AIYIMA A07 2.0 Channel Power Amplifier User Manual

Table of Contents

AIYIMA-A07-2.0-Channel-Power-Amplifier-product

Specifications:

Front Panel Introduction:

Rear Panel Introduction:

Step 1: Volume Adjustment
Turn the volume knob counterclockwise to the minimum.
Step 2: Speaker Connection
Connect the speaker to the left and right channel output interfaces.
Step 3: Audio Source Connection
Connect the audio source to the audio input via the RCA line. Use the red connector for the right channel and the white connector for the left channel.
Step 4: Multiple Amplifier Connection
If you need to connect multiple amplifiers, connect the AUX output interface of the amplifier to the audio input of the next amplifier.
Step 5: Power Supply Connection
Connect the amplifier to a DC power supply with a maximum voltage of 48V.
Step 6: Power On
Turn on the power switch to start using the amplifier.

Frequently Asked Questions

Q: What is the maximum power output of this amplifier?
A: The maximum power output of this amplifier is 300W+300W.
Q: What is the size and weight of this amplifier?
A: The size of this amplifier is 17810440mm and it weighs 0.55Kg.

Front panel

AIYIMA-A07-2.0-Channel-Power-Amplifier-fig-1

Power switch (up to open)
Volume knob (counterclockwise decrease volume, clockwise increase volume)
Rear panel
AUX output interface ( 3.5mm headphone interface )
Audio input interface ( red for the right channel, white for the left channel )
Right channel output interface ( red is +, black is – )
Left channel output interface ( red is +, black is – )
Power input interface ( DC power supply, maximum 48V )

Turn the volume knob counterclockwise to the minimum
Connect the speaker to the left and right channel output interfaces
Connect the audio source to the audio input via the RCA line
When multiple amplifiers need to be connected, connect the AUX output interface of the amplifier to the audio input of the next amplifier
Connect to the DC power supply
Turn on the power switch.5mm headphone interface )

POWER	300W+300W	VOLTAGE	24-48V
GAIN	21.5dB	RESPONSE	20HZ-20KHZ±3dB
THD+N	0.008%	SIZE	17810440mm
SNR	110dB	WEIGHT	0.55Kg

Pay attention to before use:

Only a DC power supply can be used. Ac transformer needs to be less than 48V after
Audio electronic products pay attention to the reasonable combination of use so that they can achieve the greatest value and auditory experience. Please choose a reasonable power supply and passive speaker before use. The output power varies according to the speaker impedance.The best match is 1.2-1.5:1 (that is, the speaker power is 50W, and the amplifier power is 60W-75W)
Maximum power in power 48V, 4Ω speakers, distortion of 10% when measuring the resulting power
please check it before using: When you receive the machine and find that the audio input and output interface knobs are relatively loose, Please tighten it manually by yourself.
Please use a good quality audio cable and power supply to avoid the distortion of the machine due to these.
We will provide good customer service and warranty service for our brand products. For any questions, please contact our customer service team: erin@aiyima.com.

Shenzhen Yima Technology Co., Ltd

Location: 4F, Building 7 Hekan industrial park. Wuhe South Road 41. Long-Gang district. Shenzhen. CHINA. 518000
Website: www.aiyima.com.
Telephone: 86-0755-28268551
Email: sale@aiyima.com.
VK: https://vk.com/aiyima.