ROMVESEN MP130 Series Digital Voice Broadcasting System User Manual
- June 5, 2024
- ROMVESEN
Table of Contents
ROMVESEN MP130 Series Digital Voice Broadcasting System
Introduction of UAV digital voice broadcasting system
It is composed of MP series UAV propaganda terminal, handheld microphone,
mobile phone APP, remote control APP, etc.
It has the characteristics of high terminal sound pressure, clear voice,
strong penetration and long transmission distance.
Widely applicable to DJI industry UAV and other medium/small UAV carrying. It
plays an important role in mountain and forest search and rescue, park
broadcasting, emergency warning, fire and rescue, emergency dispatching, traffic
diversion, military and police on duty, environmental protection propaganda
and other scenes.
Disclaimer and warning
Thank you for purchasing our products. The content mentioned in this article is related to your safety, legal rights and responsibilities. Before using this product, please read this article carefully to ensure that the product has been set up correctly. Ignoring the instructions and warnings in this article to operate may cause harm to you and your friends. The right to interpret this document and all related documents shall remain with us. All updates are subject to change without prior notice. Please visit www.gzczzn.com for the latest product information.
Cautions
The maximum volume of MP130 series exceeds 130dB, Close use of the product may cause permanent damage to human hearing! Please do not use the maximum volume at close range, or the damage will be borne by yourself!
NOTE
- The PSDK digital voice broadcasting can adjust the Angle. Please do not swing the boom with your hand quickly. Do not rotate the megaphone by hand after electrifying!
- When installing the load equipment, make sure that the adapter ring is properly connected without looseness. Please pay attention to safety when working at height!
- Do not disassemble without authorization, or you will be responsible for the consequences!
The introduction of MP130 V2
The MP130 V2 UAV digital voice Broadcasting system is the UAV‘s’ dedicated
long range acoustic device (LRAD), Strong sound penetration, small size, light
weight, low power consumption, excellent magnetic shielding performance,
specially developed for UAV industry applications. With ultra high sound
pressure, can clearly transmit speech to a distance, effective sound raising
distance up to 500 meters.
The second-generation UAV digital voice broadcasting system was newly
developed and upgraded, greatly improving TTS, real-time propaganda,
background music, automatic music dodge and other experience functions.
- DJI SKYPORT
- The PTZ arm
- Product shape
- Rear cover
Model | MP130 V2 |
---|---|
Size /mm | 140140125 |
Weight /g | 550±5 |
Maximum sound pressure /dB | 130 |
Effective broadcast range /m | 500 |
Directivity/° | 80°x50 ° (Horizontal x Vertical) |
Working temperature /℃ | -20~40 |
Load interface | DJI SKYPORT |
Communications link | DJI UAV link |
Pitch Angle | 0 -90 °(M200 V2 series) |
0 -60 °(M300 series)
Play mode
| Real-time propaganda
Upload the recording
Text-to-speech
Use SD card to play
Mixed play
Audio file storage format| MP3/WMA/M4A /AAC/ FLAC
App support system| CZZN/DJI Pilot
5
How to use the DJI Pilot and CZZN
When the MP130 V2 is mounted to the DJI M300 series UAV and Pilot is turned on, the MP130V2 will be automatically recognized as shown in the picture below.
- Synchronization
- Pre
- Pause
- Next
- Loop
- Volume
- Menu
Settings CZZN Floating Window Use Tutorial
Download address:
http://gzczzn.com/download/ap-p/V2/CZZN-DJI.apk
Or TF card built-in CZZN-DJI. apk. Then insert the TF card into the DJI remote for installation.
-
Click APP to enter the interface
-
Click “Settings”
-
Open the Floating window
-
Allow Floating Windows on the Pilot
-
Click “YES”(after successful setting, it will directly hover on Pilot each time in the future)
-
Setup successful (only for remote control of M300 series)
Introduction to the main interface
- Synchronization
- Text-to-speech
- Use SD card to play
- Real-time propaganda
- Upload the recording
To upgrade the firmware
TF card local upgrade
Put the upgrade package (downloaded from www.gzczzn.com) in the root directory of the TF card, restart the MP130 V2, and the system will automatically complete the upgrade)
For the latest information about MP130 series products or to download the
latest firmware version, please pay attention to the official website of us :
www.gzczzn.com.
If the firmware update of the UAV causes the digital voice broadcasting system
to fail to work normally, please contact the local agent or manufacturer in
time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>