TECKNET X315 Ultra Slim Wireless Mini Keyboard User Manual

TECKNET X315 Ultra Slim Wireless Mini Keyboard

Product Layout

Note:
Please install batteries according to the polarity (+ and -); do not mix different types of battery; do not use old and new batteries; remove batteries if the device is not going to be used for extended periods of time; always store batteries in a cool, dry place and keep away from children.

Operating Instructions

1. Turn the keyboard upside down, open the lid and remove the 2.4G Nano receiver.
2. Insert two AAA batteries as shown picture on the left. Close the batteries cover.
3. Plug the 2.4G Nano receiver into a USB port of your computer.
4. Turn it the keyboard upside down and turn on using the power switch. The keyboard is now ready for use.

FN+

Note: The FN+F8 key combination is not functional in the non-system built-in player software.

Technical Specifications

• Working distance：10m/32ft
• Working voltage：3V
• Working current：1.5mA (light off)
• Transmission Power: 1.5dBm
• Sleep current：0.002mA
• Sleep time：3 seconds
• Wake method：Press any key

Status Display LED

• Low voltage indication light : Red Colour
• Below 2.0V, red light will flash
• Caps lock : Green

Copyright
It is forbidden to reproduce any part of this quick start guide without the permission of seller.

Troubleshooting
Please contact the after-sales service.

Safety instructions
Do not open or repair this device, Do not use the device in a damp environment. Clean the device with a dry cloth.

Keyboard Maintenance

1. Keep the keyboard away from liquid or humid environment, saunas, swimming pool, steam room and don’t let the keyboard get wet in the rain.
2. Don’t expose the keyboard at too high or too low temperature condition.
3. Don’t put the keyboard under the sun for a long time.
4. Don’t put the keyboard close to the flame, such as cooking stoves, candles or fireplace.
5. Avoid sharp objects or scratching products. To ensure normal operation, replace batteries in a timely manner.

FAQ

1. The 2.4G Nano receiver unrecognized?
   If the 2.4G Nano receiver unrecognized, please check the USB interface is functioning.

2. Why does the red light always flash while in use?
   The flashing red light indicates low battery power; please replace the batteries.

3. The screen display says the 2.4G Keyboard is disconnecting?
   To save battery power, the 2.4G keyboard will go into “sleep mode” if it is not used for some time.
   Press any key to wake the device.

4. Code missing
   Please plug the 2.4 G Nano receiver again, after the computer has been recognized, press the ESC+Q key and turn on the keyboard, the keyboard will be connected successfully.

IMPORTANT SAFETY INSTRUCTIONS

1. SAVE THESE INSTRUCTIONS – This sheet contains important safety and operating instructions.
2. Before using the product, read all instructions and caution markings on the product, accessories and device using our product.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
4. Children should be supervised to ensure that they do not play with the appliance.
5. Keep the product away from fire or explosion may occur.
6. For proper insertion, please observe polarity indicators (+/-).
7. Remove the batteries if the product is not going to be used for a long period of time.
8. Do not place product in or near inflammable, explosive or hazardous object.
9. Do not place in or near water, rain, excess moisture or extreme heat.
10. Do not operate product with damaged cord or plug.
11. Do not operate product if it has been damaged in any way.
12. Do not disassemble the product. Disassembly may result in a risk of safety hazards.
13. Do not throw or shake the product.
14. To reduce the risk of electric shock, disconnect the product from the power supply when not in use or switch off the power supply.

Limited 12-Month warranty

What this warranty covers.
Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to the original purchaser of this TECKNET product that the product shall be free of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Unichain warrants the TECKNET product for 12 Months.

What will we do to correct problems?
Unichain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).

What is not covered by this warranty?
All above warranties are null and void if the TECKNET product is not provided to Unichain for inspection upon Unichain’s request at the sole expense of the purchaser, or if Unichain determines that the TECKNET product has been improperly installed, altered in any way, or tampered with. The TECKNET Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (e.g. brownouts or sags), non-authorized program, or system equipment modification or alteration.

How to claim the warranty
Please contact retailers or visit TECKNET website or email support@tecknetonline.com for more information. To extend the warranty period, please visit TECKNET website and register your TECKNET products within 90 days of purchase.

Disclaimer
Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein.

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type X315 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://eu.tecknetonline.com/

Correct Disposal of This Product
( Waste Electrical& Electronic Equipment )
This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

References

• TECKNET EU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>