EPSON 111-56-QUM-025 KDS Kitchen Display System Installation Guide
- June 15, 2024
- Epson
Table of Contents
EPSON 111-56-QUM-025 KDS Kitchen Display System
Product Information
- Product Name: Independent Displays
- Model Number: 111-56-QUM-025
- Revision: 3.00
- Manufacturer: Epson
- Trademark: EPSON
- Logomark: EPSON
- Overview: Independent Displays allow the same item to be sent to multiple stations and be handled independently.
- Copyright: 2023 Seiko Epson Corporation
Product Usage Instructions
Configuration
- Select “APPLICATION SETTINGS” from the menu.
- Select “SITE WIDE” from the options.
- Make sure that “POS Menu Routing” is enabled.
- Enable “Independent Displays”.
- Click “SAVE” to save the changes.
- Click “PUBLISH” to apply the changes.
Quick User Manual
For detailed instructions on setting up and using Independent Displays, please refer to the user manual with the following details:
- Model Number: 111-56-QUM-025
- Revision: 3.00
Specifications
- Product Name: Independent Displays
- Model Number: 111-56-QUM-025
- Manufacturer: Epson
- Trademark: EPSON
- Logomark: EPSON
- Overview: Independent Displays allow the same item to be sent to multiple stations and be handled independently.
- Copyright: 2023 Seiko Epson Corporation
FAQ
Q: What is the purpose of Independent Displays?
A: Independent Displays allow the same item to be sent to multiple stations and be handled independently. This can be useful in scenarios where multiple stations need to process the same item simultaneously.
Q: How do I configure Independent Displays?
A: To configure Independent Displays, follow the steps outlined in the “Configuration” section of this guide. Make sure to enable “Independent Displays” in the settings.
Q: Where can I find the user manual for Independent Displays?
A: The user manual for Independent Displays can be found using the model number and revision details provided in the “Quick User Manual” section of this guide.
independent Displays
About this guide:
This guide consists of 2 sections:
- Overview – A detailed description of what this configuration option does in an Epson TrueOrder Kitchen Display System (KDS).
- How to Configure – A procedure to be followed within any KDS setup.
Overview
The Independent Displays configuration option allows items in an order to be
treated independently from other same items in the order when those items are
sent to different displays. If a Hamburger is sent to station1, and the same
Hamburger is sent to station2, then they are not matched by the KDS and are
considered different Hamburgers. Bumping from station 1 will not cause the
Hamburger to be crossed out on station 2.
Note: This ability (option) is only selectable when the KDS is configured
for POS Menu Routing.
Figure 1: Same item sent to 2 different stations are handled independently
EPSON is a registered trademark and EPSON is a registered logomark of Seiko Epson Corporation. All other product and brand names are trademarks and/or registered trademarks of their respective companies. Epson disclaims any and all rights in these marks. Copyright 2023 Seiko Epson Corporation.
How to Configure
This guide assumes that you have a KDS already setup as described by the Epson KDS Quick Start Guides.
- Select “APPLICATION SETTINGS”.
- Select “SITE WIDE”.
- Ensure “POS Menu Routing” is enabled.
- Enable “Independent Displays”.
- Click “SAVE”.
- Click “PUBLISH”.
Independent Displays Quick User Manual
111-56-QUM-025 Rev 3.00