amazon basics B09SJ63HGD Room Darkening Blackout Double Curtain Rod Instruction Manual

: June 15, 2024
: amazon basics

Table of Contents

Important Safeguards
Installation
Cleaning and Maintenance
Specifications
Feedback and Help
Read User Manual Online (PDF format)
Download This Manual (PDF format)

amazon basics B09SJ63HGD Room Darkening Blackout Double Curtain Rod

Important Safeguards

Symbol Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.

When using the product, basic safety precautions should always be followed to reduce the risk of injury including the following:

Use the product for hanging curtains only.
This product is shipped fully assembled. Before use verify that all the components are secure.
Do not tug on the product.
Do not let children climb on or play with the product.
Do not use this product if any parts are missing, damaged, or worn.
Regularly examine the product for wear and tear. Stop using the product at first sign of damage or if parts become detached.

Risk of suffocation!
Keep any packaging materials away from children and pets – these materials are a potential source of danger, e.g. suffocation.

Installation

**** Do not drill into any pipes or power lines beneath the surface during mounting holes preparation.

Installing the product in spaces that do not need the maximum length of the product gives a stronger bearing to hold the curtains.

Tools needed:

Tools needed

Select the suitable mounting position. Use a voltage/metal detector before drilling any holes to eliminate any potential risks (Fig. 1 ).
Use the back bracket as a guide and use a pen to mark the holes on the wall (Fig. 2).
Use a 1 /4″ (6 mm) drill bit and drill the holes into the wall (Fig. 3).
Insert 6 dowels into the holes (Fig. 3).
Insert 6 screws into the back brackets and mount them on the wall (Fig. 4).
Screw the left rod on the window side into the left bracket (Fig. 5).
Place the rod into the center bracket.
Temporarily screw the right rod on the window side into the right bracket (Fig. 5).
Unscrew the right rod again (Fig. 6).
Feed the drapery panel through the rod. Lift the rod slightly to pull half of the drapery behind the center bracket (Fig. 6).
Finally screw the right rod on the window side back into the right bracket to secure it.
Screw the left rod on the front side into the left bracket (Fig. 7).
Place the rod into the center bracket.
Temporarily screw the right rod on the front side into the right bracket (Fig. 7).
Unscrew the right rod again (Fig. 8).
Feed the drapery panel through the rod. Lift the rod slightly to pull half of the drapery behind the center bracket (Fig. 8).
Finally screw the right rod on the window side back into the right bracket to secure it.
Wrap and tuck the panel around both ends of the bracket so that the panel hangs flush with the wall (Fig. 9).

Cleaning and Maintenance

To clean the product, wipe with a soft, slightly damp cloth.
Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.