EPSON KDS TrueOrder Kitchen Display System User Manual
- June 15, 2024
- Epson
Table of Contents
EPSON KDS TrueOrder Kitchen Display System
Product Information
Specifications
- Product Model: KDS
- Product Version: 3.00
- Trademark: EPSON
- Trademark Logomark: Seiko Epson Corporation
About this Guide
This guide provides instructions on how to configure the date and time settings for the KDS display. It assumes that you already have a TrueOrder KDS system working.
Overview
The date and time are displayed at the top right of each KDS display and can be configured.
Product Usage Instructions
How to Configure
- Select “Application Settings” from the menu.
- Click on “Site Wide”.
- Click on “Set Current KDS Time”.
The time settings will be transmitted to the POS Connected device first and then propagated to all devices in the system, if there are additional devices. This process may take a few minutes to update.
Time Settings
The system supports time zone settings. Choose your time zone from the drop- down menu to update the master device (if selected) and set the current local time.
NTP Time Server
Specify the NTP Time Server for accurate time synchronization.
Time Setting Actions
- Set Current KDS Time: Sets the date and time for this computer to the KDS system. It does not change the time zone settings.
- Set Time Zone & Time: Sets the date and time for this computer to the KDS system and changes the specified time zone settings.
FAQ
Q: How long does it take for the time settings to update on all devices?
A: The time settings are transmitted to the POS Connected device first and then propagated to all devices in the system. This process may take a few minutes to update on all devices.
Date and Time
About this Guide
This guide consists of 3 sections:
- Overview – Description of what this is in an Epson TrueOrder Kitchen Display System (KDS).
- How to Configure – A procedure that can be followed to configure the TrueOrder KDS system date and time.
- Appendix – Options for time configuration.
Overview
The date and time is displayed at the top right of each KDS display and can be configured.
EPSON is a registered trademark and EPSON is a registered logomark of Seiko Epson Corporation. All other product and brand names are trademarks and/or registered trademarks of their respective companies. Epson disclaims any and all rights in these marks. Copyright 2023 Seiko Epson Corporation.
How to Configure
This procedure sets the current KDS date and time to that of the PC that is running the configurator. This assumes that you already have a TrueOrder KDS system working.
-
Select Application Settings.
-
Click Site Wide.
-
Click Set Current KDS Time.
-
Time settings are transmitted to the POS Connected device first and then propagated to all devices in the system if there are additional devices. This can take a few minutes to update.
Appendix
Time Settings
Time Zone: The system supports time zone settings. Choose your time zone from
the drop-down menu. This will update the master device (If selected) to the
new time zone settings and the current local time.
NTP Time Server: Specifies NTP Time Server.
Time Setting Actions
Set Current KDS Time: Sets the date and time for this computer to the KDS
system. Does not change the time zone settings.
Set Time Zone & Time: Sets the date and time for this computer to the KDS
system. It will also change the specified time zone settings.
Date and Time Quick User Manual
111-56-QUM-021 Rev 3.00