AIYIMA A02 Bluetooth 5.0 2.0 Channel Power Amplifier User Manual
- June 13, 2024
- AIYIMA
Table of Contents
AIYIMA A02 Bluetooth 5.0 2.0 Channel Power Amplifier User Manual
Shenzhen Ylma Technology Co.,Ltd
Webslte:www.alylma.com
Telephone: 86-0755-28268551
Email: [email protected]
VK: https:/lvk.com/aiyima
Location: 4F, Building 7 Hekan industrial park. Wuhe south road 41. Long-Gang district. Shenzhen. CHINA. 518000
Panel Description
Use Steps
Steps To Use a Wired Connection
- Turn the multi-function knob counterclockwise to the minimum
- Connect the speakers to the left and right channel output
- Connect the audio source to the audio input through the RCA cable
- Connect the DC power supply, long press the multi-function knob, wait for 3 seconds, and then the backlight of the VU meter will light up, indicating that the amplifier is activated. If the LED light is off. it is RCA input mode. If the LED is on, short press the multi-function knob to switch to RCA input mode
- The audio source plays music, turn the multi-function knob clockwise to increase the volume to enjoy the music
Steps to use the Bluetooth
- Turn the multi-function knob counterclockwise to the minimum
- Connect the speakers to the left and right channel output interfaces
- Connect the DC power supply, wait for 3 seconds, the backlight of the VU meter will light up, then the amplifier is on .
- The led light is on for the bluetooth input mode. If the led light is off, short press the multi-function knob to switch to the bluetooth input mode
- Turn on the bluetooth function of the mobile phone, search for bluetooth, the bluetooth name of the amplifier is “AIYIMA”, find the bluetooth name and click connect
- Play music on the phone, turn the multi-functio
How to turn on and off the machine
After amplifier powered on, long press the multi-function knob for 3 seconds
and then it turn on. In the standby state, long press the multi-function knob
for 3 seconds, the backlight of the VU meter will dim, and the shutdown is
successful. If the backlight does not go out, try to long press the multi-
function knob again.
How to switch input
In the power-on state, short press the multi-function knob to switch the input
mode, the bluetooth indicator light is on, it means it switch to bluetooth
mode, and the light is off, it means it switch to the wired connection mode.
Specifications
Notes
- Only DC power supply available!, please use DC power supply with voltage regulation
- The output power will vary according to the speaker impedance
- The maximum power is the measured when the power supply is DC 24V 4.5A, 40 speaker, and the distortion is 10% .
Read More About This Manual & Download PDF: