table of Contents
DEWALT DC305 Cordless Recimer Saw
Product Information
Congratulations!
Thank you for purchasing the DEWALT device. Extended experience, careful
development, and innovation increase the efficiency of DEWALT professional
power tools and the ability to perform a wide range of work.
Specifications
- Model: DC305
- Voltage: 36 VDC
- Maximum power output: 1710 W
- No-load stroke speed: 0-3000 rpm
- Stroke length: 28.5 mm
- Weight (without battery): 2.7 kg
- Sound pressure level: 86 dB(A)
- Sound power level: 97 dB(A)
- Total weighted vibration acceleration: 13.5 m/s²
- Uncertainty of Measurement 3 dB(A)
- Whole-body Vibration Value 13.5 m/s²
- Uncertainty of Measurement 1.6 m/s²
When estimating vibration exposure, consider how long the tool remains off and how long it operates on idle. The vibration exposure during the entire period of use could be much less with intermittent use.
Product Usage Instructions
Safety Precautions
Before operating the DC305 saber saw, please read and understand the following safety precautions:
Safety in the Work Area:
Keep the work area clean and well-lit to avoid accidents.
Electrical Safety:
- The power cord plug of the power tool must match the electrical outlet and should not be modified.
- When using power tools with protective grounding, do not use any adapter plugs. The original plugs and matching electrical outlets reduce the risk of electric shock.
- Do not expose the power tool to rain or moisture. Water entering the housing can lead to electric shock.
- Handle the cord carefully. Never use the cord for carrying the tool or pulling the plug from the outlet. Protect the cord from high temperatures, oil, sharp edges, and moving parts. A damaged or entangled cord can cause electric shock.
Personal Safety:
- Use personal protective equipment. Always wear safety glasses. Suitable protective equipment, such as a dust mask, footwear with slip-resistant soles, a safety helmet, or ear protectors, depending on the type and application of the power tool, reduces the risk of injury.
- Avoid accidental starting. Before connecting the power tool to the power source, ensure that the switch is in the off position. Carrying a power tool with your finger on the switch or connecting it to the power source with the switch on increases the risk of accidents.
- Before connecting the power tool, make sure that any keys and adjusting tools have been removed. A key left in a rotating part can cause bodily injury.
Battery Information
Model | Voltage | Capacity | Weight |
---|---|---|---|
DE9360 | 36 VDC | 2.0 Ah | 0.9 kg |
DCB360 | 36 VDC | 4.0 Ah | 1.3 kg |
DCB361 | 36 VDC | 2.0 Ah | 0.9 kg |
Charger Information
Model | Input Voltage | Approx. Charging Time | Weight |
---|---|---|---|
DE9000 | 230 VAC | 90 min (4.0Ah) / 45 min (2.0 Ah) | 0.9 kg |
Minimum circuit breaker current rating for electric tools powered at 230 V is 10 A.
Safety Definitions
- WARNING: Informs about a potentially hazardous situation. Failure to comply with this warning could result in death or serious injury. WARNING: Informs about the risk of fire.
- CAUTION: Informs about a potentially unsafe situation. Failure to comply with this caution could lead to a minor or moderate injury. NOTE: Provides important information that does not fit under the warning or caution categories.
Declaration of Conformity with EU Standards
DEWALT declares that the tool described under “Technical Specifications,” model number DC305, has been designed in accordance with the following directives and standards: 2006/42/EC, EN 60745-1, EN 60745-2-11. These products are also in accordance with Directive 2004/108/EC and 2011/65/EU. More information can be obtained at the address provided below or at one of our branches listed at the end of this operating manual.
WARNING: To avoid the risk of injury, please read this operating manual. The signer below is responsible for compiling the technical documentation and makes this declaration on behalf of DEWALT.
General Safety Rules for Electric Tools
WARNING! Familiarize yourself with all the warnings included here. CAUTION: Always wear protective equipment and observe the symbols.
- Work Area Safety: Keep your work area clean and well lit. Clutter and poor lighting increase the risk of accidents.
- Electrical Safety: The plug of the power tool must fit the outlet. It must never be modified in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
- Personal Safety: Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while tired or under the influence of drugs, alcohol, or medication.
- Power Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and more safely at the rate for which it was designed.
- Battery Tool Use and Care: Only charge the battery packs in the charger designed for it by the manufacturer. Inserting the wrong type of battery pack into the charger could result in fire.
Additional Safety Instructions for Reciprocating Saws
- Do not attempt to stop the saw blade with your hands after turning off the saw.
- When not in use, always place the saw on a stable surface where the blade will not cause harm.
- Before starting any cutting operation, remove all nails from the wood or any other foreign objects that might be cut by the saw.
FAQ
What is the voltage of the DC305 saber saw?
The DC305 operates at a voltage of 36 VDC.
What is the maximum power output of the DC305 saber saw?
The DC305 has a maximum power output of 1710 W.
What is the weight of the DC305 saber saw without the battery?
The DC305 weighs 2.7 kg without the battery.
What is the sound pressure level of the DC305 saber saw?
The sound pressure level of the DC305 is 86 dB(A).
How do I ensure electrical safety when using the DC305?
To ensure electrical safety when using the DC305, make sure that the power cord plug matches the electrical outlet and avoid exposing the tool to rain or moisture.
What should I consider when estimating vibration exposure?
Consider the duration of time the tool is switched off and how long it operates on idle, as the vibration exposure over the entire usage period could be significantly lower with intermittent use.
Can the DC305 be used with any battery?
No, only use the batteries specified for this model. Using incorrect batteries can pose a fire risk.
Is it safe to modify the power tool or charger?
No, modifying the power tool or charger can lead to a risk of electric shock, fire, and potentially serious injury.
References
- FIXIT | Customer Experience Company | Usługi serwisowe
- FIXIT RMA
- 2helpU
- Autorizovaný servis elektrického nářadí, půjčovna nářadí, prodejna nářadí
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>